H1 diamond color

H1 diamond color DEFAULT

Diamond Color Chart

Diamonds come in a variety of colors, some of them highly prized (pinks, blues, even yellow). However in a white diamond, the presence of a yellow tint will lower the price of a diamond. The less body color in a white diamond, the more true color it will reflect, and thus the greater its value.

Every Lumera Diamond has been assigned a color grade by the GIA in a viewing environment specially designed to eliminate color from surrounding surfaces as well as the light source itself. This allows the color of the diamond to be accurately measured. Minor differences in diamond color detected in this environment are very difficult if not impossible to detect in a normal environment. The diamond industry has adopted the GIA diamond color scale; almost every diamond sold today is rated using the GIA color scale, whether it was actually certified by the GIA or not.

The GIA grades diamonds on a scale of D (colorless) through Z (light color). All D-Z diamonds are considered white, even though they contain varying degrees of color. True fancy colored diamonds (such as yellows, pinks, and blues) are graded on a separate color scale.

Below is the GIA diamond color chart with definitions, accompanied by further explanatory comments from Lumera:

GIA Grade Color Scale

The photo below shows a master set used by gemologists to grade color in diamonds. Each diamond to be graded is compared to the master set to determine where it should fall on the diamond color scale. The colors you see below are slightly exaggerated, since viewing diamonds face down makes their body color more pronounced. The face down orientation makes the detection of body color easier because brightness and fire are minimized when the diamond is face down.

Actual Diamond Color Scale

Actual Diamond Color Scale D-F

Actual Diamond Color Scale G-J

Actual Diamond Color Scale K-M

Color becomes much harder to detect once a stone is set in a ring and placed in an environment that contains color (as opposed to the all white background used in diamond color grading). For instance, an H color diamond may look as colorless as a D when set in a ring under normal lighting conditions, especially if the two are not compared side by side.

Another factor that affects a diamonds's apparent color is the color of the mounting itself. Yellow gold makes slight amounts of yellow in a diamond less obvious, while white gold or platinum mountings make the color in yellow diamonds more apparent.

The vast majority of untrained observers (and many gemologists) cannot distinguish a color grade from the one just above or below unless the diamonds are compared side by side in a controlled environment.

Color becomes more important as carat weight increases, because color is easier to perceive in a larger diamond, just as a carafe of white wine shows more color than a single glass.

Questions about color or other aspects of a diamond? Ask a diamond consultant for answers. A consultant will answer any questions you have, and if you like, search for diamonds on your behalf that match your criteria. chat online, or send your request to [email protected]

Buying Tip:

For the best value in what would appear to the naked eye as a colorless diamond, look for G-J diamonds. Because color is easier to detect in larger diamonds, opt for G-H in diamonds over 1 carat, and I-J for those under 1 carat. Once set in a ring, these diamonds will look just like higher color grade diamonds. Instead of investing in higher color, invest in higher cut, the most important factor in a diamond's brilliance.

Because diamonds with more facets reflect more light, they tend to hide color better than other shapes. So, consider round, princess or other modified brilliant cuts over step cuts such as emerald or asscher if you are concerned about color.

If you are concerned primarily about carat weight, and are on a tight budget, consider a yellow gold setting and a round diamond in the K-L color range. A lower color diamond with a higher cut grade will have more sparkle and visual appeal than a higher color diamond with a lower cut grade.

If, while shopping for a diamond, you are ever given a color range (e.g. G-H) as opposed to a specific grade, the diamond is not certified by GIA. The seller is only estimating the diamond's color using GIA terminology.

Visit the Lumera Diamond Buying Guide for additional tips and advice.


Next: Diamond Fluorescence

Sours: https://www.lumeradiamonds.com/diamond-education/diamond-color

    Diamond Pro is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn More.

Deal Alert! 15% off at Blue Nile!

If you are considering an H color diamond, you are right in the wheelhouse of our favorite color to recommend. After all, who wouldn’t want a stunning diamond like this one from Blue Nile?  Can you really tell the difference between that diamond and this D color diamond? Even if you notice a slight difference, is it worth spending 40% more?

