Pcsx2 save states

Pcsx2 save states DEFAULT

You need Flash player 8+ and JavaScript enabled to view this video.

Instructions & Additional Information


to request tutorials

Playstation 2 emulator pcsx 2 doesn't have a gameshark plugin like pec in epsxe but it is possible to hack the save states.


Required:

Hex editor


Ability to compress and uncompress gz files


The steps are:

1. Accumulate over 65536 gold (best for rpgs or scores =P) . Eg. 74025
2. Convert that number into hex with a calculator. Eg. 12129
3. Add a 0 to the beginning if it's an odd number of digits. Eg 012129
4. Think of the number in pairs. Eg. 01 21 29
5. Reverse the order of the pairs. Eg 29 21 01
6. Add the gz extension to the savestate.
7. Unzip the savestate with 7-z.
8. Open the uncompressed savestate with a hex editor and search for the number sequence from step 5 (no spaces) .
9. Change the value replacing the string with FFFFFFF or whatever you want to change the value too (keep in mind you have to reverse the order of the pairs if you have a specific number you want to change it to) .
10. Save and recompress the uncompressed file with 7-zip.
11 Delete the gz extension.
12 Load the game and see if it worked. If it didn't reset the changed code to its original value, find where the number occurs again in the savestate: recompress, reload, repeat.

%%emulation

Video Information

Video Duration:8 minutes 48 seconds
Release Date2 years 352 days 47 minutes 59 seconds
Rating:4
Favorites:141
Total Comments:
Times Rated:171
Total Views:118883
Keywords:pcsx, pcsx2, hack, hacking, memory, card, memorycard, cards, save, state, savestate, zst, ps2, psx2, epsxe, states, gameshark, emulator

Comments



Sours: https://youtube.jimmyr.com/tutorials/D3ioynT5760.php

Emulator Problem: Loading save states from previous ROM in PCSX2

Hello,

Sorry if this question has already been asked - I searched and found a lot about memory card save files, but not the save state files. Hope someone can help me out.

I was playing a game, but had to format my computer for an unrelated reason. I backed up the "PCSX2" folder from My Documents, then when my computer was up and running again, I restored my backups. One issue is that I am using a different copy of the ROM than I was before, but the same game.

Anyhow, when I load the game now I can load my saves from the memory card, but not the saved states. The folder "sstates" in PCSX2 has files in it that must represent these saved states (this is the only game I've played), but even if I try to open them directly using PCSX2 I get the error "File not found. Path: IsoFileSystem". Does this have something to do with my ROM not being in the same directory it was previously, or maybe not using the exact same ROM as previous...? Is there any way to load these saved states?

Thanks for your time everyone!

 

Sours: https://forums.emulator-zone.com/index.php?threads/loading-save-states-from-previous-rom-in-pcsx2.23272/
  1. Portable closet shelves
  2. Crochet potholder double thick
  3. Twitter shadowban test
  4. Range rover parking brake
  5. Rubber duck party invitations

