All in one lv2424

The Split Phase LV series inverter family features inverters that can support 120V/240V split phase output which is the main power standard used in North American countries including US, Canada, Mexico, and Puerto Rico.  Split phase system is defined as having 2 x 120V hot wires (normally denoted as L1 and L2 and each hot wire is 120V in relation to the neutral wire), 1 neutral wire, and a ground wire.  By using the two opposite phase hot wires together 240V is created between L1 and L2.

LV2424 is a max 2400w/24vdc inverter with 110/120V output and supports both 50Hz or 60Hz frequency.  By wiring at least 2 units of LV 2424 parallel, the system can create split phase output, as illustrated below.  Maximum parallel operation supported by LV2424 is up to 9 units and possible configurations include: single phase, split phase and 3-phase applications.

LV5048 and LV6048, 5KW/48V and 6KW/48V respectively, are the only two models that are capable of creating split phase output without the use of parallel.  These models can parallel up to 3 units, and from which one can configure system as 3-phase output 208V (phase to neutral).

Along with a built-in MPPT solar charger and large utility charger, these split phase LV models offer excellent versatility and flexibility to expand and are ideal for off-grid / grid optional use.

For more information, please download the catalogs at the tab page above or contact our sales office at [email protected]

better than the LV2424MSD IMHO

NOTE : TWO INVERTERS are required for split phase operation, as well as a parallel kit for each inverter.  (One inverter per phase)

USA Stock is import duty free!

USA Returns  (If you buy from Taiwan, expect to pay hundreds of dollars in return shipping)

USA 1 yr warranty.

USA Tech Support

Now supports Wifi remote monitoring on the www.  (on ebay search “seller:usa-mpp-solar”  to find our WiFi Box Listing)

Manuals can be found here:

https://usamppsolar.com/manuals/LV2424%20hybrid%20manual-20190717.pdf

https://usamppsolar.com/manuals/WiFi-Monitor/Wifi%20box%20&%20card%20quick%20settings.pdf

This is a listing for ONE Hybrid LV2424 3kVA 2400W 110/120V inverter , 80A MPPT solar charger, and built in 60A Utility charger to keep your batteries charged if the Sun is inadequate, or your batteries are just running low in the middle of the night.

Runs on a 24VDC Battery bank. LiFePO4 + Lithium Ion support.

Supports grid tie and off grid functionality not UL Listed.

5.5-in-1  unit.

1) 2400 W Pure Sine wave output expandable up to 9 units (21.6 kW)

2) 2kW MPPT Solar Charge controller

3) 60 A Utility Battery Charger  (In case your battery level falls below your setpoint

4) UPS function, wire it to the Utility power, if battery power is too low, the system automatically switches the load to Utility power

5) Single 120V 60Hz , Split phase (120V – 0 – 120V ) and 3 phase capable (requires parralel board for each unit)

5.5) Grid Tie function ( Anti Islanding, – Note: This inverter is NOT UL listed in the USA, for DIY enthusiast only, it is CE listed for European markets) – Send your excess power to slow your existing meter, once batteries are fully charged

If you need two units for split phase operation, see our split phase listing. This unit excludes the parallel module, whereas the other bundled listings includes it.
This unit will operate just fine on its own for single phase 110V/120V, and is upgradable / stackable for future single / split phase or three phase operation. An excellent start to grow your installation, or if you just simply need one more inverter to add to your existing array.

Stackable up to 9 units in any configuration up to 2.4kW x 9 = 21.6kW

Description

Manual

USA Returns  (If you buy from Taiwan, expect to pay hundreds of dollars in return shipping)

USA 1 yr swap out warranty.

This listing includes 2 x Hybrid LV2424 with 2 x Parallel kits ($62 each)  (4800W at 24V)

Save over $100 on individual prices + shipping

Download the user manual at:

Hybrid LV2424 Manual

For Each Hybrid LV2424 – 5.5-in-1 Unit::

1) 2400 W Pure Sine wave output expandable up to 9 units (21.6 kW)

2) UPS function, built in 40A transfer relay ( switches to Utility upon low battery power)

3) 2000 W MPPT charge controller (30 to 115V PV Vmp DC Voltage – max 80A)

4) 60A Automatic Utility Battery Charger (Protect your batteries Should they run low during poor Sunlight conditions)

5) Single 120V 60Hz , Split phase (120V – 0 – 120V ) and 3 phase capable (requires parralel board for each unit)

5.5) Grid Tie function ( Anti Islanding, – Note: This inverter is NOT UL listed in the USA, for DIY enthusiast only, it is CE listed for European markets) – Send your excess power to slow your existing meter, once batteries are fully charged

This is a listing for ONE Hybrid LV2424 3kVA 2400W 110/120V inverter , 80A MPPT solar charger, and built in 60A Utility charger to keep your batteries charged if the Sun is inadequate, or your batteries are just running low in the middle of the night.
Runs on a 24VDC Battery bank. LiFePO4 + Lithium Ion support.
Supports grid tie and off grid functionality not UL Listed.

