Headphones for galaxy s9

Headphones for galaxy s9 DEFAULT

Samsung Galaxy S9 Headphone Jack Replacement

  • Before you begin, switch off your phone.
    • Before you begin, switch off your phone.

    • Apply a heated iOpener to a long edge of the phone to loosen the adhesive beneath the rear glass. Apply the iOpener for at least two minutes.

    • You might need to reheat and reapply the iOpener several times during the removal procedure to get the adhesive warm enough to cut. Follow the iOpener instructions to avoid overheating.

    • The adhesive of the Samsung Galaxy S9 is very strong. A hair dryer, heat gun, or hot plate may also be used if you aren't able to open the device with the iOpener. Be careful not to overheat the phone—the AMOLED display and internal battery are both susceptible to heat damage.

    Edit

  • In the following steps, you'll be cutting through the adhesive securing the back cover.
    • In the following steps, you'll be cutting through the adhesive securing the back cover.

    • The adhesive in the inside of the back cover is laid out as seen in the image.

    • You'll be slicing through the adhesive in the areas shown:

    • Thick portions of adhesive

    • Thin areas of adhesive

    • Avoid prying or slicing in this area, to protect the fingerprint sensor flex cable.

    Edit

  • If the phone's rear glass is cracked, the suction cup may not stick. Try lifting it with strong tape, or superglue the suction cup in place and allow it to cure so you can proceed.Press a suction cup onto the back cover.Lift the back cover's bottom edge with your suction cup, opening a slight gap between the back cover and the frame.
    • If the phone's rear glass is cracked, the suction cup may not stick. Try lifting it with strong tape, or superglue the suction cup in place and allow it to cure so you can proceed.

    • Press a suction cup onto the back cover.

    • Lift the back cover's bottom edge with your suction cup, opening a slight gap between the back cover and the frame.

    • This may require a significant amount of force, but you only need to open a very slight gap with the suction cup to insert your tool. If you have trouble, apply more heat to further soften the adhesive, and try again. The adhesive cools very fast, so you may need to heat it repeatedly.

    • Insert an opening pick in the gap you created and slide it to the bottom right corner.

    • Insert a second opening pick and slide it to the bottom left corner.

    • Insert a third opening pick to prevent the adhesive from resealing during the rest of the removal procedure.

    Edit

  • While inserting only the tip of the opening pick, slide it from the bottom left corner along the side to the top.Slide the pick around the top corner and leave it there to prevent the adhesive from resealing.
    • While inserting only the tip of the opening pick, slide it from the bottom left corner along the side to the top.

    • Slide the pick around the top corner and leave it there to prevent the adhesive from resealing.

    Edit

  • Slide the opening pick from the bottom right corner along the side to the top.Apply more heat if the adhesive becomes hard to cut. During the removal process, the back cover is under tension all the time and is likely to break if the adhesive isn't softened enough.Slide the opening pick around the corner and cut the remaining adhesive at the top of the phone.
    • Slide the opening pick from the bottom right corner along the side to the top.

    • Apply more heat if the adhesive becomes hard to cut. During the removal process, the back cover is under tension all the time and is likely to break if the adhesive isn't softened enough.

    • Slide the opening pick around the corner and cut the remaining adhesive at the top of the phone.

    • Don't open the phone all the way yet. The fragile fingerprint sensor cable still connects the back cover to the motherboard.

    Edit

  • Carefully lift the side of the rear glass where the volume button is located.Use the edge of a spudger to pry up and disconnect the fingerprint sensor flex cable.
    • Carefully lift the side of the rear glass where the volume button is located.

    • Use the edge of a spudger to pry up and disconnect the fingerprint sensor flex cable.

    Edit

  • Remove the rear glass.
    • Remove the rear glass.

    • When reassembling follow this guide to replace the adhesive and reinstall the rear glass.

    • In case you want to replace your rear glass follow this guide to transfer the rear camera bezel including the fingerprint.

    Edit

  • Insert an opening pick under the right side of the plastic cover containing the NFC antenna and charging coil.Twist or pry to release the plastic clips securing the cover.
    • Insert an opening pick under the right side of the plastic cover containing the NFC antenna and charging coil.

    • Twist or pry to release the plastic clips securing the cover.

    Edit

  • Insert an opening pick under the left side of the plastic cover.Twist or pry to release the plastic clips securing the cover.
    • Insert an opening pick under the left side of the plastic cover.

    • Twist or pry to release the plastic clips securing the cover.

    Edit

  • Remove the plastic cover containing the NFC antenna and charging coil.
    • Remove the plastic cover containing the NFC antenna and charging coil.