In old-days, plugin uses to directy poll the event loop. Run mymc and click the "open" button, navigate to where you're PCSX2 memory card file is and open it. Place the .psu file onto a USB. dual core 3.2 GHz OR i3/i5/i7 2,8 GHz or better. You can use this feature manually by going into the File menu or by quick keyboard shortcuts. Save states is a feature that saves the exact spot you are in any game. Then they're sent to the plugin. Downloaded ePSXe to try out Silent Hill. You could create that file and name it appropriately to see if that helps. If you are using an emulator, you will not need any special hardware save for a decent computer. privacy statement. I have a branch for it but bug fixes have a higher priority. You save a state, then when you try to reload it nothing happens. PCSX2 is a PlayStation 2 emulator for Windows, Linux, and Mac that was started by the same team that brought you PCSX (a PlayStation emulator). Disclaimer: I am not a part of the PCSX2 team so feel free to contribute information and correct me when I'm wrong. 4 days ago. You may have to register before you can post: click the register link above to proceed. Thanks, I'm kind of new to this emulating stuff. The PS3 doesn't have a PS2 BIOS in it, it would be a lot of bulk (you don't need the PS2's menu, memory card manager, etc). The configured gamepad keeps on working correctly.. Then you tab out, and let go of the key, the window due to having lost focus never gets the up/release for the 'ALT' key, so it still thinks that the alt-key is pressed, even though it isn't. Hey, so I turned my computer after I figured I had done everything correctly in regards to exiting the emulator safely. Opening the emulator again, it seems the save state has disappeared. Keyboard shortcuts (or hotkeys) allow for quick access to some emulator features. In most cases, PCSX2 will be used. I have the most recent version installed. I loaded the game through PCSX2 and waited until I got to the 'press start button' screen. Mmm, yes i'm actually currently using the keyboard exclusively, it was a hypothetical for the future ;). Save states aren't working. That's how you'd do it! Not quite. The PCSX2 project is Open Source (GPL) and keeps an active SVN (SubVersion) repository. In an RPG when you save your game at a save point and close/re-open Mednafen, you find that the save is lost. Hey, I recently started trying out pcsx2 to play a few of my old ps2 games and so far it's running much better than I expected One problem I'm having is that save/load state isn't working for me at all. I tried it last night and it does exactly what I was getting at in the OP. Have a question about this project? also with your build i don't think the emulator will run very well even with a graphics card in it. If this is your first visit, be sure to check out the FAQ by clicking the link above. Everything seems to be fine except the save states. Description of the issue: I've been testing the new TAS recording options on Windows, and I was pleasantly surprised by how good they work; but when I tried them on Linux, the emulator couldn't start the game. I do this because each has its advantages in compatibility with certain games. This feature gives you a header-only C++ library with bindings in C, Python, Rust, Lua and C# which allows you to communicate with the emulator and the underlying game it emulates. This tutorial is written according to the most easy step by step methods. Anyhow, this is the message I get in my console when I try to load the save state. My instinct is no. I think the loop is still active even if I expect it to remain empty. I also can't take screens with f8. Want to make advanced TAS tools? Step-1 (Download the PCSX2 packages) Strangely it's only application keys (ESC, F1, F3 etc). to your account. So after you focus the window again and press F1/F3 or any other key, it handles it as ALT+F1, or ALT+F3, etc. I looked at the save state folder and the save state is there but I guess it's not loaded in to the slot properly or something. For example, shortcuts can be used to save/load states, remove FPS limit or test different interlacing modes. God of War wont boot properly. I did a little checking, and since the PCSX2 save state file is just a renamed zip file, it's easy enough to look at. We’ll occasionally send you account related emails. But I have a awfully loaded schedule. Following the wiki , you can create a savestate by pressing F1 and load a savestate by pressing … Like most emulators, PCSX2 supports the use of savestates. There are three ways to play Dragon Quest VIII: 1) An emulator. I looked at the save state folder and the save state is there but I guess it's not loaded in to the slot properly or something. (Also there is no in-game window feedback for save state, or the current selected savestate slot). So its always better to do it in the PCSX2… Once I figure that out, shouldn't be too hard. Multi Converter - 2.1 . This convenience is the biggest and most popular reason for using savestates. Yeah, I was working on that. When I booted up PCSX2 today it made me put my bios back in manually. The text was updated successfully, but these errors were encountered: It must. well everytime I try and run my kingdom hearts final mix iso image file on the program the screen that is supposed to run the game will come up and be plain white, then it will stop and say "PCSx2.exe has stopped working" and I've tried running through so many different things, I have a duo Core,vista 64-bit, 3GB Ram, intel 1545, can anyone possibly help me with my problem? I tried playing Saga Frontier and the graphic is just not working. Basicly you need to go format the memory cards, some games might not pick up unformatted cards or might not format them properly inside the game. Anyway, 0.9.7 seems to not want to save its settings anymore. Thanks, I'm kind of new to this emulating stuff. This MotionJoy program is a trainwreck, and I cant get my PS3 pad to work with PCSX2. There is one with zzogl plugin. Same goes for any other key you were holding whilst the window lost focus - also note that the left/right keys are handled independently. The window seems to have an event loop of sorts that handles all keys, and when it receives a down/pressed event for 'ALT' it sets a variable to handle all other events as though they have alt-pressed (I'm assuming). Emulator configurations that you changed such as adding a screen filter aren't saved. Already on GitHub? I have PCSX2 version 0.9.6 in my "My Documents" folder. I also get hideous green artefacts all over the screen. I also have 0.9.7 installed into "Program Files". To make it go back to normal, you only need to tap the alt key. You can lock all event to PCSX2 with CTRL-SHIFT-F12 (again to leave PCSX2 window), Hmmm, it seems like alt+tabbing between the pcsx2 application windows (main emulation, game view, log) makes the window manager very confused and the events start to go to the wrong window (probably). I went to the PCSX2 emulator and made a save state for that exact moment. I would then shut the game down and set my renderer to Hardware (both Direct3D 11). It should capture obj. By editing the save states you can change the save points in a game and give yourself more items. Nothing happens when I press f1-f3. Emulator Problem: PCSX2 - My save state has become corrupt! And you can use PCSX2ModelConverter and adjust the model. Multi Converter is a powerful tool for converting raw cheats to PCSX2's pnach format, creating and editing PCSX2 cheat patches and even providing a save state … The screen just turns black when I try starting the game, although I can still hear the music alright and even the sound of the cursor moving (which means that the game doesn't freeze, still responding but just no image). Start PCSX2 without a game loaded, then use run>execute. It is updated like Windows 10 in the mind. Ever wanted a game to trigger a save state? Thanks for the info dickmedd Do you also have this problem, like some games not working on PCSX-R? Try Shift+F3 to loads the backup save state, http://forums.pcsx2.net/Thread-Savestate...#pid411959, Cheats decrypter/converter/editor and more. Notice, however, that if you have a 64 bit machine and you choose to grab one of the AUR versions, PCSXR will be compiled to 64 bit architecture, rendering it incompatible with the vast majority of the plugins, which are 32bit only. This tutorial requires the use of a hex editor. Sign in The current version of PCSX2 (1.0.0) can save Savestates. Additionally, you can also install the pcsxr-gtk2AUR package for the GTK2 version, which allows to run GTK based plugin interfaces without having to install lib32-gtkAUR from the AUR. Install the stable pcsxrAUR package or alternately the pcsxr-gitAURfor the development version. I think PCSX2 ( PS2 emulator) requires a graphic adapter. When I booted up PCSX2 today it made me put my bios back in manually. The player does not need to find a game save point or wait for a lull in the action - a single hotkey press is all it takes to trigger the creation of a savestate. 2) A Playstation 2 3) A backwards compatible Playstation 3 First we will need to get the appropriate hardware. So, I can start a game of NCAA and not have to worry about finishing it all at one time if something comes up. The keyboard is much more complex. PCSX2 version: PCSX2 1.5.0-20190517234655 - compiled on May 18 2019. Use an older version of PCSX2 like Version 0.9.8. However, when I tried to get on today my save state wasn't working and the last time I saved my game (Dragon Quest VII) was about 4 hours behind where I had my save state. The file you're missing in the slot 8 file is just four bytes, 00 00 0B 9A to be specific. It would be kinda nice to be able to savestate/cycle/loadstate on a gamepad. PCSX2 fully supports memory cards. It the most advanced gaming operating system packed with the most advanced operating system. 8800gt graphics card or better it needs Direct3D10 support. Normally events are intercepted by PCSX2 main windows. This will create a .psu file containing the files necessary to create a save file on an actual Playstation 2 memory card. It would be nice to have savestate and load savestate shortcuts. It says it saves and can load the save just fine until I close the emulator. Successfully merging a pull request may close this issue. In the table below, highlight the save file you wish to transfer and then click export. PCSX2 options: Preset: Safe (Default) Relevant: #2412. Pad are directly polled from the linux driver state, it would work even on a different virtual desktop. These slots are reserved to allow you to save up to 10 different save states. F2 : Change State F3 : Load State it's actually working like quick save game "the best part is that the games won't know u saved like Resident Evil & so on" anyway you have 5 different states to save on them & u can change between them by using F2 and to load the saved state just select the state you want by F2 then press F3 to load it & that's it (Also there is no in-game window feedback for save state, or … GSdx doesn't have any OSD. Note: Some of these hotkeys (such as F6 and F9), although not GSdx-specific, will not work with other GS plugins. The PCSX2 is the PS2 emulator. Learn how to hack save states on the PCSX2 Playstation 2 emulator for the PC. Add Me ON FB FOR SVR 11 HACK https://www.facebook.com/mohammad.muzammil.9469 But if your game crashes, use the new version to save a save state and run the older version with the save state and a point of the game and your game should not crash at on point. Thanks! Hmmm, it seems like alt+tabbing between the pcsx2 application windows (main emulation, game view, log) makes the window manager very confused and the events start to go to the wrong window (probably). Recommended: Windows vista/7 with the latest DirectX. Anyhow, this is the message I get in my console when I try to load the save state. By clicking “Sign up for GitHub”, you agree to our terms of service and Capturing a state: To capture a save state go to File > Save state and choose any of the 10 slots. 2. Honestly it is not difficult to implement. Instead, it has some high level code that simulates the bios (something that would be a PITA to reverse engineer, but luckily Sony knows how it's PS2 bios works and can easily program one). As a temporary solution don't alt-tab (just double click to reduce full screen). I got stalled though because I can't figure out how to make a new tab in lilypad. Sign up for a free GitHub account to open an issue and contact its maintainers and the community. On the linux port, if it isn't the same on the windows port. Im pretty sure it is not scaling the resolution any higher, and just running in native. PCSX2 runs effectively on the Windows 10 platforms. An IPC protocol was added to PCSX2. Two things; 1. This has been discussed before and I believe @Sarania is working on Lilypad to achieve just that. You signed in with another tab or window. I would then start the game again and load the save state, which I saved in Software Renderer mode. I… In the mean time, you should see if there's any Linux alternatives to JoyToKey. Except if the shortcut is intercepted by the windows manager so it never hit PCSX2.

