Iphone se stopped working

Iphone se stopped working DEFAULT

If your iPhone won't turn on or is frozen

If your iPhone has a frozen screen, doesn't respond when you touch it, or becomes stuck when you turn it on, learn what to do.

If your iPhone turns on but gets stuck during start up

If you see the Apple logo or a red or blue screen during startup, try these steps:

  1. Connect your iPhone to a computer. On a Mac with macOS Catalina, open the Finder. On a Mac with macOS Mojave or earlier, or on a PC, open iTunes. Find out which macOS your Mac is using.
  2. Select your iPhone on your computer.
  3. While your iPhone is connected, follow these steps:
    • On your iPhone 8 or later, including iPhone SE (2nd generation): Press and quickly release the volume up button. Press and quickly release the volume down button. Then press and hold the side button.

      An animation of an iPhone with arrows pointing to the volume up button, then to the volume down button, and then to the side button.
    • On your iPhone 7 or iPhone 7 Plus: Press and hold the side button and volume down button at the same time.
      An iPhone with arrows pointing to the volume down button and the side button.
    • On your iPhone 6s or earlier, including iPhone SE (1st generation): Press and hold both the Home button and the side button or the top button at the same time.
  4. Keep holding the buttons until you see the recovery mode screen.
    An iPhone showing the recovery mode screen.
  5. When you get the option to restore or update, choose Update.
    A Finder window showing a prompt with the choice to update or restore your iPhone. Update is selected.
  6. Your computer will download the software for your device. If it takes more than 15 minutes, your device will exit recovery mode. Repeat steps 2-4.

Published Date: 

Sours: https://support.apple.com/en-us/HT201412

iPhone SE 2020 Not Booting Up or Turning On? Fix

Your iPhone SE 2020 is working all fine and one day it just shuts down unexpectedly and stops booting after that? There can be a number of reasons why your iPhone SE 2020 won’t turn on. If your iPhone SE 2020 does not turn on, here’s what you should do.

There can be a multitude of factors that could have led to your iPhone SE 2020 shutting down abruptly and not booting thereafter. If The device is old, the battery could be the cause. Similarly, if you spilled liquid on your device then it could be the reason behind the iPhone SE 2020 not turning on anymore. I have also seen iPhone SE 2020 that have suddenly stopped booting for no clear reason whatsoever. Whatever the reason might be, below are some solutions to help you restart your iPhone SE 2020 if it won’t turn on or boot up.

What to Do When Your iPhone SE 2020 Won’t Turn On or Boot Up

1. Connect iPhone to PC

It is possible that you can be stuck in a situation where your iPhone SE 2020 has a faulty power button and it shuts down unexpectedly. In such cases, you can try to connect your iPhone to a PC and wait for a few seconds or minutes for it to boot. In most cases, if your iPhone has enough charge, it should boot automatically into iOS. If not, try the step mentioned below.

This is also a good way of knowing if your iPhone is actually dead or if its display has just stopped working. If its the latter, the device will still be detected by your PC.

2. Force Restart iPhone

If your iPhone SE 2020 is not booting even after pressing the power button, you can try force restarting it to see if that helps.

Press the Volume up button followed by the Volume down button and then quickly press and hold the Side button until you see the Apple logo to force restart your iPhone SE 2020.

3. Charge It!

Ok, this is a simple one. If your iPhone SE 2020 has suddenly stopped booting and the above measures were in vain, you should put your device on charge. Do not try to immediately boot it after putting it on charge. Instead, allow it to charge for at least 10-15 minutes and then try to power it on. If your iPhone it’s relatively old with a weak battery, it is possible that the battery is no longer capable of holding a charge after a certain threshold. In case your iPhone SE 2020 boots after being on charge for around 20-30 minutes, it is recommended you get its battery replaced since it can no longer hold a charge properly.

Alternatively, if your iPhone SE 2020 shuts down unexpectedly while being charged, you should remove it from the charger and let it idle for a few minutes and then try booting it again.

