Edelbrock performer intake pontiac

Edelbrock performer intake pontiac DEFAULT

Performer RPM Pontiac 326-455 Intake Manifold

Reviews

No reviews added

Write Your Own Review

Details

Edelbrock part #7156 Performer RPM Pontiac intake manifold is designed for 1965-79 street 326-455 c.i.d. Pontiac V8's (except Ram Air V and 265/301 V8's). Recommended for high-performance street, strip and marine. Has clearance for HEI distributor. Will not fit under Trans Am Shaker hood without modifications

Specs

Availability Available
Application Application Specific
UPC 00085347071562
Series Performer RPM
Gasket Or Seal Included No
Vehicle Model Pontiac
Availability Note Available to Order
Warranty 12 Months
Ec Basic Operating Rpm Range 1500-6500 RPM
Emissions Code
Hazardous Materials WarningWARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes
  • Recommended intake gasket: Edelbrock #7280; No provisions for OEM choke; OEM carb requires conversion to electric/manual choke; Carb recommendations: Edelbrock Thunder Series AVS, AVS2 or Performer Series 650-800 cfm.; For 1968-71 use Edelbrock #8015 throttle bracket; Manifold height: 1-1/4" taller than stock, A-6.88", B-8.00" measured to engine block; Carb pad height: 7.45"; Port exit dimensions: 1.10" x 2.06"; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Center Maximum Height 7.450 in
CNC Ported No
Finish Satin
Front Maximum Height 6.880 in
Material Aluminum
Rear Maximum Height 8.000 in
Single Or Dual Plane Type Dual
Sours: https://www.edelbrock.com/performer-rpm-pontiac-326-455-intake-manifold-7156.html

Performer Intake Manifold for 1965-79 Pontiac 326-455 Non-EGR, Black Finish

Reviews

No reviews added

Write Your Own Review

Details

Edelbrock part #21563 Performer Pontiac intake manifold is designed for 1965-79 Pontiac 326-455 c.i.d. V8's (except Ram Air V and 265/301 V8's). Provides great throttle response for performance you can feel. Ideal for cars, 4x4s, tow vehicles, RVs and boats. This manifold offers a durable black power coated finish for long lasting protection and a distinctive look.

Specs

Availability Available
Application Application Specific
UPC 00085347215638
Series Performer
Grade Type Performance
Gasket Or Seal Included No
Vehicle Model Pontiac
Availability Note Available to Order
Warranty 12 Months
Ec Basic Operating Rpm Range Idle-5500 RPM
Emissions Code
Hazardous Materials WarningWARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes
  • Recommended intake gasket: Edelbrock #7280.; For 1968-71 use Edelbrock #8015 throttle bracket.; Manifold height: A-5.50", B-6.60" measured to engine block same as stock 4-bbl. intake; Carb pad height: 6.05"; Carb recommendations: OEM 4-Bbl, Edelbrock AVS2 or Performer Series 600-800 cfm.; Port exit dimensions: 1.06" x 1.92"; For Trans Am use OEM 4-bbl. carb for Shaker Hood clearance.; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Center Maximum Height 6.050 in
CNC Ported No
Finish Black Powder Coated
Front Maximum Height 5.500 in
Material Aluminum
Rear Maximum Height 6.600 in
Single Or Dual Plane Type Dual
Sours: https://www.edelbrock.com/performer-pontiac-intake-manifold-21563.html
  1. Funny car memes
  2. Making fused glass jewelry
  3. Xperia z3 model number
  4. Nicotine vape pen reviews
  5. Uke barre chords
Intakes & Accessories - Edelbrock Intakes
Edelbrock Dual-Quad Pontiac Intake Manifold EDL-5450Edelbrock Dual-Quad Pontiac Intake Manifold EDL-5450New

Low Rise 2 x 4 Dual Plane Aluminum Intake. (Cannot be used with HEI)

Item #: EDL-5450EdelbrockEdelbrock Intakes

USD425.46425.461425.46

Edelbrock Performer Intake Manifold, Black, PONTIAC 326-455 V8 EDL-21563Edelbrock Performer Intake Manifold, Black, PONTIAC 326-455 V8 EDL-21563New

