Comcast ip address

Comcast ip address DEFAULT

10.0.0.0.1 IP Address – How to Login into Comcast Xfinity Router With It!

10.0.0.1 is known as the default gateway IP address for the admin settings of the Xfinity router. Much like multiple other IP addresses like 192.168.0.1, 192.168.1.1, 10.0.0.0.1, 10.0.0.1 is included in private Class A IP address range, appreciated by the IETF and IANA.

10.0.0.01

But if you are just new to the technical world, the good chances are that you have everything you need to know about the IP address here. And, here’s the process to log into a router with the 10.0.0.1 address.

How to log into a router with 10.0.0.1 IP

Similar to other IP addresses, with 10.0.0.1, the login process is not hard-solving at all. Just make sure that you will strictly follow the steps that we mention below.

Discover everything about the 10.0.0.1 login

Administrators can usually log in to any router at this IP address just by accessing it like what they do with any other URL. The default login of the 10.0.10.1 IP address is quite similar to that of the Comcast Router.

So, if you are seeking for the way to log in a router with 10.0.0.1, you’ve come to the right place. Here’re the steps:

  • Connect the cable of the router to your computer. Use the wireless network instead if you want.
  • Make sure that you connect the device you work to the Wi-Fi. To avoid failures like being logged off when clicking the Save button, utilize a wired connection instead to save your changes effectively.
  • Open the web browser, then type “https://10.0.0.1/” in the address bar to visit the gateway. It is considered the gateway login address for Comcast Router.

Don’t mistype it if you don’t want to turn your experience into the worst one ever. If 10.0.0.1 doesn’t work, enter 192.162.1.1 or 192.168.100.1 or 192.162.1.1 as its alternative.

If you have difficulty dealing with the address failure, verify the Comcast Router manual first. The correct address is the IP listed as ‘Default Gateway’ with its default username and password.

  • Now, enter the default information (username and password) of the Xfinity router to log into the admin panel. Then, go to your wireless router settings to allow the user to configure changes.
  • Go to the available network tab to configure changes like SSID and Security settings and Dial-Up connection/DSL method.
  • Enter the IP address default username and password to make changes and set up the DNS. The DNS, by default given by Google, is often 8.8.8.8 or 8.8.4.4.

If you have more free time, it’s worth your investment to see through a list of default IP addresses so that it is easier to choose the suitable one for multiple different routers and modems.

10.0.0.1 default password and username

At the very first time shipped out, a router usually comes with a combo of its built-in password and username. This information is necessary for the users to access the software and make changes to their network settings.

Try the login credentials below since it is important. These steps include:

  • The default admin values include: Root -> User -> Admin
  • The default password values are: Motorola/High-speed/Password/W2402

If none of the usernames and password works, use the search bar, then type your router’s name in to view the default username and password for the login process.

Some username/password combinations for the network hardware using 10.0.0.1 are:

  • admin/password
  • [none]/public
  • [none]/[none]
  • Cisco/Cisco
  • admin/admin
  • cusadmin/highspeed

In case the default password of the router doesn’t work, reset the router back to its factory defaults so that you can restore the default username and password. Once you’ve got it, simply log in the default information to the 10.0.0.1 router.

Things you must know about the 10.0.0.1 address

People usually use the 10.0.0.1 IP address on a client device or assign it to network hardware as a default IP address. Commonly, this IP address is seen in business computer networks while other addresses like the 192.168.x.x series are normally used in home networks.

Some of the at-home devices are still assigned the 10.0.0.1 IP address, and it still works well as others. Wanting to know more about the ways to use the 10.0.0.1 IP address? Keep reading on!

If your client device works with its IP address in the 10.0.0.x range, for example, 10.0.0.2, the router is surely using an IP address in that range like 10.0.0.1. This IP address is currently used as the IP address of some Infinity and Cisco brand routers supplied by Comcast.

The differences between a public and private network

There are more to talk about public and private network. While a public network can be easily connected from any location worldwide via the Internet, the private one uses restrictions to give access to the selected network systems.