If you need two units for split phase operation, see our split phase listing. This unit excludes the parallel module, whereas the other bundled listings includes it.
This unit will operate just fine on its own for single phase 110V/120V, and is upgradable / stackable for future single / split phase or three phase operation. An excellent start to grow your installation, or if you just simply need one more inverter to add to your existing array.

Stackable up to 9 units in any configuration up to 2.4kW x 9 = 21.6kW

Software included.

User manual can be found at:

http://watts247.com/manuals/mpp/SPLIT%20PHASE%20LV/LV2424%20hybrid%20manual-20190717.pdf

Parallel Diagram:

http://watts247.com/manuals/mpp/SPLIT%20PHASE%20LV/supplement%20parallel%20diagram%20to%20SPLIT%20PHASE%20LV.pdf

Additional information

Description

*special order only – prepaid only – usually 3 weeks lead time. 

• • • 2400W 24V

    • 80A 24V Solar Charge Controller

    • 60A Ac Charger

    • Supports up to 2000W of Solar

    • CAN be paralleled up to 6 units

    • Split phase capable with 2 + units in parallel

    • Not CSA or UL Listed, so cannot be grid tied – needs field certification

This product includes a 2400W Solar Charge Inverter with 24V DC Power, a MPPT 80A Charge Controller and a 60A AC charger, it’s all in ONE Hybrid Solar System.

Ideal for RV’s , Cabins and homes with 24V battery power, can start your generator automatically / or j just switch over to utility power if battery runs low during poor daylight / night time. (and recharge the battery at the same time). Perfect for keeping your furnace/ electrical refrigerator running through the night without having to run the generator to keep the battery charged.

Features

• 110V / 120V adjustable output design for low voltage area like North America
• Pure sine wave inverter with built– in solar controller
• 80A MPPT built-in solar charger
• 50Hz & 60Hz support
• Selectable AC input volt range65-140VAC * depending on mode.
• Parallel-ready, but needs 2+ units and 2 parallel kits to function in parallel
• CAn be split phased with parallel operations (you need 2 units)
• Programmable parameters
• 60A charging from AC (grid or generator**)
• This is not for grid tie, it is only for off-grid use
• Adjustable bulk & float charging voltage
• Genset starter dry contact
• Overload and short circuit protection
• Lightweight, easy to install
• FREE monitoring software
• LCD Display + LED indicators

**requires inverter-type generator of acceptable output quality

ELECTRICAL SPECIFICATIONS
Max Continuous Power: 2400W
Parallel Capability: Yes, with parallel kit, up to 6 units
Input Voltage Range: 65~140VAC (Appliance mode), 95~140VAC (UPS mode)
Input/Output Frequency: 50Hz/60hz Auto sensing
Output Voltage: 120VAC  and 240VAC ±5% user selectable
Output Waveform: Pure Sine Wave
Peak Efficiency: 91%
Nominal DC Voltage: 24V
Max DC Voltage (battery): 31V
Transfer Time: <10ms (UPS mode), <20ms (Appliance mode)
Charging Mode: 3-stage
AC Recharging Current: 60A
No Load Power Consumption: <50W
Power Saving Mode: <15W

SOLAR CHARGER
Algorithm: MPPT
Max PV Input / Output: 2000W
Max Charging Current: 80A
Max PV Input Voc: 145V
MPPT Range: 30V-80V DC
Number of PV input: 1 per unit
Standby Power: 2W

ENVIRONMENTAL / MECHANICAL SPECIFICATIONS

Genset Starter: This port will send a signal to a compatible generator and start it up when solar battery is low. Requires compatible generator with autostart.

Communication: USB and RS232
Operating /Storage Temperature.: 0°C ~ 50°C / -15C-+60C
Operating Humidity: 20~90%RH Non-Condensing
Dimension: 468 x 295 x 120 mm
Net Weight 12kg

PIP-LV Spec Sheet: 

PIP-LV Spec

Volume discount for 2+ Purchases. 

Related products