H color diamonds fit into the “near colorless” range of the GIA’s diamond color scale. In the right cut, they can be tremendous value for money, offering almost identical looks to a colorless stone at a significantly lower price. 

Below, we’ve explained what H color diamonds are, as well as when this diamond color grade is worth considering for an engagement ring. We’ve also compared H color diamonds side by side with diamonds of other color grades to give you a full understanding of their appearance. 

What Are H Color Diamonds?

Diamonds can range a great deal in color, from totally colorless to quite strongly yellow tinted. In some cases, diamonds can even come in fancy colors such as pink and champagne. 

In our guide to diamond color, we explain that all diamonds sold with certification receive a color grade that’s based on the GIA’s diamond color scale. The scale ranges from D (colorless) all the way to Z (visibly yellow).

The stronger a diamond’s natural yellow tint, the lower its grade, resulting in a letter further into the alphabet.

A diamond that’s as close to perfectly free of color as possible will receive a grade of D. These diamonds are extremely rare and make up a tiny percentage of all diamonds sold. They tend to cost a significant amount more than diamonds with lower color grades.

H color diamonds are part of the “near-colorless” area of the GIA’s color scale. This means that they appear almost totally colorless when they’re viewed with the naked eye, but could show a slight yellow tint when they’re viewed under magnification by an expert gemologist. 

If you’ve read our guide to diamond color, you might have seen that we recommend the H color grade quite a lot — in fact, it’s our recommendation for many diamond shapes set in metals like white gold and platinum. 

This is because, contrary to what many diamond jewelers will tell you, the difference between a D color diamond and an H color diamond is often surprisingly difficult to spot, particularly for a non-expert without a jeweler’s loupe handy. 

However, the difference in price is very easy to see — something we’ll cover a little further down the page. 

Comparison: H Color Diamonds vs. Other Color Grades

As we mentioned above, the H color grade is part of the “near-colorless” range of the diamond color scale developed by the GIA. In fact, the H color is actually the second-highest color grade in this category (G is the highest, with D, E and F part of the “colorless” range). 

Because H color diamonds aren’t part of the “colorless” section of the scale, it’s quite common for people to assume that they must have an obvious, visible yellow color. 

However, this is not the case. Even in a brightly lit room and under magnification, it’s very hard to tell the difference between an H color diamond and a diamond with a color grade that’s in the colorless range. 

To illustrate this point, try for yourself. On the left side of the image below is this 1.06 carat, VS2 clarity, H color round brilliant cut diamond from James Allen. To its right is this diamond from James Allen, which is almost equal in size, clarity and cut but with a D color grade:

D/H color diamond comparison

As you can see, even under bright lighting and at 20x magnification, it’s very difficult to see any difference in color between these two diamonds.

Now, imagine trying to spot the difference between the diamond on the left and the diamond on the right in natural light, without magnification and with the diamond set in a ring that’s worn on your fiancé-to-be’s finger. 

Viewed from the side, the difference in color between the two diamonds becomes slightly more visible. However, it’s still very subtle even with bright lighting and magnification:

D/H color side diamond comparison

What isn’t subtle is the difference in price between these diamonds. The D color diamond from James Allen costs $6,260. The H color diamond costs $5,480 — slightly over 14% less. 

One reason that the difference in color between these two diamonds is so subtle is the cut. Both of these diamonds use the round brilliant cut, which is excellent at reducing the visible color of a diamond because of its pattern of light-reflecting facets. 

In other cuts, the yellow tint of an H color diamond is more obvious. Below, we’ve compared this 1.05 carat, VS2 clarity, H color marquise cut diamond from James Allen to another marquise diamond of a similar size with a D color grade:

As you can see, the difference in color is more visible this time, at least with the help of lighting and 20x magnification. 

H Color Diamond Pricing

Just like cut quality and clarity, a diamond’s color grade can have a significant impact on how much it costs to purchase. 

