Anycubic mega x

Anycubic mega x DEFAULT

Imagine you’re rolling through the McDonald’s drive-thru and you order a Big Mac, fries, and a Coke. Classic order. Good on you. Now, you ask them to supersize it. Because you simply can’t get enough of the greasy goodness.

Apply this logic to the Anycubic Mega S. That’s what Anycubic did when they made the Mega X. It’s like a supersized Mega S, with all the same great features in a bigger package. It’s a mid-sized FDM printer that’s definitely worth your money.

Are you looking for a great 3D printer that rings up at less than $500 and meets, or even surpasses your expectations? Then you may have come to the right place.

Specifications

  • Technology: FDM
  • Weight: 14kg
  • Printer dimensions: 500mm x 500mm x 553mm
  • Arrangement: Cartesian XZ head
  • Build volume: 300mm x 300mm x 305mm
  • Feeder system: Bowden drive
  • Extruder type: Single
  • Maximum extruder temperature: 250°C
  • Nozzle size: 0.4mm
  • Layer resolution: 0.05-0.3mm
  • Print chamber: Open
  • Print Bed: Heated bed with Anycubic Ultrabase
  • Bed leveling: Manual
  • Maximum heated bed temperature: 90°C
  • Frame: Metal
  • Display: Color touchscreen
  • Connectivity: USB, SD card
  • Wi-Fi: No
  • Built-in camera: No
  • Filament sensor: Yes
  • Filament diameter: 1.75mm
  • Materials: PLA, ABS, HIPS, wood
  • Third party filaments: Yes
  • Slicer: Cura
  • Operating systems: Windows, Mac, Linux

Setup

The Anycubic Mega X only comes semi assembled, but putting it together is pretty simple. It’s packed neatly in the box and the instructions identify exactly what everything is and how to attach it. You can view the instructions via a paper manual or the USB stick provided.

Anycubic provides clippers and a spatula, as usual, but the Mega X also ships with a 1kg spool of PLA. Spare parts include PTFE tubing and a hot end.

Assembly mostly includes mounting the gantry on the base with a few screws. Connect some cables together, set the MeanWell PSU switch to the correct voltage, and you’re done in minutes.

Before printing, you’ll have to level the bed manually. The printer has large adjustment knobs that make this task rather trivial. You can auto-home the print head and adjust the knobs as needed, leveling with just a sheet of paper.

Some budget 3D printers use tiny knobs to achieve the task of leveling, making it really difficult, so in comparison, the Anycubic Mega X makes it boring, but easy. There’s no need to endure the torture of small, hard to reach knobs anymore.

Features

Anycubic gained some market traction at the low end with their i3 Mega and then followed it with an improved version in the Mega S. After gaining user trust, they kept the same design and ease of use they knew worked but improved the scale with the Mega X.

Compact, smart design

The base unit of Mega X includes the mainboard, power supply, and touchscreen. The cable management is neat, which is a welcome change compared to a lot of other budget units that come with wads of cables all jumbled together.

The metal frame offers a robust, sturdy chassis. The Z-axis features led screws and the Y-axis carriage runs along dual rails, supporting the bed, and making the entire structure even more steady.

This printer has a solid foundation that offers consistent printing. Not only is this rarely found in the budget price point, but the Mega X also features dual Z-axis end stops. It can combat unevenness you may find in the X-axis and relevels the X-axis every time it returns home.

It has mechanical end stops on the X-axis, but it uses a contactless sensor for the Y-axis end stop. This offers a more premium design that maintains a look and feel far above its price point.

Anycubic Ultrabase

The Anycubic Ultrabase has set the precedent for many bases to imitate. It’s a 300mm x 300mm bed sitting on top of four screws for manual leveling. While it’s roomy, it’s also innovative. This glass bed is coated with a porous material that offers excellent adhesion while making it easier than ever to remove your jobs when they’re complete. It’s especially unique when printing with PLA.

It can heat to 60°C in two minutes with a maximum temperature of 90°C. It also does a fantastic job of distributing this heat across the entire surface, enabling effective adhesion for quality prints without huge flaws.

This is exceptional for large print surfaces, especially when it comes to preventing warping. It can still be a problem when printing with ABS, but it’s to be expected when the temperature maxes out at only 90°C.

Single extruder

This single Titan extruder has a hot end capable of a maximum of 250°C. It uses PTFE tubing to help filament navigate its way to the melt zone. It’s nearly impossible to print hotter than this without getting off-gas of the PTFE, which can be toxic.