Thus, most enterprises or organizations use a private network to restrict any unexpected disturbance from outside systems. Then, their information will be more secure without elevating the security of their network through public networks.

So, as you can see, private networks make things done easily instead. That’s why they are commonly favored by the whole population worldwide.

Which devices that the IP Address 10.0.0.1 will be assigned

The 10.0.0.1 IP address is generally assigned to the routers which get all the other network devices connected to. Yeah. You’re thinking right. These devices can be connected/assigned to other addresses onwards.

Any computer can assign the IP address 10.0.0.1 if the private network supports this address range. Client computers which use the 10.0.0.1 address obviously won’t give users better performance or improve their security as that of other private addresses.

Our advice is to utilize the ping utility to know if any device on your local network is currently using 10.0.0.1 or not. A router’s console will often display a long list of IP addresses recently assigned through DHCP. So, check it out and define some, which are offline, belong to the device.

The fact is that 10.0.0.1, as a private IPv4 network address, can’t directly communicate with any device but the network like websites. But, when being used behind a router, the IP address works perfectly.

Especially, it can perform well as on other common IP addresses for desktops, tablets, phones, printers, and other existing devices within a home or business network.

Advantages that 10.0.0.1 IP can bring to us

Anything that exists is born to provide us benefits, and this IP address is not an exception. The IP address 10.0.0.1 remains unique on the personal network while public IP addresses are always different in the world of websites and IP addresses.

How can 10.0.0.1 help us?

To talk about the benefits of the 10.0.0.1 IP address brings to the users, it will take time. But we will make it shorter and easier for you here. To make it clear about the good side of using 10.0.0.1, let us tell you:

The ability to make changes

Once you use this IP address, you can easily change or modify the administration settings of any admin panel. Or, in other words, using this private address gives the users complete control over a private network.

Every time you purchase a brand new router, you want to control or change the network setting. And, when 10.0.0.1 IP comes, it provides us the direct access to the default settings of the router.

As a default IP address of all the private networks, people can easily change its setting and set a new default IP address if needed. Though these changes can lead to complication in a network like the setting reset in a router, 10.0.0.1 makes thing more secure.

Ease of assignment

Thanks to this IP address, the users get an easier way to assign multiple IP addresses to popular devices such as smartphones, printers, FAX machines, computers, etc. This process is done on the public network as these devices obtain all successive IP addresses.

And, using this IP address is more convenient while you are setting up a brand new network. The truth is that a router can tend to reset its default settings multiple times a day.

Convenience

Configuring the other IP addresses is now much easier since, with 10.0.0.1, it just comes with a simpler numbering system. For other default IP addresses like 192.168.1.1, you may get confused between the two addresses in the range.

The 10.0.0.1 IP address has more and larger space for sub-netting since it comes with endless assignable IP addresses. Just choose one out of 16,777,216 IP addresses to set the default IP address of the private network to 10.0.0.1 IP.

Common configurations when using 10.0.0.1 IP

There are certain configurations you can do with the 10.0.0.1 IP address. And, in this part, we would like to introduce some of them and the basic steps to make it perfect. These configurations are listed below:

  • DNS & Proxy settings
  • A secure password setting or the encryption type change
  • The management of the common network types WAN, LAN, WAN, WLAN, etc.

Common issues with the 10.0.0.1 IP address

issue 10.0.0.1

A coin has two sides, so does 10.0.0.1. That’s why you are reading about the common issues when using the IP address which administrators may encounter. There are a lot of problems to know here:

1. No connection to the 10.0.0.1 on my Xfinity Router

A lot of users complain that they can’t connect to the 10.0.0.1. There are many reasons for causing this situation to happen. But, the most common one maybe there is no device existing which uses the 10.0.0.1 IP address as its default gateway.

To fix it, you need to use CMD command prompt on Windows and check if any device working in your network is using 10.0.0.1. You may use the ping command for MAC or in terminal.

