JACO Threaded Compression Fittings for Home RO Systems
JACO fittings feature a molded ferrule as an integral part of the nut, eliminating the need for a two-piece assembly. These are engineered with plastic grippers best for use with plastic tubing.
JACO compression fittings typically cost less than metal fittings and they offer better resistance to corrosion and chemicals.
Fittings are available in size ranges from 1/8” through 7/8” tube O.D. in all common figurations, such as union, bulkhead, male and female connectors, male branch and male run tees, tee unions and ferrule nuts.
Fittings listed on this page are of nylon material but are available in polypropylene, PVDF, or other materials upon request.Purchase Now »Request A Quote »
Request A Quote »
_ = N (Nylon), P (Polypropylene), & C (Acetal Copolymer) - Call for K (PVDF (Polyvinylidene Fluoride)) Pricing
(N) Nylon has good resistance to organic solvents, oils and gasoline. Good strength
at high temperatures. Cold and hot-water applications. Longtime weathering resistance.
Good impact resistance, both single and repeated. Not recommended for use with
ammonium, boric acid, calcium, sulfuric acid, or hydrochloric acid. F.D.A. listed. Also
(C) Acetal Copolymer, or acetal copolymer, has high tensile strength and good impact resistance
over a broad temperature range. Translucent white color. Not affected by continuous
hot-water service and works smoothly with metal tubing. Acetal Copolymer is not recommended
for continuous exposure to solutions with a chlorine concentration greater than 1 ppm.
Suggested maximum continuous temperature is °F in air and °F in water.
(P) Polypropylene has good chemical resistance. Withstands continuous temperatures
up to °F. Opaque color. Unaffected by most weak acids and alkalies. Below °F it
has good resistance to organic solvents. Do not use with oxidants or strong acids or in continuous sunlight. N.S F. listed. 20% glass filled for improved stiffness.
(K) PVDF (Polyvinylidene Fluoride), a polyvinylidene fluoride, has outstanding chemical resistance for handling
highly corrosive fluids. F.D.A. and N.S.F. Listed.
- Amd smbus driver
- 999 juice wrld
- Dual band handheld transceiver
- 25 june zodiac
- Firebase cli change project
How to Select Materials
JACO tube fittings are manufactured in the following four thermoresins:
(P) Polypropylene: (20% glass filled for improved strength.) Opaque flat white color, (most white of JACO Fittings). Material temperature rating is °F to °F. Polypropylene (PP) is a workhorse in the plastics industry. The general physical properties of polypropylene are similar to those of high-density polyethylene, (PE), but PP has a harder durometer and is more rigid. It is also more resistant to environmental stress cracking than PE. Polypropylene (PP) is light weight and high in chemical resistance. It is unaffected by alkalis (bases), salts and most weak acids, (particularly hydrochloric and phosphoric acids). Below °F it has good resistance to organic solvents. It is not suitable for oxidants, strong acids, chlorinated hydrocarbons, high concentrations of free chlorine, and aromatic compounds (such as benzene and toluene). PP is very inert, thus popular for high purity applications such as deionized water, etc. Avoid use in continuous sunlight. N.S.F. 14 certified, N.S.F. 61 compliant. Tensile Strength of 4, psi increases to 6, psi with glass fill. Durometer = 70D to 80D, (Autoclavable – yes).
(N) Nylon 6: Nylon 6 is an off-white, very light gray colored material (a little whiter than PVDF material, but not as white as Acetal). Because of Nylon’s versatility it is one of the most widely used thermoplastics. Nylon 6 is a tough, strong, abrasion-resistant material with excellent impact resistance, both single and repeated. The material temperature rating is between °F to °F, and it has good strength at high temperatures. Since Nylon naturally absorbs water it is typically not preferred for wet applications. Moisture acts as a plasticizer, reducing tensile strength and stiffness, and increasing elongation. However, as moisture content rises, significant increases occur in impact strength and energy absorbing characteristics. Dry state properties will return as the material dries out. Nylon has good chemical resistance to organic solvents, oils, hydrocarbons, and fuels. Nylon 6 has poor chemical resistance to strong acids and bases. It is not recommended for use with ammonium, boric acid, calcium, sulfuric acid, or hydrochloric acid. N.S.F. Listed. F.D.A. Listed. Tensile Strength = 8,psi, Durometer = 75D to 90D. (Autoclavable – No).