In the right cut, an H color diamond can offer outstanding value for money. For example, the H color round cut diamond from James Allen we featured in the comparison above costs almost $800 less than an equally large, clear and well-cut diamond with a D color grade.

By buying this diamond instead of a colorless diamond with a D, E or F color grade, you’ll have almost $800 extra that you can put towards a beautiful setting. 

In shapes other than the round brilliant cut, the pricing difference between a D, E or F diamond and an H color diamond can be even bigger.

For example, this 1.01 carat, VS2 clarity, ideal cut, D color princess cut diamond from James Allen costs $4,660. This princess cut diamond from James Allen has the same clarity, cut quality and carat weight with an H color grade. It’s available for $3,360 — a difference of $1,300, or about 28%. 

In general, you can expect to pay anywhere from 15% to 30% less for an H color diamond than you would for a diamond with a D color grade.

    Ringo™ Approved Eye Clean Diamonds

  • Blue Nile
  • Blue Nile
  • Blue Nile
Load More

When is it a Good Idea to Buy an H Color Diamond?

If you’ve read our full guide to diamond color, you may have noticed that we recommend the H color grade quite often. 

H color diamonds offer a fantastic combination of aesthetics and value for money. Since they’re in the near-colorless range of the diamond color scale, they almost always look colorless when they’re set in a ring. At the same time, they’re significantly cheaper than D, E or F diamonds. 

Overall, we think that the H color grade is an excellent choice for most diamonds. However, as with all color grades, there are situations where a diamond with a higher or lower color grade is a better choice.

Below, we’ve listed our color recommendations for round diamonds, as well as other diamonds shapes. We’ve also explained how the setting you choose can affect the look of an H diamond and the value for money it offers.


Think You’re A Diamond Pro?

These diamonds look identical in a ring.
Real Diamond Pros will know how to save over 25%
So Which is it?
The J color at $4082
or the G color at $5500
Choose the diamond you like better and see if you are a Pro!

For Round Diamonds

For round diamonds, the H color is a great choice. The round brilliant cut does a fantastic job of reflecting light, making it extremely difficult to see any difference in color between an H diamond and a colorless diamond even under heavy magnification.

In fact, we think the H color grade is the highest you should go on the color scale when buying a round diamond. If you choose a more expensive diamond with a grade higher than H, you’ll pay for a feature that you won’t ever be able to notice or appreciate.

As you may know, the metal you choose for your fiancé-to-be’s engagement ring can affect the appearance of the diamond. White metals, such as white gold and platinum, make color easier to see, while metals like yellow and rose gold can make clear diamonds look more yellow. 

We feel comfortable recommending the H color grade for round brilliant cut diamonds in metals such as platinum and white gold. Set in an engagement ring setting of any style, a well-cut H color diamond can look colorless and absolutely stunning. 

For colored metals such as yellow and rose gold, the H color grade is also fine. However, you’ll actually be better off choosing a lower color grade, such as a J color diamond, as the gold color of the metal will make any diamond appear slightly yellow anyway. 

For Other Diamond Shapes

The H color grade is a good choice for most diamond shapes. However, there are a few shapes that show color more readily than others, meaning you may want to choose a better color grade if you’re shopping for a diamond in one of these shapes. We’ve covered all of these below.

For the Asscher, princess and emerald cuts, an H color diamond is absolutely fine. Diamonds in these shapes don’t conceal color as well as the round brilliant cut, but they still reflect more than enough light to make an H color diamond look virtually identical to a colorless one. 

If you’re choosing a colored metal such as yellow or rose gold, you can even drop below the H color grade and choose an Asscher, princess or emerald cut diamond in the J grade. 

For other diamond shapes set in white metal, H is the lowest color grade we feel comfortable recommending. For yellow and rose gold, the H color grade is absolutely fine, although you can safely drop down to the I to J range without much of a visual difference. 

H Color Diamonds and Side Stone, Halo and Pavé Settings

As well as the metal you choose for your setting, the type of setting design you choose has an impact on whether or not a diamond color is suitable.