Sours: https://iimlibrariesconsortium.ac.in/public/csv/murders-in-jhlkg/d76f76-pcsx2-save-state-not-working

PCSX2

Operating System

Windows, Linux, macOS

PCSX2is an open-source, plugin-based PlayStation 2 emulator for Windows, Linux, and macOS. Its purpose is to mimic the PS2 hardware using a combination MIPS CPU interpreters, recompilersand a virtual machinewhich manages hardware states and PS2 system memory.

Hotkeys

  • F1: Save state
  • F2: Change slots
  • F3: Load state
  • F4: Turn On/Off Framelimiter
  • F5: Switch deinterlacing modes
  • F6: Switch Aspect Ratios
  • F7: Switch TV Shaders
  • F8: Take screenshot
  • F9: Switch between Hardware and Software mode
  • F10: Enable/disable logging
  • F12: Video Recording
  • Tab: Turbo Mode
  • Shift+Tab: Slow Mode
  • Esc: Pause emulation and return to GUI
  • Insert(Software mode): Turn/Off mipmapping
  • Delete(Software mode): Turn On/Off Edge Anti-Aliasing
  • Home: Turn/Off external FX Shader
  • Page Up: Turn/Off FXAA

Setup

Gamepad

Native DS3 controls with Lilypad-SCP - Import this with the 'Load Bindings' button in Lilypad's config.