To get the expected result, it is a must to find a device actively working in your local network to get the ping easily. Also, remember that it is impossible to connect to any 10.0.0.1 device that works outside your private network.

That means you can’t even log in or ping to a 10.0.0.1 device if it doesn’t exist inside a local network that you’re currently using to access it.

2. Unresponsive Comcast default gateway IP 10.0.0.1

This may happen when there are some issues with the router hardware or a loose wire. Those issues are related to frequent power failures and prolonged usage. Sounds serious, right? Don’t worry since we’re here for you!

To fix it, reboot your system, hardware, and check if there are any loose connections or not. If, unluckily, nothing works, call your router’s manufacturer ASAP.

And, it seems like we can’t forget to mention this issue. The device which is correctly assigned to the 10.0.0.1 IP address might stop working suddenly. The reason is technical failures with your network or on the device.

3. Login problems

There are some problems that will occur in the login process. And, to make it much easier for you, we’ve listed all of them and their solutions here. Follow the list below to know more about the common login problems!

Router login failure

If you can’t log in into the Xfinity router, you may probably be entering the wrong password or username. First, make sure that you’ve remembered the right ones as well as the correct IP address.

If you can’t remember the login password, try to reset the router login. At the back of your router, you may need to press and then, hold the black color button for about 10 seconds. This will help reset your router to its default settings

Difficulty in loading the router login page

“The router login page not loading”. Yeah, you may see this sentence a hundred times. If this situation happens, check out if your device is connected to the Wi-Fi or not.

Also, find if the wrong Comcast router IP address which is not assigned as the default one. These ways will be the best to find the solution via Command prompt.

Incorrect client address assignment

You’ve already set DHCP and the 10.0.0.1 IP address up on the network, right? Then, it is needed to find if there is any device using the 10.0.0.1 IP address as its static IP address.

If the IP address is already taken, clients may rely on the address. On any router, you can enter this IP address in one of the common admin console pages. Meanwhile, for business routers, they might use command line scripts and configuration files.

Mistyping or entering this address in the unsuitable place, the device may not be available on the 10.0.0.1 IP. And, even when two devices are assigned to the same IP address, the IP address conflict may cause unexpected network-wide issues for such devices.

The issue arises since the Comcast is using a single line divided into 20 different areas. Then, when Comcast helps nothing, what can we do? The best way to solve the problem is to:

  • Disable your Wi-fi connection on your device.
  • With a strong ethernet cable, directly connect your device (PC/laptop) to it.
  • Enter the default IP address of the router. Please note that you can’t find it when using ipconfig command in MAC/windows. So, consider the way and device to type it in.
  • Now, change the default IP address. It’s best to avoid any IP address conflict. For instance, if it was 10.0.0.1 earlier, change it to 10.0.0.2

4. Can’t access the Xfinity router settings

To access Xfinity settings, it is important to define the default IP address. The address can’t differ depending on the Comcast Xfinity router model.

Commonly, it can be https://10.0.0.1 or https://192.168.100.1 https://192.168.1.1. And, some also can’t remember the admin password for Xfinity router. Yes, simply, it is just “password”.

5. Don’t know the password for the Xfinity WiFi

Well! It is quite easy to find the default password for the Xfinity Wifi. We have two ways to choose from, and they are simple to follow. You can discover it on the box of the router. If it doesn’t match. Do the 30-30-30 reset and use the default password instead.

Now, it’s time to give our information a closing end!

10.0.0.1 is such a must to assign to a router for the best user experience while using any device. We also think that you’ve got enough after reading our article about the login process with this IP address.

And you are clear about everything you need to know about the IP address like its advantages, configurations, etc. Though it may be quite regretful to stop here, we will be back soon, our dear readers.

Don’t forget to visit our site daily to update great news!

Sours: https://192-168-i-i.com/10-0-0-0-1/

Xfinity Router IP and Login Instructions

Step 3: How to login to your Xfinity router

Now when you have the router's IP address and also the credentials needed, it will be a piece of cake to login to your Xfinity router.

