Evo jl tire carrier

Evo jl tire carrier DEFAULT

You just bought your new Jeep Wrangler, and you want to add larger tires, a sweet lift, and run your favorite trails with all your friends. There is only one problem. Those new tires won’t mount to the stock tire carrier and if they do fit your tailgate now points down when you open it.

How do I carry my spare?

So what are you, as a new Jeep owner, supposed to do? We have looked at the MOPAR factory kit and were left wanting something stronger and less pricey.

Thankfully the aftermarket is full of companies who are there to give us what we desire the most – better parts at better prices.

EVO MFG JL HD Hinged Tire Carrier

The latest trend in tire carrier design is to mimic the factory brackets and mount the carrier as flush to the tailgate as possible. I am a massive fan of this concept. The closer the tire can be carried to the tailgate surface, the more secure the setup is. The EVO MFG carrier is no exception.

The carrier is designed to take the entire load of the tailgate and tire on the hinge assembly. The carrier is made from laser-cut 3/16 and 3/8 inch thick steel with gussets to add rigidity. You can see in the pictures how the carrier is given a three-dimensional look adding style and durability.

Install and Performance

The directions provided by EVO MFG are very detailed and easy to follow. Peeling the dust cover stickers under the interior plastics was the hardest part. Because the tire carrier uses the factory studs for the tire mount, the camera is also carried over without modification.

Using the tailgate is the same as stock. Pull the handle, open the tailgate, and close it again. I have not had any issues opening or closing the tailgate with the extra weight.

It does take some effort and patience to get the whole assembly lined up, so the tailgate closes smoothly. You have to adjust it close to where you think it should be, mount the tire and do it all over again. Like hanging doors on a car, the weight of the tire causes sag that you have to compensate for by adjusting the mounts.

Is it a buy or a bust?

In this case, it’s a buy. Compared to some others that require wiring modifications to accommodate the backup camera the EVO MFG carrier is an easier install. The build quality is excellent, install was simple and straightforward, and it has an effortless, smooth operation. At $762.28, the price isn’t bad either.

The most important factor has to be the lack of rattle and tailgate noise overall. Every once in an awhile you get a thump from a particularly hard hit. The noise only occurs when I hit a seam in the road that causes both rear wheels to skip.

You can pick yours up by going to the EVO MFG website and selecting one of their vendors.

As the Editor, William is responsible for all the good, the bad, the ugly and the indifferent that happens at 4WAAM. William brings a wide range of experience to this role. He also wields a freely shared... More by William Connor

Sours: https://4wheelsandamotor.com/reviews/review-evo-mfg-jl-hd-hinged-tire-carrier/

EVO MFG JL HD HINGED TIRE CARRIER, BARE

EVO-3032

EVO MFG JL HD Hinged Tire Carrier, BARE

The JL factory tire carrier and tailgate was never intended to handle the loads associated with larger, heavier wheel and tire combinations. Many aftermarket tire carriers address this issue, but are complicated to install, require an aftermarket bumper, and add multiple processes to open your tailgate. The EVO MFG JL HD Hinged Tire Carrier is a body mounted tire carrier designed to allow you to carry up to a 37” tire while retaining your vehicle’s one handed easy access to the rear cargo area.  Its design is tough enough to handle the stresses associated with larger tires and simple enough to keep all the functionality your factory tailgate already has in a simple easy to install and operate package.

                 The EVO MFG JL HD Hinged Tire Carrier is engineered for strength and durability. It’s made from 3/16” and 3/8" steel that’s been laser cut, CNC press brake formed, and fully fixture welded. In the factory configuration, the wheel and tire load is transferred through the tailgate to the door hinges. Knowing that this is the weak link, the Tire Carrier is designed to bypass the tailgate and transfer the heavier wheel and tire load directly to the hinges. The hinge brackets are made from the same 3/16 and 3/8" steel and are gusseted for strength with integrated bump stops that stop the weight of tailgate and tire when it’s fully opened. 

                 The EVO MFG JL HD Hinged Tire Carrier’s mounting points are designed to work with your JL by transferring loads to the JL’s body in a location that is reinforced from the factory with multiple layers of strong, stamped, internal, steel gussets.  The simple design keeps a low profile that fits the contours of the vehicle and carries the tire close to the body. Once installed, the tailgate will operate as before, maintaining the factory catch and the easy one handed opening, while the beefy hinge hardware swings smoothly with the added weight of a larger tire.