    Edit

  • Insert an opening pick underneath the top edge of the loudspeaker assembly.Use the opening pick to pry up the loudspeaker assembly.
    • Insert an opening pick underneath the top edge of the loudspeaker assembly.

    • Use the opening pick to pry up the loudspeaker assembly.

    Edit

  • Sours: https://www.ifixit.com/Guide/Samsung+Galaxy+S9+Headphone+Jack+Replacement/136569

    Samsung has brought a lot of improvement in its new-released Galaxy S9. The Bluetooth connection feature will be another attraction despite the “Bixby” and curved “edge screen” features. This feature allows you to connect two sets of Bluetooth headphones on the devices with the help of Bluetooth 5.0 technology; you are required to have more fun while you stay connected with your loved ones, family, friends, or even co-workers.

    Perhaps you’d like to know more about it sooner rather than later. First, you need to make sure that the smartphone, as well as the headset, have enough battery for the excellent experience you’re about to start. The steps below are what you need to walk through.

    1. Activate the Bluetooth on both your Galaxy S9 and Bluetooth adapter
      • Navigate to Settings
      • Find Wireless and Networks
      • Click on the Bluetooth Setting button and switch it on
    2. Ensure the light on your Bluetooth adapter flash once (to achieve this; Press and hold the headphone button for a few seconds and allow headphone to search your mobile phone)
    3. Tap on the headphone set you want to use to set up the connection;
    4. Enter 0000 when prompted to type a password (when the light stops blinking, it means a successful pairing)

    These steps are all you need to do to connect your Galaxy S9 with two headphones consequently.

    Sours: https://www.techjunkie.com/connect-galaxy-s9-bluetooth-headphones/
    1. Harmony harry potter ship
    2. Carpenter and paterson
    3. Cna skills test review

    Earlier this month, CNET predicted that Samsung Galaxy S9 and S9+ looks like to keep the headphone jack. Since the iPhone 8/8+ and iPhone X, Pixel 2 and other big name phones of 2017 had opted to abandon the 3.5mm connector, does Samsung Galaxy S9/S9+ have a headphone jack? With the official announcement and launch event, we have found the answer. Yes, Galaxy S9 line does have a headphone jack in order to keep customers away from additional dongles.

    Samsung-galaxy-s9-headphone-jack

    Is it intelligent for Samsung to keep the headphone jack on Galaxy S9 line? Of course it is. No more complaints about the missing headphone jack and offering users options to use a traditional wired headphones with 3.5mm connector or wireless Bluetooth headphones, no matter which one you will take, there’s no worry about charging your phone while listening to music. The previous ‘old-styled’ headphone jack is not dead yet, instead, it has proved to be extremely useful.

    samsung_galaxy_s8_usb-c_headphone_jack

    We are not saying that the trend to go completely wireless is not good, unquestionably  the future is wireless, no more wire tangle-ups can perfect our digital lives, the point is, if the phone manufacturers can find a way to solve the drawbacks, providing wireless earbuds in the box or lower the price of related accessories is a good solution. Apple definitely goes in an opposite way for ditching the cheap 3.5mm headphone jack and launching the pricey Airpods instead.

    akg-earbuds-samsung-galaxy-s9-headphone-jack

    Like what Samsung said before for introducing the wireless charging technology, wire or wireless? It’s up to you. Similarly, Samsung Galaxy S9/S9+ with headphone jack or iPhone after iPhone 7 without it ? It’s up to you. 

    What about the AKG Earbuds come with the Samsung Galaxy S9/S9+ ? Samsung stereo speakers tuned by AKG, which produces premium headphones, microphones, wireless audio system. The Samsung earbuds comes in the box with Galaxy S8/S8+ and Note 8 are tuned by AKG as well, even though it was rumored to feature wireless AKG earbuds with Samsung Galaxy S9/S9+,  it didn’t come true for multiple reasons, mainly due to the higher cost for it. However, the AKG tuned earbuds do sound really good and comfort in-ear, they are unlike an average headphones come with a flagship phone like most manufactures had done for a long time, I personally really love the music experience with the AKG earbuds on S8 box.

    What if you would rather choose to pair with wireless headphones? I wrapped up some good rated wireless headphones for the new Samsung flagship phone.

    1. TaoTronics Wireless 4.1 Magnetic Earbuds $25.99

    Taotronic-wireless-earbuds

    • Built-in magnets let you attach the two headphones together when not using, and wear like a necklace around your neck, a convenient way to carry around when you don’t need them.
    • The rechargable long battery life means you get 5 hours of continuous music, or can relax with 175 hours of standby time when powered with a 5V external charger.

    2. Mpow 059 Bluetooth Headphones Over Ear $35.89

    mpow-bluetooth-headphones-overear

    1. This item is passive noise isolating, NOT active noise cancellation(ANC), it can’t cancel the noise completely but it won’t drain the battery and damage the sound. As an additional factor of sound quality, it is better than ANC.