This is more than hot enough for consumer materials, so it’s a fantastic feature in a budget 3D printer. You should have no problem using Mega X at around 245°C with PETG, which is a high temperature material.

The downside to Anycubic filament holders is that they stick out sideways on the bottom. While it takes some of the weight off of the frame, it means the filament gets fed upside down.

This, combined with the filament runout sensor, which is mounted on the side of the gantry, means the filament is constantly strained. However, thanks to a feeding mechanism that works well, you’ll get continuous feeding.

It just takes some working with to change the filament, because it’s inserted upside down. Thanks to the plastic funnel that Anycubic provides, you can easily guide your filaments into the gear mechanism.

Rigid filaments are much easier to insert than flexible ones, as you might expect.

Connectivity

One of the most important things about 3D printing is your ability to oversee the print process, even when you’re not actively designing your print. With a 3.5-inch color touchscreen (something you more frequently see on higher end 3D printers), you have all of the options you need.

The menu can be somewhat confusing, but the software has everything you need to set up the printer just the way you want it. You can load your prints via a USB cable or an SD card.

Unfortunately, aside from what’s already been mentioned, there’s nothing new over the Mega S. Given that there’s a few years difference in release date, many users are disappointed by the lack of updates here when it comes to Wi-Fi, quieter printing, or auto bed leveling.

Performance

If you’ve had any experience with the Mega line before, you know that they produce great results for the price you pay. You’ll see this theory confirmed in Mega X, too.

Just like any other budget 3D printer, you’ll likely have to make some adjustments to get your Mega X to function properly. However, that’s not uncommon.

Thanks to the Anycubic Ultrabase, your prints will adhere well and easily pop off when they’re done. This adds to your overall experience by making it more seamless throughout. The best thing about it is you don’t have to use glue, which makes it a messy and less than a desirable affair.

It leaves your print surface looking like it did when you took it out of the box, but it also gives your print projects smooth first layers for an aesthetically pleasing result every time.

Mega X can handle many different materials, but it’s all based on your technical settings. While some flexible filaments will come out flawlessly, others will tangle up in the gear mechanism helplessly.

You’ll have to adjust the print and feed speed accordingly to get to a manageable flow without any backing up or coiling. It can be a bit of trial and error, which is excruciating at times, but once you get there, it handles almost anything like a champ.

Unfortunately, you may never find a way around the warping of ABS. No matter how much you change the temperature or fan settings, the Mega X just isn’t suited for something as finicky as this temperature sensitive material.

The upside is that it still handles PETG and PLA well, so you’re not limited in your choice of materials.

Usability

Mega X allows you to use any open source slicer. While Cura remains one of the most popular options, you can use anything you’re comfortable with, which opens up the usability of the machine quite nicely, although Anycubic recommends Cura.

While the UI can be confusing, the menu items are large and easy to read. You may find at times that the submenus are unclear and contain tools that don’t seem to belong. The button press sound can also be quite obnoxious.

And while the Mega X is a sturdy machine, it’s also a noisy one. The Z-axis screws are the most deafening, but they only move when homing at the beginning of the print. The other aspects of the printer aren’t particularly quiet, either, from the drivers to the cooling fans.

The filament runout sensor works well, and once reloaded, the print job will pick up where it left off without any problems. The downside here is that it’s a mechanical sensor that will only trip with a lack of filament, rather than a costly optical sensor that will trigger with a filament blockage.

The print resume function works less than ideally. Sometimes it resumes the print after a power outage, and sometimes it doesn’t, leaving you to start your job over from scratch.

Alternatives

If you’re seriously considering a budget 3D printer like the Anycubic Mega X, you may also want to take a look at the following options before making a buying decision.

Anycubic Mega S

This previous iteration sports the same sturdy build and nearly identical features. The build volume is about two-thirds the size, at 210mm x 210mm x 205mm, an 3d it’s quite a bit cheaper, too.

It’s a great option if you don’t mind the smaller print volume but you want all of the same features. You really won’t miss a thing and your wallet will be a little fatter from the cash you saved.

Anycubic i3 Mega S | Amazon
Anycubic i3 Mega S | Amazon

One-piece hanging design, simple and beautiful. The feeding of filament is smoother and the storage of filament is more convenient.

Buy at Amazon.com

We earn a commission if you click this link and make a purchase at no additional cost to you.