For example, halo, pavé and side stone engagement rings all feature small diamonds set near or beside the center stone. To avoid the center stone looking overly dark or yellow, these small diamonds need to be close in color to the diamond you choose for the center stone.  

For example, this trellis halo diamond engagement ring from James Allen has small diamonds surrounding the center stone, as well as pavé diamonds. Because of the halo, it’s better to have an H or higher color center diamond to avoid any possible yellowness.

This is only an issue with halo settings. Side stone and pavé styles look amazing with an I color center. If you’re buying a solitaire setting, the center stone will be the only diamond in the ring, meaning there’s no need for you to worry about matching the color of the center diamond. 


For most diamonds, the H color grade is an excellent choice. A well-cut H color diamond looks colorless to the naked eye, all while costing anywhere from 15 to 30% less than a comparable diamond with a D color grade.

This means that you can save hundreds or thousands of dollars by picking an H color diamond over a colorless one, letting you choose a more beautiful setting or simply save money for your wedding, honeymoon or for your future together with your fiancé-to-be. 

In some cases, such as with a yellow or rose gold setting and a round brilliant cut diamond, you may be able to drop down to an I or J color grade without needing to worry about the diamond’s appearance. 

If you need help buying an H color diamond or choosing the right color grade, contact us. Our experts can help you choose the ideal diamond engagement ring for your tastes, preferences and budget.

About the author

Michael Fried

Michael Fried

Mike learned the diamond business from the ground-up at Leo Schachter Diamonds - one of the world's top diamond manufacturers. He has been recognized as a diamond industry expert by Time, People, Money, The Daily Mirror, NerdWallet, The Times Herald, Yahoo Finance Australia, The Art of Charm, The Washington Diplomat, The Next Web, and more.

Blue Nile Blue NileBlue Nile is the largest and most well known internet jewelry seller. They have a very large exclusive online inventory. Their high quality images are catching up to James Allens' and their prices are amazing. Blue Nile have generously offered our readers an exclusive one-time use coupon. (Click Here to save %15 off engagement ring settings)

Click to Visit

What we love about them:

  • No questions asked returns within 30 days of shipment. Blue Nile will send you a paid shipping label to return the ring.
  • Lifetime Warranty
  • Free Shipping
  • Free prong tightening, repolishing, rhodium plating and cleaning every 6 months
  • Provide insurance appraisal
  • One free resizing within the first year of purchase
  • High quality images of about half of their diamonds
  • 24/7 Customer Service
  • 100% credit towards future upgrades (must be at least double in value)
  • Best in class fulfillment
Arrow down
Arrow up

James Allen James AllenJames Allen is the leader in online diamond sales. Their imaging technology is the same as inspecting a diamond with a jeweler's loupe. They have the largest exclusive loose diamond inventory online and fantastic prices. They also have the nicest collection of lab created diamonds online. Save 10% off select Lab Grown Diamonds

Click to Visit

What we love about them:

  • No questions asked returns within 30 days of shipment. James Allen will send you a paid shipping label to return the ring.
  • Lifetime Warranty
  • Free International Shipping
  • Free prong tightening, repolishing, rhodium plating and cleaning every 6 months
  • Provide insurance appraisals
  • One free resizing within 60 days of purchase
  • Free ring inscriptions
  • Best-in-class high quality imagery of all diamonds in stock
  • 24/7 Customer Service
  • Best-in-class packaging
Arrow down
Arrow up

Still afraid of getting ripped off?

Before you buy a diamond, get personal buying advice from industry veterans. We'll help you get the best diamond for the money.

Ask your diamond purchase question here

DISCLAIMER: We don't use your email for marketing. Period.

Sours: https://www.diamonds.pro/education/h-color-diamonds/
  1. I 10 wreck today
  2. Vacaville high schools
  3. Madeline mccain missing
  4. Best ryzen cpu reddit
  5. Tri valley masters swimming
H I Diamond Color

Just about every jewelry store that you go into, their diamonds have 1 main thing in common:

H-I color

A good portion of all the diamonds sold in the country have H-I diamond color.