4. Dry Out Your Wet iPhone

If your iPhone SE 2020 does not turn on after a liquid spill or after falling in a bucket of water, your only choice is to put it in a bag of rice or in a box filled with silica gel packets for a few hours to drain all the moisture. Recent iPhones are IP67/8 certified meaning they are dust and water-resistant to a certain extent. However, older iPhones do not carry any such rating and any kind of liquid spill can be damaging for them. As a precautionary measure, your iPhone will automatically shut down in case of a major liquid spill. In such cases, instead of trying to boot your iPhone again and again, you should put it in a bag of rice or in a bag with silica gel for a few hours so that it absorbs all the moisture. Do this after drying your iPhone using a cloth though.

Another option is to blow it dry using a hairdryer. You should also try getting all water out from the ports of the iPhone before putting it on charge otherwise the device could malfunction. You should then try booting your iPhone again and if that does not work, your only option is to take it to your nearest repair shop.

5. Take It to Service Center

If iPhone SE 2020 will not start up even after following the above steps, the only option you now have left is to take it to your nearest Apple service center. If your device is in warranty, you can take it to an Apple store or an authorized Apple service center to get it repaired. Since the device will be in warranty, Apple will repair or replace it for free.

If your iPhone SE 2020 is not in warranty though, I will recommend that you take it to a third-party service center first as they can likely repair your iPhone at a far lower price than Apple. However, do this only if there’s a reputed third-party repair shop for Apple products in your area. Otherwise, if you don’t mind spending some additional money for peace of mind, authorized Apple service centers are still going to be your best bet.

If any of the above methods help in bringing your dead iPhone SE 2020 back to life, do drop a comment and let us know about it!

Sours: https://iphonegeeks.com/iphone-se-2020-not-booting-up-or-turning-on-fix/
  1. Magazine file holder
  2. Azure machine learning github
  3. Easy pirate cake ideas
  4. Kiss love gun youtube
  5. Rizzo from grease outfits

10 annoying iPhone SE problems and how to fix them

iPhone SE
The iPhone SE takes the power of the iPhone 6S and places it into a smaller, more compact body that’s reminiscent of the iPhone 5. Despite merging an older design with newer hardware, the SE is a competent smartphone, and a great entry point for those new — or returning — to Apple’s iOS. Find out what it can do with our bite-sized iPhone SE tips and tricks. However, not everyone has had a frustration-free experience with their device. Here are some common problems SE users have reported having, and the various workarounds and fixes for them.

Problems with iTunes connection, battery, yellow screen, and more

Problem: Won’t connect to iTunes

Some iPhone SE owners have reported being unable to connect to iTunes with the smartphone, or that iTunes doesn’t recognize it. Users are getting the message, “The iPhone cannot be used because it requires a newer version of iTunes. Go to www.itunes.com to download the latest version of iTunes.” This was first reported on last April, and haspersisted until now.

Potential solutions:

  • Make sure you’re using the latest version of iTunes: 12.5.5 at the time of writing. Apple added sync support for the iPhone SE and iPad Pro starting with iTunes version 12.5.4. Windows users need to have Windows 7 or later to use the latest version of iTunes, while Mac users need to have OS X version 10.8.5 or later.
  • If the problem persists after updating iTunes, Apple has a helpful guide explaining what to do in the event that iTunes doesn’t recognize your iOS device.
  • If neither of the above options resolve the issue, you may have to reset your iPhone SE to its factory settings, meaning you’ll have to re-sync the device and all of your data. Make sure you back up everything on your iPhone first, then go to Settings > General > Reset > Erase All Content and Settings and see if that helps.
  • Your final option is to contact Apple directly to see if they have any other solutions.

Issue: Battery drain

Many iPhone SE owners have found that their batteries are draining quicker than expected, or they’re simply disappointed by how long the battery lasts.