Artillery Sidewinder X1

The Sidewinder X1 was Artillery’s first attempt at a 3D printer. It’s another budget solution with a sleek look, but it has a bigger build volume of 300mm x 300mm x 400mm. It also has a direct drive system.

While the print quality out of the box isn’t quite as good as the Mega X, it can be really great for a budget solution if you spend some time getting the settings just right. Plus, with the exceptional print volume, you really won’t find much else in this price range that offers quite as much.

Original Prusa i3 MK3S

This printer is slightly more expensive but still rings up at under $1000. However, it has almost everything you’d ever want right out of the box. It heats up quickly, has a flexible metal build plate, and features a direct drive system.

The excellent print quality leaves little to be desired, and the automatic bed leveling makes setup a breeze. You’ll get a really great value out of this printer, so while it may not be a budget solution per se, it might just be the best option on the list.

Original Prusa i3 3D Printer Kit | Amazon
Original Prusa i3 3D Printer Kit | Amazon

This provides a great print setup with the printer so you don't have to dive into complex new programs by the time construction is done. You can start printing right away! Of course, you can dive into the repaired.

Buy at Amazon.com

We earn a commission if you click this link and make a purchase at no additional cost to you.

FAQs

Is owning a 3D printer worth it?

It’s really cool learning how to print in 3D, but not everyone may find it valuable. You can spend a lot of time and money on it and it may not end up being worth it for you, resulting in a huge strain on your budget.
Thankfully, budget 3D printers offer a great entry point into the world of 3D printing, so you can get your feet wet before spending too much money. Any of the 3D printers here are great budget options for you if you’ve never done it before.

Can you make money using a 3D printer?

Sometimes you can sell items you make with your 3D printer and you can even use your at-home 3D printer as a commercial services on websites like Hubs. Just list it as a service or take orders for prints.
Just remember that poor quality items and printers won’t make as much money, so it’s probably not a good idea to do it with a budget printer. However, if you upgrade to a more professional device, this may be an option.

What are the disadvantages of 3D printing?

3D printing is fun, but there are always disadvantages. In the world of budget 3D printing, one of the main disadvantages is a lack of features. You’re not going to find the build volume or the range of materials that you would find in a more expensive, professional quality printer.
You’re also not going to get the same high quality results. Design inaccuracies will leave you with imperfect prints, and if you’re not careful, you can struggle with copyright issues.

Is it cheaper to build a 3D printer?

If you’re looking at building a quality 3D printer made out of high performance parts, it’s generally cheaper to buy the parts individually and build it yourself. However, if you’re entering the 3D printing world at the budget level, you’re better off spending a few hundred bucks on a budget printer.

You have to keep in mind that building a 3D printer isn’t easy. You have to get the right components and know what you’re doing, or the printer won’t work. It’s a big time commitment, and if you’re going to but a cheap 3D printer, it’s well worth spending the money to save yourself the time.

The Verdict

The Mega X is a great, large volume budget 3D printer. The Anycubic Ultrabase gives you a seamless experience all around while the print quality may just exceed your expectations.

It has a sleek appearance with a sturdy build. Despite the price, they chose not to include any cheap parts. Plus, with steel construction, once you set up the printer, there’s no need to go back and readjust it later.

The large touchscreen makes it easy to use and the ability to use your own choice of open source software open up its usability to anyone who has their own personal preferences.

It doesn’t differ much in terms of features from the Mega S and it would have been nice to see some improvements like auto bed leveling and Wi-Fi connectivity, but for those who like the Mega series and want the extra build volume, it’s a great option.

 

Sours: https://total3dprinting.org/anycubic-mega-x-review/
Anycubic Mega X prints

The Anycubic Mega X is an excellent choice for budget-conscious users who want to enjoy the benefits of a large build volume without sacrificing quality.

Pros

  • Massive build volume: 300mm x 300mm x 305mm
  • Great print quality, especially for the price
  • Sturdy construction
  • Relatively small footprint
  • Nice, glass-like build plate/print surface

Cons

  • Required some initial fine-tuning
  • Arrived with a loose X-axis belt (easy fix)
  • Confusing interface
  • No wireless connectivity

Ideal for

  • Beginners
  • Intermediate and advanced users
  • Teachers
  • Students
  • Small business prototyping and small-scale production
  • Users looking to make large prints
  • Users looking to print many models at once

Is it worth it?