1. Open your browser and navigate to the IP you figured out in Step 1

In the url field simply enter the IP address that you figured out.

Sometimes the browser can misinterpret the IP address and tries to search for it instead, to fix this you should add in front of the IP before hitting enter.

2. Enter the username and password for your router

This is as easy as it sounds, simply enter the username and password for your router, and click login. If all goes well you will now be logged in to your Xfinity router and can make the modifications you want.

Sours: http://whatsmyrouterip.com/xfinity-router-ip-and-login-instructions
  1. Sig sauer cable lock
  2. Curved line png
  3. Grey velvet curtain panels
  4. Hp omen wallpaper

Xfinity was able to set its line of routers in recent years. If you’re one of those who considered this aesthetically designed brand of routers, we’ve got helpful stuff in store for you. Here’s a quick guide to your Xfinity router login and how you can get to the admin interface to configuration information like your SSID or current password and log in. 

XfinityRouterLogin

We’ll help you configure your router in seconds for your security. We’ll save you from the panic with our troubleshooting guide below. Make sure to log in to your router’s web interface with the steps below as soon as you plug in your router. If you have a different router, you can check login details in our Router Login List.

Contents

About Comcast Xfinity

Comcast Xfinity is one of the biggest internet service providers in the US. Along with their internet packages, they also rent out their routers. These routers can be rented when you don’t have a stand-alone router.

Other brands of routers are allowed to be used by consumers. Other top brands in this category are Netgear, Motorola Arris, and Xfinity routers themselves. Xfinity Wireless Gateway 3 is the router that you’ll get when you avail of an internet plan.

How to Xfinity Router Login

Time needed: 5 minutes.

Here are the simple steps on how to log in to your Xfinity router.

  1. Connect your device to your router.

    Use a wired connection when you are using a laptop to have a secure connection.

  2. Open any browsers available on your device and enter your router’s IP address.

    Your IP address is at the bottom of your router. You may also key in 10.0.0.1.

    NOTE: If that IP address doesn’t load your Xfinity router’s web interface, then you may follow these steps.

  3. Enter ‘admin’ for the username and ‘password’ for the admin password on the login page.

    If you already personalized your router login, then you may log in accordingly.

  4. Click login, and you should see the router’s web admin homepage.

    If you were not able to log in successfully, try to log in again. If your second try is also unsuccessful, there’s a chance that your router is hacked.

Like other wired or wireless routers, you can access Xfinity router admin using 192.168.1.1 or access it using 192.168.0.1. From there, you can access the smart setup wizard or other router configuration details related to your router and internet connection. 

Default Xfinity Router Login for WiFi Device

A consumer usually receives a router in factory default settings. The default Xfinity router login is ‘admin‘ for the default username and ‘password‘ for the password.

Reminder: Make sure to change these default Xfinity RouterLogin credentials before anyone else changes them for you. It’s the only key to revealing all your information online, including your bank details and identification.

Different router brands have additional default login credentials. Make sure to read our guides on Cisco, Verizon, Frontier, and AT&T.

How to Configure the Router

To prevent you from getting into horrible identity thefts and hacking, here’s how to change your router login credentials:

  1. Connect your device to your router. It is recommended that you use a wired connection while doing the router configuration. So check your ethernet cable.
  2. When connected, login to your router’s web interface on any browsers using the default or your personal login credentials. If you can’t log in successfully, try the default router login settings.
  3. On your router’s web homepage, click Wizard. This will land you on the router admin password change panel.
  4. You may now change your admin password by entering the old and the new password. Make sure to make a strong password.

How to Reset Credentials

Some circumstances will lead you to reset your router altogether. These reasons include:

  • Forgotten router admin login credentials
  • Hacked router login credentials
  • Router error (Error 2123)

You need not worry since you can efficiently address these problems. Here’s how to reset your Xfinity router:

  1. Look for the tiny little button at the back of your router.
  2. Look for a long and thin object to press. You may use the tip of the paper clip or hairpin.
  3. Press the button for 15-20 seconds. The Led lights will blink in the process.