Why? Because H-I is an average color, middle of the road, greatly abundant, and consistent color in nature.

Dead center

H-I color is dead center of the Near Colorless color chart (see picture). If you look at the diamond color grades designed by GIA, you’ll see Colorless is the top color range, and Near-Colorless is the next best color range.

Near-Colorless are the grades G, H, I and J. Near Colorless basically means there is a little off-color in the diamond (the best diamond color is Pure White, or no color). They have a little yellow hue that as you go further down the color chart gets stronger and more visibly yellow!

Yellow color

When you get into the L-M and beyond color ranges (they start at D and go through Z) you’ll definitely see a lot of yellow color in the diamond. And trust me when I say, P color is really pee color! Yellow color is NOT good! Brown isn’t particularly pleasant either. Yellow or brown colors in diamonds makes them look old, dirty, decayed and ugly!

White is the preferred diamond color to have. But most diamonds do not come in white. White diamonds are rare and command big price tags. The Near-Colorless range is better suited for the average consumer and an average price range.

That’s why H-I is so popular.

It’s common!
It’s not that everyone wants them, it’s just that most of the diamonds are in the Near-Colorless range. It’s so common in fact, that most people don’t even know that other diamond colors exist! Everywhere you go all you see are H-I colored diamonds, and if that’s all you see, that’s what you’ll get!

But I’m telling you, you shouldn’t settle for that. Just because most of the jewelers carry H-I color, doesn’t mean you are stuck with it. All it takes is for you to compare H-I color to either G color or even better; the Colorless range, which is D-E or F, and you’d be immediately impressed. The difference in color will open your eyes!

Keep looking

What I’m saying is, just because it’s the common color, and just because that’s what everyone is carrying, compare them! Find a jeweler that carries Colorless and see the difference yourself! Compare H-I to the better color grades. See for yourself what a better color and a better diamond does to beauty and sparkle! You won’t regret it!

You really will be surprised at how much color affects the beauty of a diamond. Color actually affects the beauty of a diamond MORE than clarity does (That’s because you’re dealing with tiny, microscopic inclusions). A color range of D, E, F, or G (All better color grades than H-I), will actually make your diamond look bigger, brighter, and sparkle more.

That extra brilliance is worth every penny!

Is H-I color a good color to buy?

Sure! It’s not bad. But then again, it’s not great. H-I diamonds do have a little tint or cast of yellow to them. Some people will notice it, others won’t. It may not be an issue for you. You’ll have to check them out to be sure. Every diamond is different. But I’d bet if you compared H-I to a diamond graded E or F in color, you’d change your mind in a heartbeat! It’s that stunning!

Colorless is awesome! Near-Colorless is okay!

If it were me, I’d go Colorless in a second. But if moving up to the highest color range is a strain on your wallet, then do the next best thing…

Buy G color

G color is at the top end of the Near-Colorless range, and it’ll make your diamond look bright and white! G is a great color and a great compromise. H-I is not bad

I would say it’s just so-so.

H-I is just like every other diamond out there on the market…

If that’s what you want!

Check out pure-white diamonds at James Allen!

Cheers! :)

Top Diamond Vendors:

James Allen

James Allen

James Allen is a leader in diamonds. Their real time interactive diamond inspection is the best in the industry. View and rotate any diamond under 20x magnification. Their prices, selection, lifetime warranty, 24/7 customer support and hassle free returns are unbeatable. Visit James Allen today.

James Allen


Blue Nile

Blue Nile

Blue Nile is the largest and most well known respected diamond dealer online. They are highly trusted, have a huge inventory, and low low prices (compare anywhere and see for yourself). If you want to save money, or build your own ring, this is the place to shop. Visit Blue Nile today.

Blue Nile

Sours: https://www.jewelry-secrets.com/Blog/is-h-i-color-a-good-diamond-color/

The Diamond Color Grading

Society has painted the quintessential diamond before our eyes. And the classic gem, if not icy-white, has no color. It is luminescent, transparent, and the non-pigment we perceive is actually the dance of light that makes diamonds so mesmerizing!