Either that, or you can use the Pokopom XInput Plugin. If you use a DualShock controller running under an XInput wrapper such as SCP Server, then this plugin is a no-brainer. It's very customizable, and you don't have to configure it beforehand. All of the buttons are bound at startup.

Video Setup

Now, most of the video options are very straight-forward. However, there is one that probably bears explaining: The interlacing modes. Now, many games can run fine without interlacing modes. You can just select "None" and everything will be fine. However, some games will have a "jitter" effect if you don't have interlacing modes enabled. The "Sawtooth" interlacing method is not recommended at all. Artifacting is far too heavy to be usable. The "Bob" interlacing method has the least artifacts out of all of them, but it can still let some jittering pass through. The "Blend" interlacing method has the least amount of jitter. However, that comes with a pretty hefty side-effect: blurriness. Yes, the Blend interlacer does frame-blending. This is also known, more colloquially, as motion blur. This means that if there is heavy jitter, the video output will be extremely blurry since the two jittering frames will blend together. Only use this interlacing method as a last resort.

Issues

Blurry

It's either interlacing or a filter in the game itself. For the former, switching the de-interlacing mode with F5 may help, and may cause flicker or screen shaking. For the latter, hacks are required. Either Aggressive-CRC if the game is listed there, or skipdraw (toy with the number, 1-100) might work otherwise.

Black lines

Those lines are caused by scaling to a non-integer internal resolution (anything other than XxNative), texture filtering (if it cause issues try to set it to half at most or check it off), improperly offset textures(TC offset hack, Wild Arms hack), or improperly handled texture edges(Sprite hack). Native resolution for the most part fixes those. But software rendering may be required for particularly buggy games.

Guides and Info

Sours: https://emulation.fandom.com/wiki/PCSX2

Save states pcsx2

How do you save games on ePSXe?

How do you save games on ePSXe?

Capturing a state: To capture a save state go to Run > Save State and choose any of the 5 slots. These slots are reserved to allow you to save up to 5 different save states. Upon selecting a save slot, ePSXe will immediately return to the game. The keyboard shortcut for saving states is F1 to save in Slot 1.

How do I add a memory card to ePSXe?

Click “Config” and then click “Memory Cards.” Click “Select” to load the memory card file. Select the memory card file from the location on your hard drive and then click “‘Open.” Click “OK to use memory card files with ePSXe.

How do you save state on PCSX?

Save a state by clicking Emulator > Save States and selecting a slot or by pressing Ctrl+Slot Number eg. Ctrl+1 for slot 1. Load a state by clicking Emulator > Load States and selecting a state previously saved to a slot or by pressing Alt+Slot Number eg. Alt+1 for slot 1.

Can you save games on pcsx2?

Like most emulators, PCSX2 supports the use of savestates. Somewhat akin to saved games on a memory card, savestates allow players to save their progress in the games they are playing. Unlike memcard saves, savestates are “snapshots” of the emulator at the exact moment in time which they were taken.

How do I format a memory card on pcsx2?

From PCSX2 choose CDVD=>No Disk and then System=>Boot CDVD fast or full=>wait for the mini movie to finish and go to Browser=>hit X on each of the card and when it ask if you want to format the card,choose yes.

How do I run Pcsxr?

4:14Suggested clip 91 seconds(PCSX-Reloaded) Play PS1 (PlayStation 1 Emulator – YouTubeYouTubeStart of suggested clipEnd of suggested clip

Is Emuparadise safe?

All our files are 100% clean – GUARANTEED! You will always have a safe browsing experience at Emuparadise. That’s our promise!

Can pcsx2 run ps1 games?

PS1 mode for PCSX2 has now been added to the emulator. : Games.

How do I use ePSXe?

Step 1: Download ePSXe from the Google Play Store. Open the Google Play Store and search for ePSXe. Step 2: Download 7Zipper from the Google Play Store. Step 3: Download a BIOS File. Step 4: Unpack the BIOS File in 7Zipper. Step 5: Run the BIOS File in ePSXe. Step 6: Enjoy Your Emulator. 5 Tips on How to Choose a Custom…

Is emulator zone safe?

http://emulator-zone.com is completely safe. Emulator-zone.com is a trustworthy source that provides multiple alternatives for each system and ranks each emulator.

How do I run a .bin file on ePSXe?

PBP, . ECM), click on File -> Run ISO in the main program window and select the image. To run a disk image in an unsupported format, you will need to mount it with a separate program and configure ePSXe to use the virtual drive which the image is mounted to ( Config -> Cdrom -> Configure ).

How do I run a bin and cue file?

Open BIN / CUE FileRun PowerISO.Click the “Open” button on toolbar or choose “File > Open” menu, then select the BIN or CUE file to open. PowerISO will open the selected BIN / CUE files, and list all files with them.Click the “Extract” button on toolbar to open “Extract BIN file” dialog.Choose the destination directory for extraction.

How do you run games on pSX emulator?

BIOS setupExtract the BIOS from its zip file. Drag “Scph1001.bin” to pSX’s BIOS folder, as shown below:Open pSX. Go to File > Configuration, as shown below:Click on the BIOS tab. Then click the “…” button (shown below). Select the “Scph1001. Click OK. Then close pSX.