Reset Pre-requisite: Power Cycling

Power cycling is a method where electrical devices are turned off or plugged out. This helps the device’s RAM or internal memory refreshed when having too much data or occasionally overheat.

Here are some of the benefits that power cycling can do to your Xfinity router:

  1. Power cycling or reboot can help your router be back in its optimal condition.
  2. When you notice you have a slow to no internet connection, try to turn it off for a few seconds. Then turn it back on again; this process will enable the router to refresh its built-in RAM and re-transmit data once plugged in.
  3. A power cycle a week can prolong the life of your router. You should give it a rest just like any other machine; it gets ‘tired’ too.

You can also perform power resets on other router brands too. Read up on guides for TP-Link, Belkin, ASUS, Spectrum, and ARRIS.

F.A.Qs

What is the default Xfinity router login?

A consumer usually receives a router in factory default settings. The default Xfinity router login is ‘admin‘ for the default username and ‘password‘ for the default password.

How do I reset my Xfinity router login?

1. Look for the tiny little button at the back of your router.
2. Look for a long and thin object to press. You may use the tip of the paper clip or hairpin.
3. Press the button for 15-20 seconds. The Led lights will blink in the process.

What is a Comcast Xfinity router?

Comcast is one of the biggest internet service providers in the US. Along with their internet packages, they also rent out their routers. These routers can be rented when you don’t have a stand-alone router.

Conclusion

Hopefully, this article helps you to configure your Xfinity router. If you are having trouble getting it done, then long-press the reset button and strat configuration all over again. Using the router default login details. You can also check the login details of other routers in our Router Login List. if you have any queries then do leave a comment below.

Categories RouterSours: https://routerloginlist.com/xfinity-router-login/

How To Log Into A Comcast Xfinity Router Modem

So you probably here because you want to know how to log into your Comcast Xfinity Router.

You're wondering how to proceed with setting it up without having to squint at the long numeric sequences and rather techie terms written in the tiniest font in the instruction manual included with your router.

XFINITY Login - Quick Fix

1. Open up a browser and type (minus quotes): "http://192.168.1.1", "http://192.168.100.1" or "http://10.0.0.1". Don't know the IP Address? Check out how to get the router IP address further below.

2. Enter Username & Password. Don't know the Username/Password? Check out how to get these details below.

You probably want an explanation  – in Layman’s terms. Well then, this article is for you!

Why Log in to your Comcast Xfinity Router?

Probably one of the burning questions you have right now is: “I thought this thing was plug and play! Why do I have to log into my Comcast Xfinity router?”

There are actually a number of reasons—from doing basic tweaks on your wireless network, simple security reasons (the most basic being the changing of your password for your WiFi connection, for example), and updating your firmware to the latest version.

These are simple enough to do yourself, and will only take a few minutes as compared to going through the hassle of calling technical support (insert telephone hold music here) and waiting until they send a service personnel to come over and do it for you.

But before anything else, let’s log into that router first!

What is the Xfinity Default Router IP Address?

The default router IP Address for the Xfinity Router—or any router, for that matter—is usually "192.168.1.1", “192.168.100.1” or “10.1.10.1”. If that doesn’t work, check out the box your router came in with or on the router itself—the router’s IP address is usually printed on a sticker, along with the username and password.

If you’re not that lucky, then crack open that manual and look for it in the appropriate section.

Still don’t want to crack open that manual? All right, all right, here’s an alternate solution for you:

Get The XFINITY IP Address

1. Press the windows button on your keyboard and “R” at the same time.

2. Type “cmd”, without quotes, and then press the Enter key to open the Command Prompt window.

3. Next, type “ipconfig” and press the Enter key.

4. Locate “Default Gateway” from the bunch of adapter information that popped up on the window.

5. The IP address beside "Default Gateway" is the address of your router.

Is There A Default Login For Comcast Routers?