Diamond Color

So, what do we mean by Diamond Color if the perfect diamond should have no color? Nope, we’re not talking about fancy colored diamonds with evident flushes of the shades of the rainbow. They belong to a whole other spectrum. The thing is, white diamonds aren’t all faultlessly white.

In fact, most diamonds are born with a hint of yellow or brown. These shades go from color D to Z! In this post, we’re delving into these different color grades; how each category impacts the diamond’s sparkle, and which one will give you an icy-white diamond without going for the most expensive grade.

Diamond Color in a Nutshell


As one of the steerers of the Diamond 4Cs, color affects the diamond’s overall appearance. When light reflects into the diamond’s prismatic facets, it bounces to a range of hues we call “fire.” And if there’s noticeable color in a diamond, it won’t be able to reflect light as much as a colorless diamond can.

Ultimately, lower color grades will exhibit lesser transparency and scintillation compared to diamonds with no discernible color at all. Thus, the more colorless a diamond is, the better its light absorption and visible sparkle. For this reason, people usually go for colorless diamonds. But this doesn’t make diamonds with warmer colors less desirable.

The Diamond Color Grading System

Diamond Color Chart


Color grades range from D (colorless) to Z (yellow/light brown). Gemologists grade diamonds facing down on a white surface and controlled lighting as it’s hard to evaluate color when diamonds are viewed face up. Unlike the diamond cut where you should always opt for the best, the color of a diamond is a great place to save money!

Colorless Diamonds (D, E, and F)

Diamonds within the colorless range are the rarest ones. D and E-colored diamonds will display virtually no color. They are icy white!

F colored diamonds, on the other hand, display a nearly undetected amount of color, but only when viewed face down by a gemologist. Even I have never been able to distinguish a D and an F-colored diamond when they are not directly next to each other in the face-down position.

Diamonds in this category are best mounted in platinum or white gold since yellow gold and other colored settings will take away from the high luminosity of the color grades.


        • D colored diamonds
        • E colored diamonds
        • F colored diamonds

Near Colorless Diamonds (G, H, I and J)

Diamonds within the near colorless range appear colorless in the face-up position. However, when viewed face down, they exhibit a slight amount of body color. In order to see it, the diamond has to be viewed against a perfectly white background.

But once the diamond is mounted on a ring setting, the color will not be detectable by a layman. Therefore, near colorless diamonds are the best option for getting the biggest bang for your buck!


Faint Color Diamonds (K, L, and M)

K to M graded diamonds show a slight hint of color in the face-up position. They resonate with people who like the warmer look of faint color diamonds. This is a sure win for those who want to set their diamond in a yellow gold ring setting. And since diamonds pick up quite a lot of color from a yellow gold ring setting, it would not be wise to overspend on color.


        • K colored diamonds
        • L colored diamonds
        • M colored diamonds



Now, I wouldn’t recommend color grades N-R (Very Light Tint) and S-Z (Light Tint) due to strong yellow or brown tinting. Unless, of course, you prefer these deeper shades.

Diamonds Adapt Color from the Ring Setting

As mentioned earlier, most diamonds are bought to be mounted on a ring setting, and a diamond attached to the ring will invariably pick up some of the metal’s color!


        • Diamond in a Yellow Gold Ring Setting
        • Diamond in a White Gold Ring Setting

(Pictures are courtesy of James Allen)

Diamonds in yellow gold settings adapt more of the yellow gold hue compared to diamonds set in a white gold. For this reason, diamonds in yellow gold don’t have to have such a good color grade as you would choose for a diamond in a white gold ring.

Just have a look at these diamonds on yellow gold ring settings and these diamonds on white gold ring settings. It is quite apparent that diamonds in yellow gold ring settings absorb much more of the ring color. You can take advantage of this knowledge and save yourself some money!

Diamond Color for Fancy Shapes

Furthermore, the diamond shape will have an impact on the diamond color as the proportions and faceting patterns of various diamond shapes differ. For this reason, certain shapes are more prone to showing off their body color.