Potential solutions:

  • Look at your Battery Usage to see which apps are draining your power the most in Settings > Battery. Change your settings for apps that are the biggest culprits, such as apps working in the background. Tapping on Battery Usage will reveal how long apps have been used and how long they’ve been active in the background.
  • Consider enabling Low Power Mode in Settings > Battery. It turns off certain features like mail fetch, background app refresh, and automatic downloads. Tap Settings > General > Background App Refresh if you only want to adjust the app refresh settings.
  • Location Services uses GPS and Bluetooth to determine your approximate location. If you don’t need this, toggle it off by going to Settings > Privacy.
  • Back up precious files and reset your iPhone SE to its factory settings, then set it up like a new phone without restoring via a backup. If battery life is better, restore using your backup. If the problem comes back, you may need to forgo using that backup or delete third-party apps.
  • Take a look at these additional tips for saving/extending battery life.
  • If none of the aforementioned suggestions resolve the issue, contact Apple Support, go to an Apple Store, or visit an Apple Authorized Service Provider to seek a replacement phone or repair.

Issue: Yellow screen

Some users noticed that their iPhone SE displays are slightly yellower than other iPhone models, instead of the usual white. In other cases, the yellow tint is only around the edges of the display.

Potential solutions:

  • Check your Night Shift settings in Settings > Display & Brightness > Night Shift, to see if the feature has been enabled. The recently implemented feature changes the color of the display to give it a warmer hue once the sun goes down. Messing with the color temperature slider at the bottom may do away with the yellowing, or could be the cause.
  • Older iPhone models such as the iPhone 5 had a similar problem that people reported running into. In most cases, it was a matter of the adhesive used for the digitizer during the phone’s production, and while it was drying, it would produce the yellow tint. If the iPhone SE problem is anything like the iPhone 5 problem, then the glue should dry within a week, thereby doing away with the yellow color.
  • If the yellowing persists after following the potential solutions outlined above, contact Apple or your carrier, or schedule an appointment with an Apple Authorized Service Provider to either get the phone repaired or replaced.

Problem: Voice Control activates on its own

Some iPhone SE owners on the Apple Discussion forums are saying voice control activates on its own, and at seemingly random times, prompting some to want to disable it. The problem occurs the most while listening to music or internet radio. Note: Voice control is not the same thing as Siri. In fact, if you’re using Siri, you can’t use voice control.

Potential solutions:

  • You can turn off voice control. You first need to set a passcode. Following that, go to Settings > Touch ID & Passcode > Voice Dial and toggle Voice Dial off.
  • Consider switching to Siri. Go to Settings > General > Siri and tap the Siri toggle to turn the assistant on. While on this screen, you can also turn on “Hey Siri” if you haven’t already, which will allow you to use Siri without pressing the Home button.
  • If you’re set on using voice control, a factory reset may be your final solution, aside from taking it to an Apple Store or affiliate retailer to get a replacement. First, back up everything on your iPhone SE, and then restore it to its factory settings.

Problem: Clicking noise coming from Home button

This is not the sound the Home button usually makes when being pressed, but rather a more audible sound that can be heard when the button rises after being pushed down. For some, the sounds vary, and may even sound like rattling.

Potential solutions:

  • Clean the area around the Home button. It’s possible a sticky substance or a smaller object found its way into the iPhone and is causing the noise.
  • It’s far more likely that this is a hardware issue that may require the device to be opened up and inspected. In that case, reach out to Apple Support, make a trip to an Apple Store, or seek out an Apple Authorized Service Provider to repair or replace your iPhone.

Problems with vibrate, iTunes sync, contact images, and more

Annoyance: iPhone SE won’t stop vibrating

A small number of iPhone SE owners have reported that their phone vibrates constantly, regardless of setting preferences. Turning off Vibration (Settings > General > Accessibility > Vibration) and performing a forced restart has not fixed the issue.

Potential solutions:

  • An app running in the background could be causing the issue. Bring up the app switcher — double-click the Home button — and swipe up to close any apps that are still running.
  • If you’re not using iOS 10.2.1, or any recent version of iOS 10, try updating your software to see if it fixes the problem.
  • You can try restoring your phone from a backup made before the vibration issue started. If the problem doesn’t occur after you restore the backup, an app or update could’ve been behind the issue.
  • Perform a factory reset and restore your phone, or set it up like a new device.
  • Reach out to Apple Support. You phone may need repairs, or a replacement headset.