(K) PVDF (Polyvinylidene fluoride): PVDF has a semitranslucent cloudy off-white appearance. It is superior to other fitting thermoplastics in abrasion resistance and chemical resistance for handling highly corrosive fluids. It has remarkable strength over the largest working chemical range. The material is rated at °F to °F and has a working temperature range for fittings of °F to °F. PVDF’s impact strength is over twice that of PVC, and is extremely durable and abrasion resistant under mechanical abuse. It also has outstanding aging resistance, with its properties remaining constant after many years. PVDF also has remarkable fire resistant properties. In the Underwriter’s test PVDF was given the highest classification (V-O), indicating that it was non-flammable and selfextinguishing. PVDF has excellent chemical resistance against strong inorganic and organic acids, aliphatic and aromatic hydrocarbons, and halogenated solvents such as chlorine and bromine. PVDF is not suitable with fuming sulfuric acid, concentrated alkalis, hot bases or bases having a PH > PVDF is FDA compliant, absolutely non-toxic and can be used in repeated contact with food products. N.S.F. Listed. Tensile Strength = 5, psi. Durometer = 75D. (Autoclavable – yes).
(C) Acetal Copolymer: Acetal has a glossy slippery white appearance that may yellow over time. It has high tensile strength and good wear resistance over a broad range of temperatures. The material is rated at °F to °F in open air, and rated for °F in hot water applications. Not affected by continuous hot water service and works smoothly with metal and hard surface tubing.
Note: Acetal copolymer cannot be recommended for continuous exposure to solutions with a chlorine concentration greater than 1 ppm. (Many water treatment facilities use up to 4 ppm of chlorine concentration.) Acetal is unaffected by formaldehyde, oil, alcohols, and most inorganics. However, it is not recommended for use with acids. Good resistance to methylethylketones and has low moisture absorption rate. Listed by U.S.D.A and F.D.A. for use with coffee, milk, and antibiotics. Also N.S.F. Listed. Should not be continuously exposed to sunlight (UV). Tensile Strength = 8,psi, Durometer = 90D to 95D. (Autoclavable – No).
Chemical & Environmental Resistance of Thermoplastics
Note: These chemicals and environmental resistance ratings for thermoplastics are provided for comparison purposes only. No assurance can be implied that any compound will meet the ratings listed. End users should conduct their own evaluation of compounds to ensure satisfactory compatibility with any environmental or physical conditions to which they may be exposed.
No information supplied by JACO Manufacturing Company constitutes a warranty regarding product performance or use. Any information regarding performance or use is only offered as suggestion for investigation of use, based upon JACO or other customer experience. JACO makes no warranties, expressed or implied, concerning the suitability or fitness of any of its products for any particular purpose. It is the responsibility of the customer to determine that the product is safe, lawful and technically suitable for the intended use.
Operating temperatures of JACO Tube Fittings are regulated by ambient and fluid temperatures, type of fluid being carried, tubing type, and conditions of mechanical abuse. Temperatures listed are designated as material ratings only. Testing of complete fitting in customer application is recommended.
There is no nipple, you still have time to pump, a little good. I'm trying to understand her condition, I can't understand her face, but the nipples are erect. Excellent. Today, my slave, I will make you relax and prepare your ass for spanking, but next time, no preparation, do you understand.
Once again, I slap her call on the ass, I see an incomprehensible look saying for what.
Near me fittings jaco
In fact, hospitality is one of the direct features of this people. I have never seen the Kyrgyz wry their noses or try to show that the guests came at the wrong time. You will always be seated at the table, even if there are no frills, at least they will give you tea with a flatbread for sure.
Over the two years that we have not seen, Mirbek has grown noticeably stout.How To Use Quick Connect \u0026 Jaco Style Fittings
The man was in no hurry to leave and helped me in my search. Here, try it on. - with a note of delight he handed me shorts, seemingly even smaller than the previous ones. - Try it, they stretch. The man passed his hands through them and demonstrated, stretching them in different directions.
You will also like:
- 2003 chevy trailblazer coil
- Youtube benny hinn healing
- Sterchi ridge apartment homes
- Romans 5 1 nasb
- Adobe xd portfolio template
- Fitbit ionic user guide
- 4th gen camaro
- Exo variety shows 2017
- Ark single player
- Funny memes pics
- Where to watch pocoyo
Wet. Mo-o-okro. How glad I am that it's wet. I want to reach out and touch the odorous speck spreading over the matter myself.