Most routers use default login credentials. The most usual username/password combination would be “admin” for your username, and “password” for the password.

Other possible combinations would be “root” and “root”, or “cusadmin” and “highspeed”. If that doesn’t work, and it’s not on the box or the router, well, you just have to check the manual. And no, no alternate solutions this time. Sorry.

Log In To Your Comcast Xfinity Router - Or Reset?

At this point, you probably have your log in details.

However, sometimes routers have been used by previous customers, so the default credentials have been changed. In this case, a router reset might be needed so that you can log into it using the default gateway and log in details.

How To Reset The Comcast XFINITY

1. Get a bent paper clip or something with a thin, pointy tip, then press it into the recessed reset button located in your router for about 30-40 seconds.

2. Wait until the lights blink off and turn back on again, then release.

Then try the login steps again.

You could also try the 30 30 30 hard reset 

If it still doesn’t work, then it’s time to contact your customer service.I hope this article has been of some help to you into logging on to your Comcast Xfinity router.

If you like this article, or have any suggestions or comments, please feel free to share your thoughts in the comments section below. Go ahead and share this article too. You never know how many people you might be preventing from getting a headache.

Sours: https://bestwirelessroutersnow.com/log-comcast-xfinity-router-modem/

Address comcast ip

Xfinity (Comcast) Default IP Address List
Instructions to find your Xfinity router's IP address


Info updated Sept. 24, 2021

Most Xfinity routers have a default IP address of 10.0.0.1.

Pro tip: If you're already connected to the router's network you can use this tool to instantly see your Xfinity router's ip address

The IP address is required when accessing the Xfinity router's web interface to configure it.
Since some of the models don't follow the standards, you'll have to check in the table below if the common default doesn't work.

You can also check the instructions on how to figure out your Xfinity router ip if you are connected to the router's network.

Our readers have reported that their Xfinity router's have had the following IPs
(more common higher in list)

  • 10.0.0.1
  • 192.168.1.1
  • 192.168.0.1

To access the web interface you'll also probably need a username and password, if you find your model in the list there's a link to the default settings for that model. Most Xfinity routers use the same default usernames and passwords so you can also check the Default Xfinity password list to try with that one.


Instructions and common questions

How to find out your Xfinity router gateway IP

In case you have changed your Xfinity router's default IP address and can't remember it you can find it out quite easily by following the instructions below.
(This also works when the router gets it's IP address assigned by DHCP.)

Find Xfinity router ip on Windows

  1. Press +
    A run prompt should open
  2. Type into the input and press enter
    A command prompt will open
  3. Type the following into the command prompt: and click enter.
  4. Your Default gateway, probably something like 192.168.0.1, will show

Find Xfinity router ip on Linux

  1. Open a terminal window (Shortcut on some distros: ++)
  2. Type the following: and press enter.
  3. You will be presented with your Xfinity router's IP address

Find Xfinity router ip on OSX

  1. Open the OSX Terminal: Finder > Applications > Utilities > Terminal
    Or you can press and type terminal
  2. Type the following command: and press enter.
  3. Your Xfinity router default IP will be shown, something like 192.168.0.1
Sours: https://www.router-reset.com/default-ip-address-list/Xfinity
Comcast Modem Change IP Address \

10.0.0.1 | Comcast Xfinity Router / Wi-Fi Network Login

10.0.0.1 is an Xfinity router IP under the private Class A IP address range, as per the IETF and IANA’s ruling. 10.0.0.1 is the default gateway address for Xfinity router admin settings. 

Apart from 10.0.0.1, there are multiple IP addresses like 192.168.1.1, 192.168.0.1, 10.0.0.0.1, and 10.1.10.1 that routers use as their default gateway.


How to Login into Comcast Xfinity Router?