Problem: iTunes won’t sync photos with iPhone SE

A few iPhone SE owners have recently run into an issue in which iTunes fails to sync photos with their iPhone. The desktop app informs users that it “cannot sync photos to the ‘iPhone SE’ because your Photos Library is not yet available. Please try again later.”

Temporary solutions:

  • Uninstalling and reinstalling iTunes has been said to work for a while. Sadly, the problem can come right back. Be sure to make a backup of your library before uninstalling the program.


  • It’s not ideal, but you can always manually add photos to your phone, just as you would music or videos.

Potential solutions:

  • Restart both your phone and your computer, then try syncing again.
  • Make sure you’re using the latest versions of iOS and iTunes.
  • This Apple Support page has a list of steps that may help.
  • While your iPhone is connected to iTunes, go to Photos > General and ensure your Photo Library is set to be your system photo library. If it isn’t, click Use as system photo library. This Apple Support page may be of some use, too, if you’re a Mac user.

Glitch: Missing contact images

Another recently reported problem is that some iPhone SE owners no longer have contact photos. These usually appear at the top of the page when you’re looking at a conversation with a contact. For many, the loss of images occurred after updating to iOS 10.2.1.

Potential solutions:

  • Restart your phone.
  • Make sure none of the images used for your contacts have been deleted by accident.
  • Try removing the contact image and re-adding it.
  • Go to Settings > Messages and toggle on Show Contact Photos.
  • If you’re using Display Zoom, the feature will automatically remove any contact images. Switch back to standard view by going to Settings > Display & Brightness. Then, scroll down to Display Zoom > View > Standard.
  • You can always try performing a factory reset, then restoring your phone from a backup.

Issue: Wi-Fi turns off when phone is locked

This is different from the typical Wi-Fi issue most people run into, in which their phone suffers from poor or nonexistent connectivity. Instead, a few people have experienced a problem that causes Wi-Fi to turn off when the SE is locked or put to sleep.

Potential solutions:

  • Restart your phone and router.
  • Go to Settings > General > Reset > Reset Network Settings. Afterward, re-connect to your Wi-Fi network.
  • One user on the iMore forums noticed they were having a similar problem when they got a new router that was using the same network password and login code to connect to their new modem. They suggested that a similar scenario could be confusing the SE. To fix the issue, they changed their aforementioned passwords and codes.
  • Try performing a factory reset.

Annoyance: Camera doesn’t preserve camera app settings

The iPhone’s camera app is capable of saving the last camera mode you used, but some users have noticed that this continues to happen, even if you’ve set the app to reset to the default camera mode (Photo) when you launch the app.

Official solution:

  • The camera app will revert to the default camera mode after about a minute. If you continue to adjust the app’s Preserve Settings during that time (Settings > Photos & Camera > Preserve Settings), it will not automatically reset.

This article was originally published on December 25, 2016, and updated on March 16 by Kyree Leary to include problems related to iTunes, the camera app, contact images, and Wi-Fi.

Editors' Recommendations

Sours: https://www.digitaltrends.com/mobile/iphone-se-problems/

Question:Q:My iPhone SE stopped working

Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.


I was just sitting there with my friend when all of the sudden my home button and power button stopped working. I was stuck on my iMessage. Then all the sudden my phone turned off and continuously went to the apple logo then back off. Over and over again. I haven't fixed it yet and I've tried everything. What do I do?

Posted on Apr 8, 2017 11:35 PM



Follow the steps in the link below:

iPhone won't turn on

Let us know if you get it working.

Posted on Apr 9, 2017 6:56 PM

View answer in context

Page content loaded

Apr 9, 2017 11:44 PM in response to Laughingmadds In response to Laughingmadds


Try a reboot press the power button down & menu button hold both down until you see apple logo this can take 30 seconds.