Yes. Overall, at $399, this is a great large-scale budget 3D printer. The Mega X is a solid buy that produces high-quality prints with little fuss.

Specs

Anycubic Mega X Specifications
Price$399
Printing TechnologyFDM (Fused Deposition Modeling)
Layer Resolution0.05-0.3 mm
Positioning AccuracyX/Y 0.0125mm Z 0.002mm
Supported Print MaterialsPLA, ABS, TPU, HIPS, Wood
Print Speed20~100mm/s (60mm/s suggested)
Nozzle Diameter0.4mm
Build Size300 x 300 x 305mm
Operational Extruder TemperatureMax 250ºC
Operational Print Bed TemperatureMax 100ºC
Printer Dimensions500mm x 500mm x553mm
Input Formats.STL, .OBJ, .DAE, .AMF
Ambient Operating Temperature8ºC - 40ºC
ConnectivitySD Card, USB serial port
Net Weight~14kg
Anycubic Mega X first impressions

Build plate is huge

First, let's talk about size. At 300x300mm, the bed on this thing is huge. If you're asking yourself, "When do I print large objects?" then you're asking the wrong question. You should be asking yourself, "How many things can I print at once?"

Finally, we're NOT gonna need a bigger bed.

There's a fixed and variable cost to 3D printing in terms of your time. Slicing and placing the models, prepping the printer, cleaning the build surface, checking on the printer, removing prints, and other common tasks really add up. In addition, when you're doing a multipart print, you can't print things in parallel with only one printer. On one printer, two 8-hour prints still take 16+ hours to prep and print.

In other words, having a massive bed is simply amazing—especially after experiencing my Ender 3's measly-by-comparison 220x220mm build plate. I was able to arrange a ton of prints, all at once, and come back to a bunch of completed models—a full OctoPrint assembly, test vase, and Benchy—with tons of room to spare. No more multi-day prints from the same printer.

Frame is rigid and sturdy

The stamped metal frame is thick, heavy, and leaves little to be desired. There doesn't appear to be any "flex" on any axis.

Most parts are encapsulated in the base

The power supply, logic board, display, and most of the innards are housed in a sturdy metal box at the base of the printer. This means a smaller tabletop footprint for the size of the printer—a feat nearly ruined by the filament holder (more on this later).

This rigid base also means you're less likely to need to level the printer after moving it. In comparison, many printers inadvertently level themselves to the tabletop they're on.

Surprise filament sensor

This thing has a filament sensor, a feature usually found only in higher-end printers. This sensor will pause your print if filament runs out. I don't see myself using this feature much since I don't run massive multi-day prints and usually have plenty of filament on hand, but I can see where this comes in handy on such a large printer.

Huge leveling knobs

Anyone who's manually leveled a printer knows how much of a pain it can be to turn those small leveling knobs. Well, Anycubic really outdid themselves: massive knobs are coupled with a very fine thread count on the bed-leveling screws. As a result, you can turn each knob with a single finger.

The result is you can turn each knob with a single finger.

Why is this important? Well, when turning small leveling knobs in tight spots with your entire hand you can inadvertently apply upwards pressure on the build plate. When you release this pressure, the plate moves back down—so you're really screwing with your leveling. I was surprised by how much this made a difference.

Interesting build plate material

The build plate is made out of some sort of glass material with a fine mesh layer adhered on top. The result is glass-like printing without the adhesion issues normally associated with glass bed printing.

The God-awful sounds the menu makes

Want to hear the loudest PLINK sound possible every time you tap the screen, plus an insane stock audio clip while the printer boots up? Me neither. Thankfully, this can be easily and permanently disabled.

Anycubic Mega X unboxing

This thing arrived in a massive box, well-packaged in tons of foam. It's hard to tell from this photo how large the box is, but it's kind of ridiculous.

In the box

In the box you'll find:

  • The printer itself
  • Wire cutters
  • 10x M5 screws
  • Print scraper (but without a hole for hanging, making it useless for my workshop layout)
  • Misc. hex keys and other tools
  • Cables and wires
  • Card reader
  • SD card
  • User manual
  • Tweezers
  • A very generous 1kg PLA spool, though it wasn’t vacuum-sealed for some reason
  • Backup hotend set! Not sure if this is a good thing or foreshadowing of things to come.
Anycubic Mega X assembly

Time

Like most 3D printers on the market today, the Mega X came in only a few pieces, taking just 20 minutes to assemble. Gone are the days of spending ages assembling your new 3D printer.