Diamond Color for Fancy Shapes

The round cut is the shape that’s least prone to showing off body color. Princess, emerald, and asscher cut diamonds are more likely to display some. So, it is advisable to choose one grade higher than what you would choose for a round cut diamond.

All the other diamond shapes especially the elongated ones like oval, marquise, and pear cut diamonds are even more prone to body color. In these shapes, color can be easily seen near the pointed tips. Thus, you would have to choose an even better grade!

During the years, I have concluded that these are the best color grades according to your diamond shape and the ring metal you will use:

Best color grades for your diamond

I guarantee that if you use the color grades above, untrained eyes will think that you bought a diamond with the highest color grade!

Diamond Color for Larger Diamonds

Carat Weight Simulator

You should also take note of color’s effect on big diamonds. Larger diamonds trap more body color compared to smaller diamonds. If you take a 0.5-carat diamond and a 3-carat diamond with the same color and directly compared them to each other, you’ll see that the smaller diamond is more colorless.

Also, if you buy an even larger diamond (from 2-carat upwards), you might consider getting a color grade better than you would normally have chosen – according to my “best bang for your buck color grade table” above.

Blue Fluorescence

Diamond Color Fluorescence

Another interesting fact is that some diamonds exhibit fluorescence. No matter what degree, it's always noted in the grading report.

If you don’t have much money to spend and want to buy a diamond in the I-K color range, you might consider buying a diamond with medium or strong blue fluorescence since they are usually sold at a discounted price.

Though please be aware that I do not recommend buying diamonds with fluorescence apart from diamonds in this particular color range. You can find more information about how it could help you boost a diamond within the I-K color range in my post about diamond fluorescence.

Price Differences Between Different Color Grades

The best thing about choosing a diamond color with the table above is that you are not “wasting” money on a premium feature that you wouldn’t be able to appreciate with your bare eyes.

Of course, I am well aware that many people want to get the best diamond color because this is supposedly a matter of honor. And this is absolutely fine. I just want to let you know that you can maximize your budget if you want to.

Diamond color price relation chart

Now, all the other 3Cs being equal, you can clearly see that the D color is priced at a large premium because it is rare. Though a diamond with an H color set in a ring setting will appear completely colorless, too. And will save you a lot of money!

Which Diamond Color Grade Should You Choose?


The most popular color grade is G, but this doesn't mean that you can only choose this grade to get the biggest bang for your buck. What's more vital is never to choose a color grade better than G!

The reason is quite simply that as a typical customer, you would most likely not see a difference between a G and a D color if they were held next to each other. You would end up paying way more for an invisible feature, apart from the color grade you will see on your diamond certificate.

On the pictures below, you can see two different diamonds. The one on the left is a D-colored diamond, and on the right is a G-colored diamond. Both exhibit their face-up and back views:

        • D colored diamond viewed from front and back
        • G colored diamond viewed from front and back

Now, I guess that you can see a difference between both diamonds in terms of color. But you have to consider that you can only see it because both diamonds are shown in 10x magnification, and are directly compared. Furthermore, you are comparing loose diamonds to each other!

Without this comparison, the G-colored diamond would appear to be completely colorless. Even diamond grading experts from GIA and AGS who are grading diamonds all day long can only estimate the color by comparing the diamond to a set of master diamonds.

This is done under the best lighting conditions. I know from experience that many people would consider an I or even a J-colored diamond as colorless if they weren’t able to inspect it next to a D-colored diamond!

The Takeaway

Diamond Color

The best color grade will largely depend on what kind of diamond and ring metal you intend to use. I want you to get the biggest bang for your buck which means you get a diamond that looks completely colorless, but in reality, does not have a D color grade. And you’ll find this from G and below!

But then again, color is subjective, and you have the final say in this. Whether you’re a diamond purist who's ever-enamored with the gem’s translucence, or you belong to cultures that see warmer tones as more amusing, you’ll have a wide selection of shades to choose from.