Apr 9, 2017 11:44 PM

User profile for user: Laughingmadds Laughingmadds

Question:Q:My iPhone SE stopped working

Sours: https://discussions.apple.com/thread/7917822

Stopped working se iphone

iPhone SE Troubleshooting

Oh no! Your iPhone's glass did not survive your unintentional drop test!

Take a deep breath and see if your iPhone will turn on and operate normally. In most cases, the iPhone is still functional but now a cosmetic disaster. Unfortunately, the iPhone SE's front glass and LCD are fused together and must be replaced as one piece. To replace it, follow the iPhone SE display assembly replacement guide. You can purchase a new display assembly here.

Even after furious button mashing and screen smashing, your iPhone SE doesn't respond.

Sometimes all it takes is a restart for the iPhone to become responsive again. To restart your iPhone when it is unresponsive, press and hold the sleep/wake and home buttons until the Apple logo appears (~10 seconds).

It is possible for an iPhone to become unresponsive if the battery drops to an extremely low level. Plug the iPhone into your computer or wall charger and allow it to charge for at least 20 minutes before using it again.

Plugging in your iPhone SE does not bring it life.

Check the USB cable for damage and dirt, especially at the ends. Then try using the wall charger, as this will provide greater power input than the computer/USB.

Try using different chargers to see if you may have a problem with your charger or cord.

Inspect the Lightning connector at the bottom of the iPhone for dirt, lint, and damaged pins. Clean out the dock connector very carefully with a tooth pick or soft toothbrush. If the dock connector is broken, follow this guide to replace it. A new lightning connector can be purchased here.

You cannot get your beloved iPhone SE to turn on.

Plug your iPhone into your computer or wall adapter to charge. If it does not charge when connected to either of these, you probably have a dead battery or a bad charging port. Replace the battery with a partially charged one and see if it will turn on. If not, then it can be a power button or logic board issue. If it does turn on, plug it in and see if the charging indication comes on to rule out the charging port as the problem.

The button may have lost its click. If this is the case, plug the phone into the computer and let it charge, and see if that will get it to turn on.

It is possible that it appears nothing is happening because the display is bad. If the iPhone sounds like it is working properly but nothing is visible, it is possible the display is bad and must be replaced. Unfortunately, the LCD and glass panel are fused together, and must be replaced as one unit. An easy way to test this is to turn the phone on and listen for a sound. Also you can move the mute toggle switch back and forth to see if it vibrates. If it vibrates or you hear a sound but nothing displays on the screen, then the screen is most likely the problem. Try replacing the screen to see what happens.

If nothing else works, your logic board is probably bad and needs to be replaced. Alternatively, individual components on the logic board can be diagnosed and replaced if you have the requisite troubleshooting and microsoldering skills.

An error message appears as if you have connected an unsupported accessory to your iPhone.

Check the Lightning connector at the bottom of the iPhone for dirt, lint, and damaged pins. Clean out the dock connector very carefully with a tooth pick or soft toothbrush. High concentration isopropyl alcohol (at least 90%) and a cotton swab should be used to clean any debris that does not come off with a tooth pick or soft toothbrush. If the dock connector is broken, follow this guide to replace it.

After an iPhone has been submerged in a liquid, there may be some corrosion or debris on the logic board connections that cause this error message. Remove the logic board and clean all of the contacts with a soft nylon brush and high concentration isopropyl alcohol (at least 90%), or use an ultrasonic cleaner if available.

You have trouble connecting to a wireless network.

If your iPhone has been disassembled before, it's possible that finger oils were left on the grounding locations for the Wi-Fi or Bluetooth antennas. These oils will cause grounding issues for the antennas, which could lead to a weak signal or no connectivity at all. Be sure to clean all grounding points with an electronics cleaning solution (a little isopropyl alcohol and a lint-free cloth can also work) before reassembling your iPhone to prevent grounding issues.

Your iPhone SE turns on and appears to work—but when you plug in headphones or speakers, the audio doesn't play properly.