Gone are the days of spending ages assembling your new 3D printer.

Instructions

The included instructions are as confusing as any other 3D printer instructions. Luckily, there are a limited number of steps which reduces confusion and assembly complexity.

Grab a friend

Despite what the instructions say, you will definitely need two people to assemble. The bottom bracket that you're instructed to remove has wires zip-tied to it, so a single-person-assembly would mean removing these wires and zip ties, which is not advised.

Difficulty

Overall, assembly is very simple; remove one of the cross-support bolts (the one with the wires zip-tied to it), have someone pick up the front of the printer, and slide the frame to the center of the printer. Then, tighten four bolts on each side.

One very funky thing is that if you reattach the frame bolt you removed earlier, the printer will wobble—the frame sits slightly lower than the 4 feet, even on a level surface. This is VERY silly but the solution is easy and won’t affect rigidity: just leave one bottom frame bolt out. This might have just been an issue with my specific unit.

Next, attach the filament sensor holder and the filament spool holder. The filament spool holder is made from cheap, stamped steep. It looks kinda silly, sticking out of the side at an odd angle like it was a complete afterthought. I can’t wait for someone to design a better one that takes up less table space.

Finally, connect the cables—there are only four of them and the connectors are all different, which is great.

Tips

PSU comes pre-configured as 220V. On every printer I've ever received (10+), a giant sticker on the printer warns you to switch it to the proper voltage for your country. This is mentioned in the instructions, but assembly is so straightforward that many people will skip the instructions. Don't forget to change the PSU voltage according to your country (110V in the US).

Again, set the correct PSU input voltage or you and your printer are going to have a smoky time.

Anycubic Mega X bed size

As I mentioned earlier, the Anycubic Mega X features a massive print volume of 300mm x 300mm x 305mm. This is absolutely enormous, even when compared to other large-scale budget 3D printers.

Again, the benefit of having such a large build size isn't solely to print large objects. While this is obviously a plus, I've mostly enjoyed the freedom of printing large multi-part models—or just several different models—all at once. I'm about to embark on a long RV trip, and I needed to print a number of holders, hangers, mounts, and refrigerator replacement parts. I was able to print everything in one go, with the print finishing overnight.

Here's a quick size comparison of other popular Anycubic printers (and my main printer, the Creality Ender 3):

PrinterWidth (X, in mm)Depth (Y, in mm)Height (Z, in mm)
Anycubic i3 Mega210210205
Anycubic i3 Mega S210210205
Creality Ender 3220220250
Anycubic Mega X300300305

The result is a striking 30% increase in build volume over the existing i3 Mega series.

Anycubic Mega X y-travel desk and table depth

Like other Anycubic printers, most of the Mega X's components are housed in the base of the unit. This means the printer takes up less horizontal space on your desk or table. However, the awful spool holder juts out of the side like a harpooned whale, increasing its overall footprint immensely. This is a spool holder that screams, "We forgot to add a spool holder. See what you can slap together." But not to worry: I'm sure someone will design a better filament holder pretty quickly.

This is a spool holder that screams, "We forgot to add a spool holder. See what you can slap together."

Surprisingly compact

Nonetheless, the printer is pretty compact given its build size. Its approximate desk footprint (excluding the filament holder) is 20" wide x 19" deep. Including full Y-axis travel, the printer extends to about 25" deep. In other words, the maximum depth the printer will ever encompass is 25".

Important note on desk depth

A large build plate means a large Y-axis travel distance. In other words, if your narrow desk is up against the wall, the build plate will hit the wall and [probably] push the printer off the table.

A large build plate means a large Y-axis travel distance.

The absolute minimum length from the front of your table to the back wall is 22.5", and the minimum table depth (for the printer's rubber feet) is 18.5". Make sure your table is both deep enough and far enough from the back wall to account for travel.

Anycubic Mega X test prints

As expected based on the other printers in Anycubic's Mega line, the Mega X produces high-quality prints with little fuss.

First prints

My first print did not go well. I didn't notice that the X-axis belt was noticeably loose, so I had tags and small blobs appearing over the X-axis. This was easily fixed in about 30 seconds by clipping off the 3 tensioning cable ties, tightening the belt, and then adding new cable ties.

My next print went very well. I did experience a small amount of stringing, but this was due to using incorrect Cura settings—my extruder temperature was set too high for the filament I was using, and I'd ramped the travel speed up too high.