PONTIAC 326-455 V8 PERFORMER PONTIAC (IDLE-5500 RPM) Designed for 1965-79 Pontiac 326-455 c.i.d. V8's (except Ram Air V and 265/301 V8's). Pontiac intake manifolds provide great throttle response for performance you can feel. Dual Plane

Item #: EDL-21563EdelbrockEdelbrock Intakes

USD472.45472.451472.45

Edelbrock Performer Intake Manifold, Satin, PONTIAC 326-455 V8 (EGR) EDL-3756Edelbrock Performer Intake Manifold, Satin, PONTIAC 326-455 V8 (EGR) EDL-3756New

Intake Manifold, Performer, Dual Plane, Aluminum, Natural, Square/Spread Bore, Pontiac, 326-455, (FOR EGR APPLICATIONS) Each

Item #: EDL-3756EdelbrockEdelbrock Intakes

USD373.75373.751373.75

Edelbrock - Edelbrock Performer Intake Manifold, Satin, PONTIAC 326-455 V8 (EGR) EDL-3756
Intakes & Accessories - Edelbrock Intakes - Edelbrock - Edelbrock Performer Intake Manifold, Satin, PONTIAC 326-455 V8 (EGR) EDL-3756

Edelbrock Performer Intake Manifold, Satin, PONTIAC 326-455 V8 (EGR) EDL-3756

Description: Intake Manifold, Performer, Dual Plane, Aluminum, Natural, Square/Spread Bore, Pontiac, 326-455, (FOR EGR APPLICATIONS) Each

Item #: EDL-3756

Condition: New

Please Call for Availability

Edelbrock Performer Intake Manifold, Satin, PONTIAC 326-455 V8 (NON-EGR) EDL-2156Edelbrock Performer Intake Manifold, Satin, PONTIAC 326-455 V8 (NON-EGR) EDL-2156New

PONTIAC 326-455 V8 PERFORMER PONTIAC (IDLE-5500 RPM) Designed for 1965-79 Pontiac 326-455 c.i.d. V8's (except Ram Air V and 265/301 V8's). Pontiac intake manifolds provide great throttle response for performance you can feel. Dual Plane

Item #: EDL-2156EdelbrockEdelbrock Intakes

USD373.95373.951373.95

Edelbrock Performer RPM Pontiac Intake Manifold, EnduraShine EDL-71564Edelbrock Performer RPM Pontiac Intake Manifold, EnduraShine EDL-71564New

A desirable choice for modified street engines where more airflow is required street and strip applications. 7/8" taller than stock

Item #: EDL-71564EdelbrockEdelbrock Intakes

USD0.000.0010.00

Edelbrock Performer RPM Pontiac Intake Manifold, Satin EDL-7156Edelbrock Performer RPM Pontiac Intake Manifold, Satin EDL-7156New

A desirable choice for modified street engines where more airflow is required street and strip applications. 7/8" taller than stock

Item #: EDL-7156EdelbrockEdelbrock Intakes

USD392.95392.951392.95

Edelbrock Super Victor EFI Pontiac Intake Manifold, Based on #2956 EDL-29565Edelbrock Super Victor EFI Pontiac Intake Manifold, Based on #2956 EDL-29565New

EFI Ready

Item #: EDL-29565EdelbrockEdelbrock Intakes

USD540.70540.701540.70

Edelbrock Super Victor EFI Pontiac Intake Manifold, Based on #2957 EDL-29575Edelbrock Super Victor EFI Pontiac Intake Manifold, Based on #2957 EDL-29575New

EFI Ready

Item #: EDL-29575EdelbrockEdelbrock Intakes

USD617.95617.951617.95

Edelbrock Torker II EFI Pontiac Intake  Manifold EDL-50565Edelbrock Torker II EFI Pontiac Intake Manifold EDL-50565New

The Torker II manifold by Edelbrock is a superior high performance single plane intake for Pontiacs. This intake is good for Pontiacs with ported heads that demand high airflow. Especially good on 389, 400, and 428 engines. EFI Ready

Item #: EDL-50565EdelbrockEdelbrock Intakes

USD433.95433.951433.95

Edelbrock Torker II Pontiac  Intake Manifold EDL-5056Edelbrock Torker II Pontiac Intake Manifold EDL-5056New

The Torker II manifold by Edelbrock is a superior high performance single plane intake for Pontiacs. This intake is good for Pontiacs with ported heads that demand high airflow. Especially good on 389, 400, and 428 engines.