It's unlikely your headphones or speakers are bad, but it's worthwhile to eliminate these as the source of your problem at the beginning. Try your iPhone with another set of headphones or speakers just to make sure that the problem is with the iPhone.

The most likely cause of audio output problems on iPhone SE is a bad audio-out jack. If you have determined that the problem does not lie in your external speakers, you should replace the headphone jack. Follow this guide to replace the Lightning connector assembly, which includes the headphone jack. A new lightning connector that contains the headphone jack can be purchased here.

During normal use, the iPhone displays a solid blue screen and reboots.

Some iPhone owners have reported seeing the “Blue Screen of Death” while using specific apps. In most cases this problem can be resolved by updating the app and the iPhone. If a specific app still causes the problem after an update, try uninstalling the app.

Many users have encountered the “Blue Screen of Death” on their iPhones after a recent iOS update or after restoring their iPhone from a backup. An error in the update or a corruption in the backup could easily cause this problem. Try updating the iPhone through iTunes, or restoring the iPhone to factory settings.

After powering up, the iPhone displays a solid blue screen and continually reboots.

The Home Button Flex Cable or Front Camera and Sensor Cable may have been damaged due to an accident or during the course of a repair. Damage to either one of these cables may cause the solid blue screen. Use the Front-Facing Camera and Sensor Cable and Home Button Ribbon Cable replacement guides to remove these components for inspection, and replace them if necessary.

The “Blue Screen of Death” in the iPhone SE is often caused by mismatching screws during a repair. Many repairs on the SE require the removal of the front panel assembly cable bracket. The bracket has four screws: Two 1.7 mm Phillips #000 screws, one 1.2 mm Phillips #000 screw, and one 1.3 mm Phillips #000 screw. Accidentally using either the 1.3 mm or 1.7 mm screws in the bottom right hole of the bracket will result in significant damage to the logic board, causing the phone to no longer boot properly.

If the iPhone is showing the “Blue Screen of Death” after a recent repair, measure these screws and make sure that they’re installed in the proper locations; the phone may then boot properly. If the problem persists, the logic board may need to be repaired or replaced.

After powering up, the iPhone displays a solid red screen. The phone may continually reboot.

The most common cause of the “Red Screen of Death” is damage to the Front Camera and Sensor Cable. First, force restart the iPhone. If the problems persists, use the front-facing camera and sensor cable guide to disconnect the flex cable from the logic board, and then reboot the iPhone. If the iPhone boots up without showing the red screen, go ahead and replace the cable.

A new cable can be purchased here.

Following a home button replacement, Touch ID features stop working.

As a security feature, your home button's embedded Touch ID fingerprint sensor is uniquely paired to your iPhone's logic board at the factory. If the original home button assembly is replaced, damaged, or disconnected, Touch ID features will cease to function.

Your iPhone is behaving erratically or displays the text "Use iTunes to restore" on startup

It isn't often that Apple gives specific directions about how to fix your problem! Restoring the iPhone SE will erase everything on it, so make sure everything on the iPhone SE is backed up prior to restoring. To restore, connect your iPhone SE to a computer with iTunes installed. Click "Restore" on the iPhone SE summary page (click on your iPhone icon on the left menu to find this page). Follow the directions to restore. If your iPhone SE displays the text "Please wait. Very Low Battery," leave it plugged in. This charges the iPhone SE enough to be able to restore safely. If the iPhone SE hangs on this screen for long periods of time, you may need a new battery.

A new battery can be purchased here.

If your iPhone SE hangs while displaying only the Apple logo, or exhibits some other software problem that prevents iTunes from recognizing it, you can force it into recovery/restore mode and then use iTunes to restore the software.

If the device is powered off, plug one end of your USB cable into the iPhone SE and leave the other end disconnected. Press down on the Home button, and keep holding it down while you plug the USB cable into your computer. After 5-10 seconds, you should see a "Please Connect to iTunes" image on the iPhone SE, and iTunes should prompt you to restore the software; follow the prompts and the instructions given above.