Once I dialed in these settings, subsequent prints came out perfect, matching the print quality of my Creality Ender 3.

Anycubic Mega X leveling

Manual leveling

Like most budget 3D printers, the Anycubic Mega X features manual bed leveling. Thankfully, this printer has large adjustment knobs that make bed leveling a breeze. Just auto-home the printer and then slip a piece of paper around all 4 corners in an X pattern, adjusting each knob as needed.

The large knob design and super-fine leveling screw threads make it easy to make micro-adjustments without using your whole hand. Since my hands are gigantic, I have a huge problem leveling my Ender 3 where my hand pushes the build plate up while I'm turning the knob, making leveling a real chore.

Anycubic Mega X build quality

Overall, the build quality of the Mega X is exemplary. It is primarily comprised of stamped steel panels that have good fitment and feel solid. Nothing about the machine looks or feels particularly cheap, unlike many other budget printers I've reviewed.

The only build quality issue I've had, as mentioned in the Assembly section, is that the bottom support rail was slightly bent, meaning I couldn't reattach it without it making the printer wobble. I left the screw out of this rail and it's had no measurable impact on flexure or print quality. That rail is meant primarily to guide a set of wires beneath the printer and is not structural.

Anycubic Mega X motion system design

The Anycubic Mega X didn't skimp on the motion system design. For example, while lots of budget 3D printers only provide a single Z-axis rod, the Mega X features two. This results in less wobble and better prints. Additionally, the wide, stable Y-axis double aluminum carriage improves stability and prevents bed rotation.

Like other printers, concentric wheels can be adjusted to reduce bed wobble. The wide, heavy base containing the Mega X's PSU and core electronics provides further stability, especially on uneven desks and tables.

Belt tensioning

The only things that could really use improvement are the belt tensioners. When my printer arrived, the X-axis belt was noticeably floppy and my first print looked awful—but only in one direction. To tighten the belt, you need to clip off the three small zip ties holding it in place, pull it taut, and then tighten it with some new zip ties. This was kind of a pain but only took about 30 seconds to fix.

Anycubic Mega X MeanWell PSU switch

One huge surprise on the Mega X is that it utilizes a MeanWell power supply unit (PSU). I wrote an entire Ender 3 MeanWell PSU upgrade guide that explores the benefits of a MeanWell PSU if you'd like to explore this topic further.

To summarize:

  • The MeanWell PSU uses higher-quality components, making for a safer power supply.
  • These higher-quality components provide cleaner power, resulting in better prints and less chance of failure.
  • The MeanWell PSU's fan only runs when it needs to, making your printer whisper-quiet when powered and not printing, and quieter overall while printing.

The PSU also features a fused plug, an absolutely necessary safety feature for any 3D printer.

Once again, remember to change the voltage selector switch to whatever mains voltage your country utilizes.

Anycubic Mega X printing on Ultrabase Platform

The bed material immediately struck me as clever and novel. Anycubic calls it the "Ultrabase Platform." It's comprised of a heated layer of aluminum topped by a thin layer of what appears to be borosilicate glass with a fine layer of mesh on top.

The top layer features small holes, or pores, that expand when heated and contract when cooled. This means you get all the benefits of printing on glass without the hairspray or glue sticks.

I did have one print that still needed hairspray adhesion, but it's possible the bed temperature wasn't set high enough.

Anycubic Mega X bowden tube

This is barely worth mentioning since all FDM 3D printers now seem to feature a Bowden tube-type extrusion system. In a nutshell, the extruder stepper motor lives off to the side and filament is passed to the heating element and nozzle via a flexible, translucent plastic tube. The result is a lighter print head, meaning faster print speeds and less "lashing."

I don't like how the Bowden tube rubs against the Z-axis ball screws though. I imagine it will wipe all the grease from the guides over time. Perhaps I'll design a holder to safely move it out of the way.

Anycubic Mega X interface

At least until you set up OctoPrint, you'll be interacting a lot with the Mega X's touchscreen to control your printer and start prints.

Overall, I give the screen and user interface a C+. Don't get me wrong—it works correctly and doesn't crash. The 3.5" color display's viewing angles are ample (unlike many non-IPS displays), so you won't need to crane your neck over and over again. The touch digitizer is responsive and the menu items are large enough to easily tap without the need for finger-sniping.

Overall, I give the screen and user interface a C+.