  1. Open the browser and visit Xfinity gateway IP: https://10.0.0.1/.
  2. In the Login Screen, Enter the default username and password for your router.
  3. Go to the wireless router settings, which allow you to configure changes.
  4. Go to the Network tab and configure changes like the Dial-Up connection/DSL method, SSID, and Security settings.
  5. Enter the default username and password to change and set up the DNS. (By default, the DNS is 8.8.8.8 and 8.8.4.4 given by Google)

Default Username and Password of Routers

Router NameDefault IP AddressDefault UserNameDefault Password
3Com192.168.1.1n/aadmin
3Comadminttdadminttd
3Comadminn/a
3Comn/a
PASSWORD
3Comroot!root
ACCnetmannetman
ACCTON192.168.2.1n/a0
Aceex192.168.8.1adminn/a
Aceex10.0.0.2adminepicrouter
Actiontecn/an/a
ADC Kentroxn/asecret
Adtrann/an/a
AirLink+192.168.1.1adminadmin
Aiway0n/a
Allied Telesynrootn/a
Allied TelesynManagerFriend
Allnetadminadmin
Ambit192.168.100.1useruser
Ambit192.168.100.1adminpassword
Ambitrootn/a
Amitechadminadmin
Apple10.0.1.1n/an/a
Arescomn/aatc123
Arescom192.168.1.1dsladminn/a
Ascendadminascend
Ascendn/aascend
Ascom
Asmackadminepicrouter
ASUS192.168.1.1adminadmin
Avayarootroot
Bausch Datacom10.0.0.2adminepicrouter
Bay NetworksUsern/a
Bay NetworksManagern/a
Bay NetworksManagerManager
Belkin192.168.2.1n/an/a
Belkinadminn/a
BenqAdminadmin
Bintecadminbintec
Bosonn/an/a
Broadlogicadminadmin
Broadlogicinstallerinstaller
Broadlogicwebadminwebadmin
Buffalo192.168.11.1rootn/a
Cable & WirelessAdmin1234
Cabletronnetmann/a
Cabletronn/a
n/a
CanyonAdministratoradmin
Canyon192.168.62.1admin1234
CaymanAnyn/a
Ciscociscocisco
Ciscon/asan-fran
Conexantn/aadmin
Conexantn/aepicrouter
Dell192.168.1.1adminadmin
Digicorpn/aBRIDGE
Digicorpn/apassword
D-Link192.168.0.1192.168.0.30192.168.0.50n/an/a
D-Link192.168.0.1 or192.168.1.1AdminAdmin
D-Linkn/aadmin
D-Linkadminn/a
D-Linkusern/a
D-Linkn/a1234
D-Linkn/ayear2000
E-Conadminepicrouter
Edimaxadmin1234
Efficientloginadmin
Efficientadminadmin
Efficient Networksn/ahs7mwxkk
Elsan/acisco
Ericsson (Formerly ACC)netmannetman
E-Techn/aadmin
E-Tech10.0.0.2adminepicrouter
Flowpoint192.168.254.254n/aadmin
Flowpointn/apassword
Fujitsu Siemensn/aconnect
Gatewayadminadmin
IBMn/aascend
Infosmartadmin0000
Inteladminhello
IntelNICONEXNICONEX
Inteln/ababbit
Ipstaradminoperator
JAHT10.0.0.2Adminepicrouter
LinksysAdministratoradmin
Linksys192.168.0.1192.168.1.1192.168.1.225
192.168.1.226