If the iPhone is powered on, hold down both the power and home buttons until it reboots and displays the "Connect to iTunes" image (generally, 5-15 seconds).

Hardware issue that stops the update or restore from completing; probably a motherboard issue.

Message "The required resource can't be found."


  • Your version of iTunes is out of date. Get the latest version of iTunes, then try to update or restore again.
  • Your device has a beta version of iOS.
  • You are downgrading (trying to install an earlier version of iOS).
  • Your device is jailbroken. Hard reset it before updating.

After an accidental spill or a drop in the sink, your iPhone no longer works correctly.

As soon as possible, perform the following:

  1. Immediately remove the iPhone from the liquid (if safe to do so). Minimize the length of time your device is in contact with liquid to prevent corrosive damage.
  2. Turn the iPhone off. (If it was off already, do not turn it on.)
  3. Skip the rice. Contrary to what you may have heard, rice is not an effective or lasting fix for water damaged electronics.
  4. Open the iPhone and disconnect the battery. (See your iPhone’s battery replacement guide for the correct procedure. You don't need to completely remove the battery; simply disconnect the battery connector from the logic board.)
    • Liquid damage may complicate disassembly. Beware of cables and connectors that may be "adhered" to other components in unexpected ways.

At this point, inspect the interior of your iPhone and try to determine the extent of the liquid damage.

  • If your iPhone's interior looks completely dry:
    1. Whew! You may have dodged a bullet. Check the water damage indicators, look around the ports and SIM card tray, and inspect the battery connector carefully for signs of liquid or corrosion.
    2. If you notice any sign of liquid intrusion, skip to the next section below.
    3. If everything looks bone dry, you might not need to do anything further. Give your phone a couple hours to air out, re-connect the battery, power it on, and test all functions. If you notice any problems, continue to the next section below.
  • If you see only a little liquid inside the phone:
    1. Use the iPhone SE repair guides to begin removing components.
    2. As you remove each component, check it carefully for signs of liquid or corrosion damage. Wipe any liquid and/or corrosion away carefully with isopropyl alcohol and a clean, soft nylon brush, such as a toothbrush, and allow it to air dry.
    3. Continue disassembling until you no longer see any signs of liquid intrusion.
    4. When all components are clean and dry, re-assemble your iPhone with a new battery.
      • Do not attempt to re-use a battery that has been in contact with any liquid.
    5. Power on your iPhone and test all functions. If you notice any problems, continue to the next section below.
  • If the interior components are mostly (or totally) covered in liquid:
    1. Use the iPhone SE repair guides to take your iPhone apart completely.
    2. Clean each component, cable connector, and socket carefully with isopropyl alcohol and a clean toothbrush.
    3. Submerge the logic board in isopropyl alcohol (or use an ultrasonic cleaner, if available). Allow it to soak long enough to loosen hardened residue, and to displace any remaining water or other liquid.
      • Use the toothbrush to scrub visible corrosion and residue from the logic board. Clean all connectors, chips, and fuses.
      • Repeat cleaning if necessary, or if traces of residue are still visible.
    4. When all components are clean and dry, re-assemble your iPhone with a new battery.
      • Do not attempt to re-use a battery that has been in contact with any liquid.
    5. Power on your iPhone and test all functions.
      • For any particular function that fails, replace the associated component with a new part, and then re-test.
      • If problems persist, a board-level repair may be necessary. We don’t yet have comprehensive guides for board-level repair, so you may wish to consult a microsoldering specialist for more options.
Sours: https://www.ifixit.com/Wiki/iPhone_SE_Troubleshooting
iPhone SE 2 (2020): How to Fix Black Screen (6 Easy Solutions)

And you had a good time, for two whole years I thought that Marina loved me - Alexey said. She really loves you, she promised to leave this job after her studies. - Olga made excuses. But Alex, silently, got up, gave the box with the ring to Olga and headed for the exit.

Similar news:

There is. Almost whole. A little more and the can is inside my ex-wife's sister. I cant hold back anymore, I finish on her back.

28931 28932 28933 28934 28935