NXDN is an open standard for public land mobile radio systems, that is systems of two way radios (transceivers) for bidirectional person-to-person voice communication. It was developed jointly by Icom Incorporated and Kenwood Corporation. It is an advanced digital system using FSK modulation that supports encrypted transmission and data as well as voice transmission. Like other land mobile systems, NXDN systems use the VHF and UHF frequency bands. It is also used as a niche mode in amateur radio.
NXDN is implemented by Icom in their IDAS system  and by Kenwood as NEXEDGE; both Kenwood and Icom now offer dual-standard equipment which supports the European dPMR standard.
Icom and Kenwood began their collaboration in 2003. The NXDN protocol was announced in 2005, and NXDN-compatible products first appeared in 2006.
The NXDN Common Air Interface (CAI) was accepted at the Study Group 5 (SG5) meeting of the International Telecommunication Union Radiocommunications Sector (ITU-R) held in November 2016 and in report M.2014-3 published in February 2017 as an international digital land mobile system.
The NXDN protocol and the communications products in which it is used are intended for commercial Private Land Mobile Radio (PLMR)  and public safety communications systems. The technology satisfies the U.S. Federal Communications Commission (FCC) mandate requiring all communications systems covered by Part 90 regulations to use narrowband technology by January 1, 2013. Part 90 regulations specify a bandwidth of 12.5 kHz, but the FCC “strongly urges licensees to consider migrating directly to 6.25 kHz technology rather than first adopting 12.5 kHz technology and later migrating to 6.25 kHz technology.” The FCC “will expeditiously establish a schedule for transition to 6.25 kHz narrowband technology.” 
NXDN uses Frequency-Division, Multiple-Access (FDMA) technology in which different communication streams are separated by frequency and run concurrently. Time-Division, Multiple-Access (TDMA) systems combine the communications streams into a single stream in which information from the different streams is transmitted in interleaved time allocations or "slots." Code-Division, Multiple-Access (CDMA) systems allow many users to share a common spectrum allocation by using spread-spectrum techniques.
The basic NXDN channel is digital and can be either 12.5 kHz or 6.25 kHz wide. 6.25 kHz dual-channel systems can be configured to fit within a 12.5 kHz channel. This effectively doubles the spectrum efficiency compared to an analog FM system occupying a 12.5 kHz channel. The architecture of NXDN is such that two NXDN channels, within a 12.5 kHz channel for example, can be allocated as voice/voice, voice/data, or data/data. As of 2012, this capability cannot be implemented in commercially available hardware on simplex or "talkaround" frequencies, but only through repeaters.
Systems that use NXDN also support mixed analog FM and digital NXDN equipment, including direct radio-to-radio communications. This allows system owners to migrate to a narrowband, digital system without replacing the entire system at once. NXDN equipment is currently FCC type-accepted for use on VHF (137-174 MHz) and UHF (406-512 MHz) bands.
Data is transmitted using 4-level frequency-shift keying (FSK) modulation. NXDN uses the AMBE+2 vocoder (codec) for digital audio. This combination provides better weak-signal voice quality than for analog FM. For an equivalent transmitter power, NXDN is represented as having a wider range and slightly better multi-path characteristics than analog FM in typical RF environments, specifically at the 12 dB SINAD threshold. The transmission bit rate is 4,800 bit/s.
The following FCC emission designators apply to NXDN transmissions:
- 8K30F1E 12.5 kHz single channel digital voice
- 8K30F1D 12.5 kHz single channel digital data
- 8K30F1W 12.5 kHz single channel digital voice and data
- 4K00F1E 6.25 kHz single channel digital voice
- 4K00F1D 6.25 kHz single channel digital data
- 4K00F1W 6.25 kHz single channel digital voice and data
- 4K00F2D 6.25 kHz single channel analog CW ID
The NXDN protocol provides support for the following functions. Implementation of the functions and the user-level interfaces by which they are accessed and used may vary by manufacturer.
In all lossy compression schemes, trade-offs are made in voice reproduction quality in return for minimizing the raw bit rate of the transmission. This leads to artifacts and compromises of frequency response in reproduced speech. Encoders and other compression schemes that are highly optimized for speech are often unsuitable for non-speech audio, such as music or frequency-shift keyed data. Using an inappropriate encoder usually results in the creation of distortion and artifacts in the reproduced audio.