How do I run ECM files on pSX emulator?

StepsOpen the folder and look for “unecm.exe”Click and hold the ECM file, then drag it on top of “unecm.exe” and let it go. Wait for the process to finish. Once the process is finished, the window will close automatically, and the ECM file will be a BIN file.

How do I convert a BIN file to disk image?

Please run WinISO. Click the “Tools” button on the menu, and then select the “Convert Image File Format…” option. The “convert” dialogue will be pop-up. Press the “Browse…” then choose a BIN/CUE file you wish to convert and choose the “ISO files(*.

How do I extract ECM files?

To use ECM tools, find the ECM file in question and drag and drop it over the unecm.exe file. Unecm.exe will automatically open up the ECM file, decompress the file, and close after. That’s it! You now have a useable CD image that has been decompressed!

Sours: https://boardgamestips.com/card-games/how-do-you-save-games-on-epsxe/
PCSX2 Full Setup guide for 2021

Thread: Ultimate Save State Thread

You are going to need a more complex code to support more than one slot in this is the case and if there is no alternative on the emu.
Did you tried to ask on the emu forums/git if there is any other way to choose the slot to save or to start from a fixed slot?
As the emu is still under development, maybe they could help you on that.

Anyway, if that is not possible, you are going to need to create a code on the module, under the Save state slot label, that reads from a module setting the current saved slot, saves the game and update the current saved slot once it is done saving.
This would only work if you only use RL to save your games, as the current selected slot info would be loose if you don't.
A much more complex code could try to parse the current slot info given from the emu on the screen, but this would require some more knowledge on AHK codding.

If you want to try the RL module label way, I wrote about two or three weeks ago a post about using the save and load state labels under more complex save cases (where simple fixed key presses are not enough for the emu).
Just try to search for it if you want to know a little bit more about it and make any questions you want and I will try to help you on the process.

Edit: by the way, thank you very much for sharing this!!!
Please keep doing it as it is a huge contribution for us.
Also, if you simply add to the list the emus that out are able to make work with the default emu config, the ones that need some special configurations and the ones that you can't add support for the save and load state features we would appreciate a lot.
I promise you that whenever I can I will try to add support for any problematic emus to improve your list!!!


Sent from my XT1068 using Tapatalk

Sours: http://www.rlauncher.com/

Similar news:

PCSX2 Tutorial

About PCSX2

PCSX2 was the first PlayStation 2 emulator. Through persistent development, it has remained the best one around! Game compatibility is high. It conveniently comes equipped with its own plug-ins, which can be customized. PCSX2 requires a fast computer in order to run well. You might have trouble with it if you're using a budget laptop or a Windows tablet.

With other emulators you can get away with using your keyboard for gameplay. But with PCSX2 it's pretty difficult, given the PlayStation 2 controller's mini joysticks. I strongly recommend purchasing a gamepad for this emulator.

Where to download PCSX2

You can download PCSX2 from the official homepage. However, note that they have a reputation for not being diligent at keeping their download of PCSX2 up-to-date while PCSX2 itself was still being updated. They kept it outdated for years until mid-2020. If you want to be absolutely sure to download the latest version of PCSX2, you can grab it from their Github automated builds page.

Intro to plug-in system

PlayStation 2 emulation revolves around the plug-in system. The same system used by PlayStation 1 and N64 emulators. PlayStation emulators are merely the shell of the operation.

PCSX2 already comes equipped with plug-ins, so you don't have to worry about downloading them separately and configuring them. I still want to review the different types of plug-ins with you. It's good to be informed with how the emulator works. Here's the list of them:

  1. GS - the graphic plug-in. This controls the graphics and 3D rendering.
  2. PAD - the controller plug-in. This controls how you control your games; whether you use a keyboard or a gamepad.
  3. SPU2 - the sound plug-in. This controls the music and sound effects.
  4. CDVD - the CD/DVD plug-in. This controls the reading of your CDs/DVDs or images.
  5. USB - the USB plug-in. This controls USB emulation.
  6. FW - the firewire plug-in. This controls the firewire port of the PlayStation 2.
  7. DEV9 - the hard disk & Ethernet plug-in. This controls the HDD (hard disk drive) and Ethernet emulation.

Note that you don't have to stick with the plug-ins that come with PCSX2. You might find better ones out there if you Google around.

The BIOS

The PlayStation 2 BIOS is required in order to boot games. This is a separate download after you've downloaded PCSX2. Below you can download this BIOS.

  • PlayStation 2 BIOS (12.7 MB). Download by right-clicking the download link and go to Save Link As. When saving, rename the “_ip” file extension to “zip”. If you don't see the file extension, try showing them. I also made this GIF animation to show you how to change the file extension.

Continue reading below for what to do next after you download the BIOS.

Installation

Newer versions of PCSX2 are just standalone programs in a zip file. Older versions of PCSX2 install via a wizard. I'll explain both scenarios.

Installing the standalone program (newer versions)

Installation is simple: just extract PCSX2 from its zip file. Not sure how to extract zip files? Here's a video tutorial showing you how: how to unzip files on Windows.