    2. The closed-back design provides immersive Hi-Fi sound with CSR chip and 40mm driver together. If you care more about Noise Cancellation than Sound Quality, you may consider other alternatives

     

     

     

    Like this:

    LikeLoading...

    Related

    Sours: https://blog.easyacc.com/2018/02/27/does-samsung-galaxy-s9s9-have-a-headphone-jack/

    How To: The Galaxy S9's 'Adapt Sound' Feature Makes Your AKG Earbuds Sound Even Better

    The Galaxy S9 is an audio powerhouse. It has the first set of stereo speakers on a Samsung flagship, and it even comes standard with a set of AKG-tuned earbuds that would normally cost $99. But if you want to further enhance your audio experience, there's a feature that will customize audio output to your own specific hearing.

    The feature, aptly called Adapt Sound, is hidden deep within the settings menu on your S9 or S9+, but will make a world of difference in audio quality once enabled. As its name implies, Adapt Sound will fine tune your S9's audio and customize it to perfectly match your hearing, which dramatically enhances the perceived quality of any set of headphones.

    Step 1: Find the 'Adapt Sound' Menu

    To start, head to your phone's main Settings menu, then select "Sounds and Vibration." From there, scroll down and tap on "Sound quality and effects" found along the bottom half of the menu.

    The Galaxy S9's 'Adapt Sound' Feature Makes Your AKG Earbuds Sound Even Better
    The Galaxy S9's 'Adapt Sound' Feature Makes Your AKG Earbuds Sound Even Better

    Now, tap on "Adapt Sound" near the bottom of the screen. You'll be asked to grant phone call related permissions, so tap "Allow" on the prompt. Within "Adapt Sound," leave the available age-based sound profiles alone, and tap on "Add Personalized Sound Profile."

    The Galaxy S9's 'Adapt Sound' Feature Makes Your AKG Earbuds Sound Even Better
    The Galaxy S9's 'Adapt Sound' Feature Makes Your AKG Earbuds Sound Even Better
    The Galaxy S9's 'Adapt Sound' Feature Makes Your AKG Earbuds Sound Even Better

    Step 2: Take the Hearing Test

    Now, go to a totally quiet location and plug in your headphones. Tap on the "Start" button on the bottom when you're ready. Adapt Sound will now run a hearing test, which consists of a series of beeps of varying frequencies from the left and right earbuds. It'll ask if you can hear each tone along the way, so take your time and answer honestly in order to create an accurate profile.

    Once the test reaches 100%, you'll now notice a personalized equalizer catered to each ear. Now that you've completed the test, you're free to move on to the final step.

    The Galaxy S9's 'Adapt Sound' Feature Makes Your AKG Earbuds Sound Even Better
    The Galaxy S9's 'Adapt Sound' Feature Makes Your AKG Earbuds Sound Even Better
    The Galaxy S9's 'Adapt Sound' Feature Makes Your AKG Earbuds Sound Even Better

    Step 3: Finalize Your Audio Profile

    After finishing the tests, Adapt Sound will ask for you to choose your preferred ear for phone calls. Once you've made your decision, your custom audio profile will be activated and made available for preview. So tap on "Preview" and check out the difference Adapt Sound makes by toggling between "Personalized" and "Original," along with "Left," "Right," and "Both" ears.

    The Galaxy S9's 'Adapt Sound' Feature Makes Your AKG Earbuds Sound Even Better
    The Galaxy S9's 'Adapt Sound' Feature Makes Your AKG Earbuds Sound Even Better
    The Galaxy S9's 'Adapt Sound' Feature Makes Your AKG Earbuds Sound Even Better

    In addition to this, you have the option of naming your sound profile — simply tap on "Profile name" and enter your desired label when prompted. After that, tap on "Save" in the upper-right corner to save your profile and finish up with setup.

    The Galaxy S9's 'Adapt Sound' Feature Makes Your AKG Earbuds Sound Even Better
    The Galaxy S9's 'Adapt Sound' Feature Makes Your AKG Earbuds Sound Even Better

    With Adapt Sound enabled, we highly recommend playing your favorite song to determine exactly how much of an impact it's made on sound quality. We think it'll make a huge difference on how you hear audio, especially if your hearing isn't great to begin with. As always, leave a comment below and share your thoughts if this setting has made an impact on your audio experience with the S9.

    Don't Miss: Turn Your Galaxy S9 into a Google Pixel

    Keep Your Connection Secure Without a Monthly Bill. Get a lifetime subscription to VPN Unlimited for all your devices with a one-time purchase from the new Gadget Hacks Shop, and watch Hulu or Netflix without regional restrictions, increase security when browsing on public networks, and more.