Confusing interface

My problem with the interface is that the menu system is confusing. You really have to navigate through it to understand where I'm coming from. Basically, there are several menus, and each menu item is comprised of a button with an icon. The problem is that tapping some menu items will bring up an additional menu while tapping others will perform some action.

For example, tapping the “temperature” icon brings up a temperature menu, but tapping the “cooling” icon toggles all heaters off—rather than bringing up a “cooling” menu. Navigating forward and backward is a bit confusing too.

Horrible sounds

Prepare yourself for a teeth-chattering PLINK noise every time you tap the screen—and a startup animation and audio clip that will drive you mad. Thankfully this can be disabled in Setup by unchecking "Voice," which I recommend doing immediately. Throw caution to the wind and never look back.

Not terrible

Overall, the menu does work properly, and I'm sure the interface will be improved with future firmware updates. Either way, crappy 3D printer user interfaces are certainly "par for the course" and the reason that libraries like OctoPrint exist.

The Anycubic Mega X USB port and SD card print interfaces

Printing on the Anycubic Mega X is similar to any other FDM printer.

Software/slicing

For slicing your models, I recommend using Cura—as does the manufacturer. However, because the Anycubic Mega X is so new, you'll have to configure everything manually. I wrote an Anycubic Mega X Cura guide to help you with this.

Loading prints

Printing is straightforward–just put your file in any directory on the SD card and insert it into your computer. An SD to USB adapter is included with the printer, making this process easy. Unfortunately, wireless printing isn't available (at least until you set up OctoPrint).

After inserting the SD card, a few taps of the print menu will start your print.

One big issue with loading prints is that the printer recursively searches the SD card for any file. This means that if you delete a file and it ends up in the SD card's directory, the file still appears on the print screen. For this reason, I recommend you delete the directory regularly, or choose a new name each time you save a file. This is super annoying, especially when macOS might move an old file to the directory when you replace it with a new file of the same name.

Supported print materials

Unsurprisingly, the Mega X supports printing in the following 3D print materials:

Print resume

The Mega X auto-pauses on power loss and filament runout, which is super handy.

Prusa MK3S 3D printer review

The Prusa i3 is an open-source, self-replicating printer. There are many great 3D printers on the market that are based on Prusa's designs.

Continue reading

Sours: https://howchoo.com/g/mzm1ntdkyjq/anycubic-mega-x-review
  1. Harry styles yellow glasses
  2. Nail gun hanger hook
  3. 16 line color quran

Anycubic Mega X

The big brother of the legendary i3 Mega S!

Anycubic has become one of the most popular 3D printer brands on the market due to its great commitment to research and development. With its corporate philosophy of producing simple, affordable and nevertheless high-quality products, the brand appeals to both hobbyists and professional users.

The Anycubic Mega X is the larger version of the popular i3 Mega S, with a build space of 300 x 300 x 305 mm. Also new is the high-quality Meanwell power supply, which ensures an even safer and more powerful power supply.

After receiving the Anycubic Mega X, it can be assembled quickly and easily and is ready for the first 3D print after just a few steps. With the instruction manual, assembly is uncomplicated, even for beginners.

The Anycubic Mega X has a very stable frame that significantly reduces vibrations and thus increases the print quality at the same time.

Like its little brother, the Anycubic Mega X is also equipped with the new filament holder. In the simple and beautiful design, the filament hangs on the holder and enables the filament to run more evenly.

Also worth mentioning is the Ultrabase bed surface, which offers a very good hold while it is heated. When it cools down, the hold is reduced and the finished model can be easily and conveniently removed.

Other great features are:

  • High-quality extruder for more precise extrusion
  • Colour touch screen for easy operation
  • Filament sensor
  • Comprehensive starter package
  • Auto-resume function against unexpected power interruptions
  • Precise printing
Sours: https://www.3djake.com/anycubic-3d-printer-and-accessories/mega-x

Intro

Anycubic is a well-respected 3D printer manufacturer based in China and they make high quality machines. The Anycubic Mega X is one of the latest machines they’ve created and it satisfies many desires that people have been wanting in a 3D printer.

The Anycubic Mega X is built for massive build volume coming in at 300 x 300 x 305mm which is able to print models that a majority of 3D printers out there wouldn’t be able to manage. It’s a great choice for beginners as well as experts in the 3D printing field, so don’t feel intimidated by the size just yet.