IMPORTANT! PCSX2 must be placed in a common folder on your computer. I recommend Documents, Downloads, or create a folder on your desktop. If you place PCSX2 somewhere else on your main C drive, then you may be restricting it to read-only access. Doing so prevents PCSX2 from saving anything.

Using the install wizard (older versions)

  1. Double-click on the install EXE for PCSX2. It'll look something like PCSX2's install EXE
  2. The “Choose Components” box will be the first screen to pop up:
    Choose Components
    Leave everything checked and click Next.
  3. The installation will proceed. You'll be prompted with this box to Visual C++:
    Load your game
    Put a check that you read the terms and click Install.
  4. PCSX2 is installed! But we're not done yet. Read the next section about what to do when you open PCSX2 for the first time.

First Time Configuration + BIOS setup

  1. Open PCSX2 by double-clicking on PCSX2's EXE. If you installed PCSX2 with an install wizard, you'd open it by going to your Start menu (your programs list) and open up PCSX2 there .
  2. PCSX2 welcomes you with the First Time Configuration screen . Click Next.
  3. The next screen just reviews the plug-ins that come with PCSX2. You don't need to do anything here. Click Next.
  4. Next is the BIOS screen. Click Open in Explorer, as shown below: Select 'Open in Explorer'
  5. You'll be prompted with a “This path does not exist. Create it?” window. Click Create.
  6. Now minimize this “First Time Configuration” window. Note the path where the BIOS folder is located. Open up that folder. Download the BIOS if you haven't already, unzip it, and drag its contents to the BIOS folder. It should look something like below:
    The BIOS files in the BIOS folder
    It's very important that you match the above screenshot on your end. Don't place the BIOS files in a sub folder within the BIOS folder!
  7. Bring back the “First Time Configuration” window. Click the Refresh list button (circled below). You should now see the Europe, Japan, and USA BIOS files appear in the white box.
    Click 'Refresh list', then click on your preferred country
  8. Click on your desired country to select it. Then click Finish.
  9. That's it! PCSX2 is now fully installed and configured.

Setting up the keyboard or gamepad

Usually emulators have all the keyboard keys preconfigured, but PCSX2's keys are a clean slate the first time you open it! You have no choice but to configure them. Again, I urge you to purchase a gamepad since the PlayStation 2 controller has a lot of buttons. Using just the keyboard is a frustrating experience.

Here's how to configure the buttons for Player 1:

  1. Go to Config > Controllers (PAD) > Plugin Settings, as shown below:
    Accessing the Input configuration
  2. You'll see tabs for General, Pad 1, and Pad 2. Pad 1 is Player 1 and Pad 2 is player 2. Click on Pad 1 and you'll arrive here:
    The Input configuration
  3. Notice the heavily buttoned area within the red outline. These are all the buttons you need to configure. Click a button in this area, then press the keyboard key or gamepad button that you wish to configure it to. When successful, you should see the configured button appear in the “Device/PC Control/PS2 Control” panel.
  4. Click OK when you're finished configuring all the buttons.

Using a PS2, PS3, or Xbox controller

PCSX2 doesn't require any special directions for using a PlayStation 2, PlayStation 3, or Xbox controller. However, the first time you plug one into your computer it needs to be properly setup or requires special instruction for connecting. There are lots of videos on YouTube showing you how to do this:

Loading a real PS2 game you own

Loading a real PlayStation 2 game that you own is incredibly easy. Just pop the game in to your DVD-ROM drive, wait a few moments, then in PCSX2 go to System > Boot CDVD (full).

However, I do not recommend playing your games via your DVD-ROM drive. PCSX2 is a rather demanding emulator on your CPU. Running the game from your DVD-ROM drive will slow it down and lower its performance. Rather, I recommend ripping your game to an ISO. I have directions for that towards the bottom of this guide.

Loading a PS2 ISO

  1. To begin with, you can place your PlayStation 2 ISOs wherever you want on your computer. PCSX2 doesn't care where. I recommend the PCSX2 folder in Documents.
  2. Go to CDVD > ISO Selector > Browse, as shown below:
    Selecting the ISO Selector
  3. Navigate your computer for your PlayStation 2 ISO. Click on it, then click Open.
    *Note: PCSX2 only supports ISO, BIN, IMG, MDF, NRG. And games must be extracted from their ZIP, RAR, or 7Z file. I talk more about this here.
  4. Go to System > Boot CDVD (full). Wait a few moments and your game will load. Enjoy!
  5. PCSX2 will keep every ISO you previously opened in the ISO Selector list. See:
    The game list in ISO Selector
    So then the next time you open PCSX2, you can just select the game you want to play from this list.

Q: Games get stuck at loading screen!

You may find that some games get stuck at the loading screen when you try to load them. There are several possible factors to this problem. Try running through this checklist:

  1. Download other games and try loading them. Rule out if this is a game-specific issue or a global issue with all your games. If it's a global issue, PCSX2 may not be setup correctly or PCSX2 may not be compatible with your computer.
  2. Make sure the file format of your game is supported by PCSX2 and extracted from its archive. I talk more about this below in “My PS2 game is not an ISO. Help!
  3. It's possible the problematic game is partially corrupt or a bad file. Try downloading it from other websites.
  4. You may be able to fix it by tweaking around settings. Try the recommendations in this video: 8 Ways To Fix The Black Screen Freeze PCSX2 Emulator.