Item #: EDL-5056EdelbrockEdelbrock Intakes

USD381.95381.951381.95

Edelbrock Victor Series Intake Manifold, PONTIAC 326-455 V8, for standard flange carburetors EDL-2957Edelbrock Victor Series Intake Manifold, PONTIAC 326-455 V8, for standard flange carburetors EDL-2957New

Excellent competition intake for highly modified cast iron heads or aluminum heads. 850 Holley Carburetor 1 3/4" taller than stock Single Plane

Item #: EDL-2957EdelbrockEdelbrock Intakes

USD492.95492.951492.95

Edelbrock Victor Series Intake Manifold, PONTIAC 326-455 V8, for 4500 Series carburetors EDL-2956Edelbrock Victor Series Intake Manifold, PONTIAC 326-455 V8, for 4500 Series carburetors EDL-2956New

Victor Series- 1050 Dominator Carburetor 1 3/4" taller than stock Single Plane

Item #: EDL-2956EdelbrockEdelbrock Intakes

USD451.05451.051451.05

Offenhauser Pontiac Low Rise 2X4 Intake Manifold 1965 & UpOffenhauser Pontiac Low Rise 2X4 Intake Manifold 1965 & UpNew

Pontiac Low Rise 2X4 Intake Manifold 1965 & Up*Holley and Carter AFB bolt pattern*

Item #: OFF-5499Butler PerformanceEdelbrock Intakes

USD799.95799.951799.95


Copyright © 2021 Butler Performance Inc.. All Rights Reserved.
Powered by Web Shop Manager.

TopSours: https://butlerperformance.com/c-1234813-intakes-accessories-edelbrock-intakes.html

Performer Intake Manifold for 1965-79 Pontiac 326-455 Non-EGR

Reviews

No reviews added

Write Your Own Review

Details

Edelbrock part #2156 Performer Pontiac intake manifold is designed for 1965-79 Pontiac 326-455 c.i.d. V8's (except Ram Air V and 265/301 V8's). Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. This Performer intake manifold is ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs.

Specs

Availability Available
Application Application Specific
UPC 00085347021567
Series Performer
Grade Type Performance
Gasket Or Seal Included No
Vehicle Model Pontiac
Availability Note Available to Order
Warranty 12 Months
Ec Basic Operating Rpm Range Idle-5500 RPM
Emissions Code
Hazardous Materials WarningWARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes
  • Recommended intake gasket: Edelbrock #7280.; For 1968-71 use our #8015 throttle bracket.; Manifold height: A-5.50", B-6.60" measured to engine block same as stock 4-bbl. intake; Carb pad height: 6.05"; Port exit dimensions: 1.06" x 1.92"; For Trans Am use OEM 4-bbl. carb for Shaker Hood clearance.; Choke Plate included; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Center Maximum Height 6.050 in
CNC Ported No
Finish Satin
Front Maximum Height 5.500 in
Material Aluminum
Rear Maximum Height 6.600 in
Single Or Dual Plane Type Dual
Sours: https://www.edelbrock.com/performer-pontiac-intake-manifold-2156.html

Intake pontiac performer edelbrock

Mikhail reminded everyone that respect and affection should be shown to the girls, after all, this is the first time for girls. Svetlanka also undressed and ran. Between couples. Where she strokes a girl's ass with a crack, cuddles her breasts, where she guides a man along his chest or. Back, or cuddles herself.

1972 cast iron pontiac intake vs edelbrock performer

A guy and a girl sat down on a nearby bench. They were talking. She suddenly noticed what we were doing. And she looked at us.

You will also like:

Calm down, baby. - Kira always addressed Nastya as a child, - You didnt do anything to me, but you could. - all this time Kira looked into the eyes of Nastya, who was very embarrassed by this.



38664 38665 38666 38667 38668