Should you have any question about diamond color, please feel free to leave a comment below or email me! My advice is free. 🙂


About Your Diamond Teacher Sebastian

Sebastian Naturski loves to write about diamonds and share his knowledge with his readers.
When he is not working on his website he is studying law at Humboldt University of Berlin.
He has taken part in several international law competitions and likes to broaden his horizons.
His other big passion are languages. He is fluent in German, English, Polish and Japanese and got basic skills in French and Spanish as well.

Sours: https://yourdiamondteacher.com/diamond-4cs/color/

Color h1 diamond

Diamond Color

By Robert Underhill

Diamond Color Grading

Diamond ColorContrary to how it sounds, diamond color is determined by the absence of color. The less color present in the diamond the more color is returned. Perhaps the easiest way to imagine this is to envision the triangular prism we looked at in science class. When the prism was put in sunlight, a rainbow of color was displayed. Likewise, a colorless diamond will flash a dazzling spectrum of color.

The highest color grade for a diamond is “D”. “D” color diamonds are very rare and not commonly found in traditional jewelry. Most diamonds used in jewelry have a slight presence of color.

It is possible for diamonds to have a very high concentration of desirable color. These diamonds are known as Fancy and can be found in a wide variety of colors including yellow, green, pink, blue and the rarest of all, red.

Diamond color rating is the one aspect of diamond grading that is done exclusively with the naked eye. Using a sterile colorless light box, gemologists grade the color of a diamond by comparing the stone to other stones in a master set of diamonds of known qualities. For example: if a stone is to be graded G, it is compared to an F, a G and an H color diamond to find the stone it most closely resembles.

Since diamond colors are graded by the unaided eye, it stands to reason that color is one of the primary concerns you should have when buying a diamond. It is a lot easier to forgive a diamond clarity grade with inclusion that is only visible under magnification than it is to forgive a brown or yellow stone.

Diamond Color D

D color diamonds are the benchmark for quality. They are very rare and collectible. When cut well, they are clearly the most beautiful diamond you can own. The larger the D colored diamond, the more expensive it is, making it a bit prohibitive for them to be used in all but the most exclusive jewelry.

Diamond Color E

If you are able to afford a stone with the diamond color E, you will never regret it. So close in appearance to absolutely colorless, most people would love to own one. If you want the best but diamond pricing makes a D just out of reach, E color diamonds can trade at significantly lower prices than their “D” counterparts.

Diamond Color F

All F color diamonds will appear colorless unless they are viewed as loose diamonds alongside of a D or E. There is no question that any fine jewelry set with F color diamonds is exceptional and well above average.

Diamond Color G

For most people seeking a high gem color diamond, G is the benchmark for quality. The stones are pleasing and white, and generally exceed the standards of most diamonds used in the traditional fine jewelry marketplace.

H-I Color Diamonds

Diamonds in the H-I color range are highly sought-after in fine jewelry. When the diamond cut grade is high, H-I diamonds perform like colorless stones. H-I color diamonds mark the breaking point for near colorless performance in diamonds and are highly respected in the fine jewelry world.

J-K Color Diamonds

J-K colors mark the top end of commercial jewelry. They are affordable and provide a ‘big look’ with in the slight yellow and top light brown categories. They afford a significant reduction in price from the gem colors of D through I and are used extensively in the mid-range jewelry market place.

L and Lower Diamond Colors

Stones that are colors L and lower cannot be disguised. Yellow and brown are obvious in this material especially when compared to fine jewelry. Used for commercial and low end jewelry they account for the majority of diamonds used in today’s jewelry.

Sours: https://jewelrydesigns.com/diamonds/diamond-color/

Fans of hanging and asphyxiation of any kind only for members of this closed club, blah blah blah someone looked through the Internet, and most of them were in the hall live. The club had more than three thousand active members around the world, rules for entry fees and so on.

In general, nothing particularly interesting.

You will also like:

Lyudochka was all leaking. A drop swept across the brown circle of his anus. Not so much not caring about whether Ruslan sees it, and, obeying only one desire - to bring our woman to orgasm. I slid my finger along the anus. Then again.

2958 2959 2960 2961 2962