Q: My PS2 game is not an ISO. Help!

PCSX2 only supports games (a.k.a. disc images) in ISO, BIN, IMG, MDF, and NRG. Or more specifically, the filename of your game needs to be “Shadow of Colossus.iso”, “Shadow of Colossus.bin”, etc. Keep reading if the PS2 game you downloaded is not in these formats.

Wait, I don't see file extensions

Windows hides file extensions by default. Here are directions on how to enable them.

If your game is in ZIP, RAR, 7Z

These formats are forms of compression, and your PS2 game is inside of it! You need to extract it. Windows can extract ZIP files by default: here are directions. To extract a RAR or 7Z file you can use 7-Zip (it's free).

If your game is in UIF, DAA, CDI, XBX, B51, BWI

These ISO formats are exclusive to specific burning software. Google around to find what program is associated with that format. Once found, install it and burn the game to a DVD. However if you want my opinion, I say just forget about it. You should try to download the game from somewhere else to get it in ISO or BIN format. Working with these proprietary ISO formats are too much trouble.

Fullscreen

Press Alt+Enter to enter fullscreen. Press Alt+Enter again to go back to window mode.

Improving speed

With today's computers you don't need to use PCSX2's speed hacks. The default settings are fine for most people. Maybe if you're on a Windows tablet or a budget laptop, you'd need to make use of the speed hacks if you find that games are running slow.

PCSX2 makes adjusting game performance very easy with a simple slider. First, access the video plug-in settings by going to Config > Video (GS) > Core GS Settings, as shown below:

Accessing the speed hacks

Look towards the bottom left for this slider shown below:

The Speed Hack Preset

The default setting is “2 - Safe (faster)”. Hovering over the slider pops up this information:

The Presets apply speed hacks, some recompiler options and some game fixes known to boost speed. Known important game fixes will be applied automatically.

Presets info:

1 - The most accurate emulation but also the slowest.

3 --> Tries to balance speed with compatibility.

4 - Some more aggressive hacks.

5 - Too many hacks which will probably slow down most games.

Try moving the slider to “3”, click OK, and see if your game is running better. If it's still slow, try “4”. If that doesn't help, then I hate to break it to you but your system is not fast enough to handle PCSX2.

Fixing graphic glitches in 2D games

Graphic glitches around bounding boxes of sprites

The default settings in PCSX2 cause 2D games to have weird graphic glitches around the bounding boxes of graphics and sprites. See above for an example. There's an easy fix for this.

  1. Go to Config > Video (GS) > Plugin Settings, as shown below:
    Accessing the video plug-in's settings
  2. Select the “Internal Resolution” drop-down selection, as shown below:
    Increasing the size of the internal resolution
    Choose 2x Native.
  3. Click OK and see if that fixes the graphical glitches. If it doesn't, go back and select 3x Native. Either of those options should fix it.
  4. Note: Increasing the internal resolution will most likely cause your 3D games to slow down. You would need to adjust the internal resolution every time you switch between playing your 2D and 3D games.

Save states

Save states is a feature that saves the exact spot you are in any game. You can use this feature manually by going into the File menu or by quick keyboard shortcuts.

Using the save state feature via the File menu
  • Capturing a state: To capture a save state go to File > Save state and choose any of the 10 slots. These slots are reserved to allow you to save up to 10 different save states. The keyboard shortcut for saving states is F1.
  • Loading a state: To load a state you previously saved, go to File > Load state. Then choose the slot where your save resides. The keyboard shortcut for loading saves is F3.

Fast forward

Fast forward is the feature that speeds up the game. To access it, press the Tab key. To end the fast forwarding, press the Tab key again.

Hiding the annoying console window

The console window

Unless you're an advanced user who cares about console logs, this thing is an eye sore. You can hide it by going to Misc > Show console.

Capturing screen shots

PCSX2 doesn't have the ability to capture screen shots. Rather, I have a cool solution for you. Download ShareX. It's free and supported by Google! Once installed, you can just press Ctrl+Prt Scr and hover over the game screen. ShareX will capture the game screen as if PCSX2 just took a screen shot. ShareX will dump the screen shot in Documents > ShareX > Screenshots.

Backing up your PS2 games to ISO

Perhaps you prefer using your own PlayStation 2 games instead of downloading them from the Internet? Or maybe you just want to keep backup copies of your PlayStation 2 games? Whatever the case, here's how you can dump your games:

  1. Download & install RetroArch for Windows. It's the #1 multi-system emulator. I have a tutorial for RetroArch for Windows as well.
    • Note: During RetroArch's installation, setting a custom destination for RetroArch matters. It'll be easier for you to find RetroArch if you select an easy-to-find folder such as Documents. Otherwise, RetroArch defaults to your AppData folder deep in your C drive, which can be a little annoying to locate.
  2. Put your game CD in your computer's DVD-ROM drive.
  3. Open RetroArch and select Dump Disc - as shown here
  4. On the next screen, select your DVD-ROM drive (the first option, most likely).
  5. You're going to see this progress bar appear on the lower-left of the screen:
    Progress bar for dumping an ISO
    Depending on the speed of your DVD-ROM drive, this will probably take 5-20 minutes to finish.
  6. When RetroArch finishes dumping your game CD, the progress bar will disappear. It doesn't prompt you with an alert sound or anything. If your DVD-ROM was humming during the dumping, you'll know RetroArch finished when your DVD-ROM's humming sound stops.
  7. RetroArch dumps the ISO of your game CD in its Downloads folder. So the next step is locating the Downloads folder. This is why in step #1 I noted to install RetroArch in an easy-to-find location. If you installed RetroArch in, say, your Documents folder, go to Documents > RetroArch > Downloads to find your game CD's ISO file. Otherwise, RetroArch is in the AppData folder. Here's how to find it:
    1. Open the Windows File Explorer. The easiest way to open it is to click the folder icon in your home row of apps. If a folder icon isn't present, you can also do this: in the “Type here to search” area type “file” and you'll see a File Explorer app appear at the top of the search results - as shown here .
    2. In the left panel, look for Local Disc (C:). Click on it, then in the main panel click Users - as shown here .
    3. Next, double-click on the folder for the user you are currently signed in as.
    4. In your 'user' folder, currently “AddData” is hidden. We need to make hidden folders visible. Click on View then Options - as shown here . Then click the View tab then click the radio bullet for Show hidden files, folders and drives . Click Apply then OK.
    5. The “AddData” folder should now be visible . Double-click on it. Then double-click on Roaming > RetroArch > Downloads.
  8. Now we're in the Downloads folder! You should see a BIN file and a CUE file with a weird filename like “cdrom-200000-1000000” - as shown here . Double-click on the CUE file and choose to open it in Notepad. You'll see the text that's shown in my picture.
  9. Next, rename the CUE file and BIN file to the name of your game. Open the CUE file in Notepad to rename the ISO as well. You can name these files to any name you want. The only requirement is that both files & the name in the CUE file must be the same exact name. Look here - these three instances need to be changed to the same name.
  10. That's it! You've successfully dumped your PlayStation 2 game. You can use it with any PlayStation 2 emulator or any multi-system emulator that supports PlayStation 2.

Q: The screen is obscured with a white bar!

White gradient on the screen

PCSX2 might cover the screen with a white bar or gradient. It might look something like the picture toward the right. This is a video related issue. It could be PCSX2's fault or the fault of your video card. Try the following.

Is this a video card issue or PCSX2 issue?

The first step is to figure out whose fault this is. If the visual obstruction is a white gradient, that's definitely a PCSX2 issue and you can skip this section to “Attempt #1” below. If your visual obstruction is a white bar, keep reading here.

The easiest way to figure out fault is to try other video game emulators. Or even try connecting a second monitor (if one is available). If the white bar is present elsewhere, then this is definitely a video card issue. Try what Microsoft recommends to fix this. Well, even if you don't see the white bar in other emulators, I'd try Microsoft's recommended troubleshooting anyway.

Attempt #1: Update PCSX2

Are you using an older version of PCSX2? Or did you download PCSX2 from its official homepage? (Note that the official homepage hasn't been updated in years.) The issue could be as simple as you just need to download the latest version. You can find it on this 'automated builds' page or my emulators page.

Does updating PCSX2 not fix the issue? Try the next troubleshooting measure.

Attempt #2: Is this game-specific?

Does this issue happen with just one game or all of your games? If it happens with just one game, maybe the ISO is partially corrupt. Try downloading the game from another website.

If this same issue happens with more than one game, try the next troubleshooting measure.

Attempt #3: Change the Renderer

Perhaps tweaking the video plugin's renderer will help.

  1. If you currently have a game open, close it.
  2. Enter the settings for the video plug-in. Go to Config > Video (GS) > Plugin Settings.
  3. Look at the “Renderer” drop-down. OpenGL (Hardware) is the default selection. Click on this field and select a different renderer from the list.
  4. Click on OK and open your game. If the white bars are still present, select a different renderer and try again.

If none of the above troubleshooting measures resolved your issue, I would conclude that PCSX2 is not fully compatible with your device.

Q: I get 'CDVD plugin failed to open' error

Sometimes when PCSX2 is force closed it gets screwed up and spits out this error every time you try to load a game:

CDVD plugin failed to open. Your computer may have insufficient resources, or incompatible hardware/drivers.

To fix this you need to force close PCSX2 (again) and select a different graphics plug-in. This video shows you how.

Finding ISOs

In my links page, I have some good links to sites where you can download ISOs. If you want to try to find more sites than what's in my collection of links, just Google around. For example, if you want to download Shadow of the Colossus just Google “download shadow of the colossus ps2”.

However, an even better use of Google is to search Reddit. People upload PlayStation 2 games to cloud platforms all the time. You'll only find these links to such valuable resources on Reddit. Try search phrases such as “reddit download playstation 2”.

Thank you for reading my tutorial! If you found it useful, please spread the word that this is an awesome site to get help with emulators and emulation! If you have questions you're welcome to email me or message me on social media.

Sours: https://fantasyanime.com/emuhelp/pcsx2


1030 1031 1032 1033 1034