The tire mounting position is engineered to be adjustable in movement up and down as well as in and out. This ensures your tire will fit properly, won’t rattle, and gives you departure angle and rear window visibility options. The EVO MFG JL HD Hinged Tire Carrier includes an integrated antenna mount.  Install is simple and can be done with a basic tool set by any installer. It’s all bolt-on with no drilling or cutting needed.

Compatible with Factory Rear Reverse Camera and 3rd brakelight

 

INSTALLATION TIME 2-3 HOURS

EVO MFG JL HD HINGED TIRE CARRIER, BARE
Click to enlarge
Sours: http://evomfg.com/
  1. 2014 e class
  2. El camino classic cars
  3. Antique trunk hardware parts

EVO MFG JL HD HINGED TIRE CARRIER, BLACK

EVO-3032B

EVO MFG JL HD Hinged Tire Carrier, BLACK


The JL factory tire carrier and tailgate was never intended to handle the loads associated with larger, heavier wheel and tire combinations. Many aftermarket tire carriers address this issue, but are complicated to install, require an aftermarket bumper, and add multiple processes to open your tailgate. The EVO MFG JL HD Hinged Tire Carrier is a body mounted tire carrier designed to allow you to carry up to a 37” tire while retaining your vehicle’s one handed easy access to the rear cargo area.  Its design is tough enough to handle the stresses associated with larger tires and simple enough to keep all the functionality your factory tailgate already has in a simple easy to install and operate package.

                 The EVO MFG JL HD Hinged Tire Carrier is engineered for strength and durability. It’s made from 3/16” and 3/8" steel that’s been laser cut, CNC press brake formed, and fully fixture welded. In the factory configuration, the wheel and tire load is transferred through the tailgate to the door hinges. Knowing that this is the weak link, the Tire Carrier is designed to bypass the tailgate and transfer the heavier wheel and tire load directly to the hinges. The hinge brackets are made from the same 3/16 and 3/8" steel and are gusseted for strength with integrated bump stops that stop the weight of tailgate and tire when it’s fully opened. 

                 The EVO MFG JL HD Hinged Tire Carrier’s mounting points are designed to work with your JL by transferring loads to the JL’s body in a location that is reinforced from the factory with multiple layers of strong, stamped, internal, steel gussets.  The simple design keeps a low profile that fits the contours of the vehicle and carries the tire close to the body. Once installed, the tailgate will operate as before, maintaining the factory catch and the easy one handed opening, while the beefy hinge hardware swings smoothly with the added weight of a larger tire.

The tire mounting position is engineered to be adjustable in movement up and down as well as in and out. This ensures your tire will fit properly, won’t rattle, and gives you departure angle and rear window visibility options. The EVO MFG JL HD Hinged Tire Carrier includes an integrated antenna mount.  Install is simple and can be done with a basic tool set by any installer. It’s all bolt-on with no drilling or cutting needed.

Powdercoated bumpers/tire carriers are offered as a convenience. We do not cover finish/powdercoating under warranty. All our bumper/tire Carrier products are available in raw metal for local treatment specific to your area needs. 

Compatible with Factory Rear Reverse Camera and 3rd brakelight

INSTALLATION TIME 2-3 HOURS

 

EVO MFG JL HD HINGED TIRE CARRIER, BLACK
Click to enlarge
Sours: http://evomfg.com/

When he let go of her, the falmerka caught her breath, and rather rumbling clung to the orc, trying to hug him with her long thin arms. Sharg, feeling a. Mixture of confusion and gratitude for this incomprehensible creature, hugged her with one hand.

Tire evo carrier jl

Twenty. - I replied. Now, already an adult, you don't have to ask your mother's permission, - the girls snapped at me, - well, are you. Going to us.

How to - GenRight JL Tire Carrier Install

I saw how the mouth was filled with sperm. A new wave of excitement went over the body, I already gave a start. Yulka took a big swallow and swallowed all the sperm in her mouth at once. She started with her tongue to collect the remains of sperm, sucked in what remained in the navel. Now I tilted Yulka's head in a few portions and passed me some sperm.

You will also be interested:

I came up from behind and hugged her shoulders. Natasha tensed like a spring. I felt her ragged breathing, my kiss took her out. I didn't know that she is still, still a virgin. This thought worried me least of all.



712 713 714 715 716