192.168.1.245

192.168.1.246
n/aadmin
Linksys192.168.1.1192.168.1.251adminadmin
Livingston!rootn/a
MacSenseadminadmin
Medionn/amedion
Microsoft Broadband Networking Routers also known as “Base Station” routers192.168.2.1adminadmin
Microsoft Broadband Networking Routers also known as “Base Station” routersn/aadmin
Mikrotikadminn/a
Motorolacablecomrouter
Motorolaadminmotorola
Motorolaadminpassword
Netgear192.168.0.1adminpassword
Netgear192.168.0.227adminpassword
Netgearn/a1234
NetgearAdmin1234
Olitecadminadmin
Olitecadminadslolitec
Pentagramadminpassword
Pentagramn/apento
Pirelliadminmu
Pirelliadminmicrobusiness
Pirelliuserpassword
Siemenssuperuseradmin
Sitecom192.168.0.254adminadmin
Sitecom192.168.0.1n/asitecom
SmartSwitchadminn/a
SMC192.168.2.1n/a
n/a
SMCadminadmin
SMC192.168.2.25adminsmcadmin
SMCn/asmcadmin
SMCadminbarricade
SMCcusadminhighspeed
SMCn/a0000
SMC192.168.2.1n/an/a
Speed Touch (Alcatel)10.0.0.138Administratorn/a
Speedstreamadminadmin
T-ComfortAdministratorn/a
Teledatadmin1234
Telekom MalaysiaZXDSLZXDSL
Telekom MalaysiaADSLexpert03
Teletronics192.168.1.1admin1234
Telnet192.168.1.1n/an/a
UNEXn/apassword
US Robotic192.168.123.254adminadmin
US Roboticadminn/a
US Roboticroot12345
US Roboticn/a12345
Westelladminsysadmin
X-Microsupersuper
X-Micro15021502
Xyplexn/aaccess
Xyplexn/asystem
Yakumoadminadmin
Zyxeladminadmin
Zyxel192.168.1.1admin1234
Zyxeln/a1234
Zyxeln/an/a

For routers with 10.0.0.2 as the default gateway, follow this link to know your router’s 10.0.0.2 login username and password.


FAQs and Common Issues

Here is a quick fix to the common issues which Administrators encounter:

1. 10.0.0.1 refused to connect On my Xfinity Router

Users unable to connect to the 10.0.0.1 could be because no device uses 10.0.0.1 as the default gateway. Use command prompt CMD on Windows and see if any device in your network uses 10.0.0.1. You should be using the ping command.

For MAC users, you may use the ping command in the terminal. There should be a device active in your local network to get the ping to get a definite result.

2. Comcast Default Gateway IP “10.0.0.1” took too long to respond

This tends to happen due to a loose wire or some issue with your router hardware. Such can occur due to prolonged usage and frequent power failures. 

Try rebooting your hardware, your system, and try checking for any loose connections. If nothing works, contact your router’s manufacturer.

3. “I am trying to login to my admin panel for Xfinity. It shows the wrong SSID and logs me into someone else’s network. Comcast can’t help. What do I do?”

The issue arises due to Comcast using a single line split into 20 different areas. The best way to solve this is to:

  1. Disable the Wi-Fi on your device.
  2. Connect your PC/laptop directly with an ethernet cable.
  3. Type the router’s default IP address (which can be located by using the IP Config command in Windows/MAC)
  4. Now change the IP address. Ex: Your router may be involved in an IP address conflict, so better change it. If it was 10.0.0.1 earlier, now switch to 10.0.0.2

4. How do I access my Xfinity router settings?

You need the default IP address to access your Xfinity Settings. Depending upon your Comcast Xfinity router model, the default IP address can be https://10.0.0.1 or https://192.168.1.1 or https://192.168.100.1.

5. What is the default admin password for Xfinity router?

The default admin password for the Xfinity router is password.

6. How do I find my password for my Xfinity WiFi?

To find the default password, you can either see the box of a router or else if the password doesn’t match, do a 30-30-30 reset and then use the default password.

Once you’ve exhausted all these options, let us know in the comments how practical these tips are when it comes to addressing your home networking needs.

Sours: https://10-0-0-0-1.org/10-0-0-1/

Now discussing:

A train came, and, going to the end of the car, where the smell of a toilet was chronically felt, I, to my surprise, did not find seats. 37 and 38. The conductor shouted to me across the whole car that I was carried in the wrong place, the seats were next to the compartment of the.

Conductors - the compartment was two-seater.



1000 1001 1002 1003 1004