    Buy Now (80% off) >

    Other worthwhile deals to check out:

    Cover image and screenshots by Amboy Manalo/Gadget Hacks
    Sours: https://android.gadgethacks.com/how-to/galaxy-s9s-adapt-sound-feature-makes-your-akg-earbuds-sound-even-better-0183230/

    For galaxy s9 headphones

    Samsung Galaxy S9 Volume over headphones very low – Solved

    If you use the Samsung Galaxy S9 to listen to music, you may notice that the volume is very low when using Bluetooth headphones or 3.5 mm jack headsets.

    So if the Samsung Galaxy S9 is way too quiet for you, it's because it's designed to protect your ears. This is the Maximum Volume option.

    Fortunately, you can disable it in the settings. This works as follows:

    Samsung Galaxy S9

    Activating developer options

    We have already covered the procedure for activating the developer options on the Samsung Galaxy S9 in detail in this article.

    Enable developer mode on the Samsung Galaxy S9 Please follow the step-by-step instructions in it.

    Disable maximum volume

    This feature can now be found and disabled as follows:

    1. Open Settings

    2. Navigate to "Developer Options" (These must be enabled)

    3. Scroll down until you find the "Disable maximum volume" option

    4. Use the slider to turn this feature off

    Then you can turn the music louder on the Samsung Galaxy S9 and take advantage of the maximum volume. Please keep in mind, however, that this can be harmful to your ears!

    You now know how to deactivate the maximum volume on the Samsung Galaxy S9 and listen to loud music through headphones.


    Sours: https://www.solvemix.com/index.php/en/year-2019/samsung-galaxy-s9-volume-over-headphones-very-low-solved.html
    Samsung Galaxy S8 AKG Earbuds Review - Are They Any Good?

    Samsung officially announced the Galaxy S9 today, and yes, as indicated by previously leaked images, there is a headphone jack. While many companies have opted out of including a headphone jack — the iPhone X, Pixel 2, and Huawei Mate 10 Pro — some, like Samsung, have continued to include the headphone jack and be... just fine.

    Sure, Samsung could have readily ditched the 3.5mm connector, but why? As said before, wireless audio is fine, not great. No one is asking for headphone jacks to be removed, and, “dongles are stupid, especially when they require other dongles,” as we’ve pointed out here at The Verge many times.

    The thing is, headphone jacks work, period, and they’re extremely useful. Should we live without the headphone jack on phones just because we can? That’s probably up to you and your personal ability to put up with #donglelife. But, a lot of Galaxy S9 owners are probably going to enjoy the small delight of popping headphones right in without some sort of adaptor. Like, really enjoy it.

    Sure, the argument can be made that ditching the jack is an anticipation of better gear to come, as parts continue to get more compact in smaller footprints. But really, for the foreseeable future, it doesn’t feel all that necessary to get rid of it altogether. What are we being groomed for when the best wireless option is Bluetooth, which is actually a horrible alternative? (Walled gardens is the answer to this rhetorical question.)

    On top of retaining the headphone jack, the Galaxy S9 also has new speakers that produce surround sound and are 40 percent louder, a new camera system with a mechanically adjustable aperture, and AR Emoji, which is Samsung’s take on Apple’s Animoji.

    In This Stream

    MWC 2018: the biggest news from Mobile World Congress in Barcelona

    View all 33 stories Sours: https://www.theverge.com/circuitbreaker/2018/2/25/17046338/samsung-galaxy-s9-headphone-jack-leak-confirmed

    You will also be interested:

    Learn how to connect to Bluetooth on the Samsung Galaxy S9.

    Pair

    1. From the Home screen, swipe up on an empty spot to open the Apps tray.
    2. Tap Settings > Connections.
    3. Tap the Bluetooth switch to turn on.
    4. Tap Bluetooth. The device scans for and displays the IDs of all available Bluetooth devices in range.
    5. If your mobile device stops scanning before your Bluetooth device is ready, tap SCAN.
    6. Tap the Bluetooth device in the AVAILABLE DEVICES list to pair with your phone.
    7. Follow the instructions to complete the pairing.
    8. If you’re prompted to enter a passcode, try entering 0000 or 1234, the most common passcodes, or consult the documentation that came with the device.
    9. If the pairing is successful, your phone connects to the Bluetooth device.

    Turn on / off

    1. From the Home screen, swipe up on an empty spot to open the Apps tray.
    2. Tap Settings > Connections.
    3. Tap the Bluetooth switch to turn on or off.
    Sours: https://www.t-mobile.com/support/devices/android/samsung-galaxy-s9/bluetooth-samsung-galaxy-s9


    32580 32581 32582 32583 32584