The 60A (Tie Down Engineering/Dexter Marine part number 49947) is a 1 3/4" round painted axle with a 2,000 lbs. capacity. This axle size can commonly be found on light duty utility and landscaping trailers. The black powder coat finish on the beam helps protect the steel from rust and corrosion. The axle includes 2 loose spring seats, axle nuts, washers, and cotter pins upon purchase. The straight spindles can be used with 4 lug and 5 lug idler hubs. On either spindle are pressed stainless steel wear rings for a tight grease seal fit.
- Black powder coat finish
- Includes 2 castellated nuts, 2 washers, and 2 cotter pins
- Non-lube spindles
- Comes with spring seats loose unless otherwise specified (welding is extra)
- Spring seats must be welded to axle beam before installation
- No flanges for brake mounting
- Should not be used with rims exceeding 13"
- Slight camber present in axle beam
- Hubs sold separately
- Capacity: 2,000 lbs.
- Hub Face Measurement: 56"
- Overall Length: 60.5"
- **Spring Center Range: 40" - 46"
- Beam: 1 3/4" Round
- Spindle: 1" Straight
**The spring center range is measured from the center of one spring or spring seat to the center of the opposite spring or spring seat.
- Inner/Outer Bearings (sold separately): 44643 (1" inner dimension)
- Grease Seal Inner Diameter: 1.25"
NOTE: Axles will only be welded within the recommended spring center range provided by the manufacturer. Going inside or outside of this range may cause the strength of the axle to lessen or even a complete axle failure. Welded axles are non-returnable for any reason. When installing the axle, make sure that the camber bow is pointing up. This camber is designed to deflect the weight of the load once weight is applied to the trailer, essentially straightening out the axle to prevent uneven tire tread wear.
Tie Down Engineering/Dexter Marine of Georgia Part Number: 49947
Shorelander 6212803 Black Fishing Boat Trailer Axle Weldment - 56 Inch Width
This listing is for one Shorelander 6212803 Axle Weldment (56" Width).
Please double check to make sure you are ordering the correct axle before you purchase:
Click Here For The Shorelander Parts Lookup Page
Or Contact A Hanna Trailer Supply Service Representative By Phone At (414) 762-7950 For Assistance.
Axles Are Not Returnable And All Axle Sales Are Final.
The Shorelander website also has a video to help explain what you need to know to find the right part for your trailer. The model number, year and VIN number of trailer are necessary. If you need help finding your trailer's VIN number, please watch the video from Shorelander. Shorelander VIN numbers all begin with "1MD" and end with a 6-digit serial number.
This axle is compatible with the following Shoreland'r Part Numbers:
- B1612F-R1612F & B1614F-R1614F-1997
A message directly from Shoreland’r:
Having a problem? Needing technical assistance? Missing Parts?
Don’t contact the store!
Contact our technical service department.
Call:(800) 859-3028 8 AM to 5 PM CST
Here at Hanna Trailer Supply, we are unable to look up parts diagrams for many older Shoreland’r trailers. Shoreland’r has access to much more information on parts and accessories than we have here.
Prop. 65 Warning for California Residents
WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
Conn X Trailer Axle 3500 Pound 56 Inch Hub Face - Super Lube - S3556SL
Conn X Trailer Axle
Trailer Axle; Straight; 3500 Pound Capacity; 56 Inch Length Hub-Face-To-Hub-Face; 2-3/8 Inch Round Tube; Super Lube ® System-No Disassembly Needed; With Castle Nut and Washer
Capacity (LB): 3500 Pound
Hub Face: 56 Inch
Spindle Location: Straight
Tube Size: 2-3/8 Inch
Lubrication: Super Lube
Includes Castle Nuts: Yes
Tube Type: Round
Includes Washers: Yes
- Quick-Connect Straight Axle
- Weight Carrying Capacity Of 3500 Pounds
- Comes With Castle Nut And Washer
- Super-Lube® System Makes Changing Grease Easy And Clean
- Lubrication Requires No Disassembly Of Wheels Or Hubs And Offers Better Protection
- Limited 1 Year Warranty
|Specifications of Conn X Trailer Axle 3500 Pound 56 Inch Hub Face - Super Lube - S3556SL|
|Capacity (LB)||3500 Pound|
|Hub Face||56 Inch|
|Includes Castle Nuts||Yes|
|Tube Size||2-3/8 Inch|
No questions found. Be the first?
Ira looked at the beginning, then we sucked together, and then she just went and sat on my member… I will not describe further - then there was crazy sex, mind-blowing, universal. This was not the case with me. Alas, in the afternoon we parted. I think their names are not real, I did not remember the numbers of their cars - I almost forgot my address then, let alone remember the.
Number of some car.
Trailer axle inch 56
When did you have time. And I didnt see - what a shame. I look down. My beloved Knees with a capital letter. Polished by my eyes - it seems from Nabokov, a great lover of such allusions.Trailer Axle Straightening and/or Wheel Alignment
Take off your raincoat. Maybe you can make tea for both of us. He pointed his thumb to Victoria, diverting her gaze from the cabinet, to the teapot. And teapot in the middle of the mess that reigned in the room. So, let's see, the sixth English size, narrow legs and While Victoria was putting the kettle on the fire, he set to work.
- Kokomo perspective obituaries
- Isagenix black friday sale
- Funny text messages pics
- Sony tv wifi problems
- James 4 9 commentary
- Glencoe mineral identification lab
- Minecraft pe apk
- Harley davidson carry bags
- Fallout 3 fanart
The contraction of the sphincter, in which at that moment there were already three fingers and a loud moan, marked Nastya's orgasm, she, like. The last time, went limp, practically losing consciousness. Deciding that the time had come, I unfolded her and put her cancer near the table, and pulled a prepared condom on the dick, the lubricant on which was.