The audio reproduction quality of IDAS and NEXEDGE communications systems is dependent on the performance of the AMBE+2 voice codec used by NXDN. The AMBE family of vocoders has been subjected to comparative testing and found to be adequate for its intended uses, primarily mobile and aeronautical radio. The AMBE+2 vocoder has also been selected for use in the Motorola MOTOTRBO radio family as well as Hytera's DMR systems, and the Project 25 (P25) mobile radio system. The following reports and papers are descriptions of laboratory-environment evaluations of AMBE+2 and other speech vocoders.
Compromises in audio quality are inherent in the use of any codebook-based speech coder, particularly when used in conditions of high background noise. Incremental improvements are being made in the algorithms, which may lead to differences in performance even while the basic method remains unchanged. In the US, the Department of Commerce Public Safety Communications Research laboratory regularly reports on progress in this field. While their work specifically pertains to Project 25 radios, it is directly applicable to any system using similar multi-band excitation coders.
The NXDN Forum was formed in order to promote the NXDN protocol in North and South America. The forum's members are:
The NXDN (Next Generation Digital Narrowband) common air interface protocol, which was developed jointly by ICOM and Kenwood, uses Frequency Division Multiple Access (FDMA), employing a 4-level FSK modulation scheme. These companies and others together form the NXDN Forum.
Kenwood's brand for NXDN equipment is "NEXEDGE", while Icom's brand for NXDN equipment is "IDAS", or Icom Digital Advanced System.
Who are the Users?
- Click on the NDXN category at the bottom of this page, and select the various regions to see if there are listings in this wiki. More information might be found in the trunking tab of your state in the RR Database.
- You can use the Digital Frequency NXDN Search webtool to search by county for frequencies authorized to use NXDN (information extracted from the FCC database)
- The Digital Frequency Quick Import webtool can also be used to import frequencies into several modern scanners.
Can it be Decoded?
Apart from using an actual Kenwood or Icom radio, the following methods are possible;
- Radios with no trunking support
- AOR AR5700D
- AOR DV1Note: 6.25 khz NXDN4800 only
- AOR DV10
- Icom IC-R30Note: Can decode encrypted audio if the key is known
- Icom IC-R8600Note: Can decode encrypted audio if the key is known
Related Wiki Pages
- RadioReference Forums
- Scanner School Links
- Honesdale national bank
- Kwikset smartkey tool home depot
- Legrand outdoor power pedestal
- Google it specialist salary
NXDN™ is a proprietary narrowband digital protocol developed by ICOM Inc. and JVC KENVOOD Co. to provide a low complexity digital radio protocol solution which satisfies the FCC narrowbanding mandate.
Digital voice and data system
EHR (Enhanced Half Rate) 3600 bps; EFR (Enhanced Full Rate) 7200 bps
4800 bps/9600 bps
6.25 kHz/12.5 kHz
Digital Scrambling, Encryption, Trunking Mode
The modulation type enables manufacturers to use existing analog FM designs with the addition of extra components for digital capability. This provides backwards compatibility with the analog systems and reduces the complexity of development.
To use the mode set Offset to the IF output of the receiver. The current version implements the decoding of voice and data. When a call occurs, some status messages are displayed in the text output. Data transmissions are displayed as a hex dump of the decoded data. The parameter Confidence shows the demodulation quality.
Decoded voice will be saved in a “.wav” file in the default Data-Output directory. Use the Mute button to mute or un-mute live voice output to the speaker. The input bits to the vocoder are saved in Hex in a separate file alongside the .wav file. This feature is useful when the voice session is encrypted. The user can analyze and try to decrypt the bits.
When a call is encrypted, the voice output is muted, but status messages are displayed. When encrypted data is received, it is shown on the screen in encrypted form. Usually, it is shown in red, because the data checksum can not be verified with encrypted data.
On full revelations, at some moments I realized that I did not know anything about her, but it seemed as if it was not important. Massage your anus a little. You will get a wild buzz. " I started massaging the anus and jerking off my penis.
How happy they were in the morning. Aigulka was generally glowing. Are you sorry if she looks at you to surrender herself to her husband more fiercely.sdrsharp dsd nxdn decode
Katya sat down next to Arthur, I took a seat behind them near the window. To my delight, Yulka sat down next to me, and Lyokha - in an empty seat across the aisle. On the way, we gradually struck up a casual conversation with my new friend. In truth, it can be quite difficult for me to quickly find a common language with a stranger, and even more so with a girl.
You will also like:
- Horvath funeral home
- 9999 in hex
- Bad company lyrics
- Tiffin movie theater
- High country silverado
- May ranch doodles
- Vintage milk glass chicken
- Outdoor glider rocker cushions
Floor and helped Lika. My head was buzzing. There was a click again from the side. Lika turned to me. I wanted to say something, but then I looked into her veiled eyes.