Not only do you have build volume, but characteristics such as precision, accuracy and high quality really take this 3D printer at the forefront of the competition.

Keep reading on to find out whether the Anycubic Mega X 3D printer is one that you should have beside you. I will go into more detail about its features, specifications, benefits, downsides and other useful things you’ll want to know.

The are many features and benefits that come with the Anycubic Mega X that make it such a worthwhile 3D printer to get for yourself. From it’s extremely competitive price to it’s high quality manufacturing it’s really a no-brainer.

I’ve done some extensive research on this 3D printer and it really does check the boxes you want it to. From unboxing, you place your eyes on a thing of beauty. Setup should only take you around 10 minutes, if that. The packaging is neat, secure and done in such a way that it won’t have issues in any kind of transit. You have many extras such as your 1KG roll of white filament, hotend backup and all the main tools you need for 3D printing.

You’ll be given an SD card with test prints where you can watch your Anycubic Mega X lay down each layer with great precision and accuracy. Simply download the Cura slicer, configure your settings with the Mega X printer then slice your desired files and save them onto the provided SD card.

Prints with this 3D printer will come out as good as any premium 3D printer out there. Forget the back and forth tweaking and hoping that things come out acceptable, you’ll get high quality from the start.

From the sturdy frame, to high quality prints, to great price point it’s hard to bring forward any negatives when it comes to this printer. It’s a large low-maintenance system with easy bed-levelling, thermal runway protection already installed and a standard filament run-out detection sensor.

After-sale customer service goes above and beyond to make sure you’re satisfied with your purchase and you can just focus on the fun side of 3D printing.

Now that I’ve given you a glimpse of the journey you can look to expect, lets get into some sweet details about the Anycubic Mega X 3D printer.

Features

  • Rigid Metal Frame
  • Y-Axis Dual Sideways Design
  • Z-Axis Dual Screw Rod Design
  • Powerful Extruder
  • Filament Sensor
  • TFT Touch Screen
  • Backup Hotend Set
  • Comes with 1KG of Filament
  • Large Bed-Levelling Knobs
  • Large Build Volume
  • Patented Heatbed
  • Resume Print Function
  • Meanwell Power Supply (UL Certified)

Rigid Metal Frame

Any 3D printer you buy you want it to be sturdy so it decreases vibrations, leading to better quality prints. When you have a loose, vibrating frame, it can have a direct effect on printing quality because your nozzle won’t be as accurate. The Anycubic Mega X has made sure to tackle this problem by using solid, high quality parts.

Y-Axis Dual Sideways Design

This feature has a positive impact on the Mega X’s printing precision, allowing it to create stunning details and textures in your prints. Anycubic used customized aluminium modules for the Y axis on the head bed base, as well as a dual lead rail to vastly improve the stability of the heat bed.

Z-Axis Dual Screw Rod Design

Anycubic has reduced the likelihood of printing errors by using a solid Z-axis dual screw rod design.

Powerful Extruder

Compatible with a wide range of filaments that lower quality 3D printers have trouble handling. TPU is one of the main filaments that can be difficult to print, so you’ll be happy to know that the Anycubic Mega X can print it accurately.

Filament Sensor

The small things make a nice difference, which is exactly what having a filament sensor does for you. The printer will auto-pause if your filament runs out or breaks, leaving you the ability to change or adjust the filament to save your prints. This should save a lot of possible hassle in the future and it’s great to have. Many 3D printers miss out on this feature.

TFT Touch Screen

In the day of smartphones and quick technology we like to have responsive screens wherever we go, the Anycubic Mega X’s touchscreen shouldn’t be any different. It’s very responsive to the touch, very similar to your high quality gadgets and allows for a smooth process from start to finish.

Backup Hotend Set

It’s always ideal to have backups where you might need it in the future since anything can happen. Although the hotend is of great quality and should be a long-term part, Anycubic supplies us with a sweet backup hotend set for peace of mind and being able to act quick if anything does go wrong.

Comes with 1KG of Filament

This feature is a nice gesture from Anycubic so you don’t have to worry about having your 3D printer all set up but not having enough filament to keep things running.

Large Bed-Levelling Knobs

With older versions of 3D printers, the bed levelling knobs used to be quite small so it was harder to get a good grip and twist them. Manufacturers have used this feedback and made bed levelling knobs a lot larger so it’s easier to manage and make precise.

Large Build Volume

A whopping 300mm x 300mm x 305mm build volume for amazing space creation for all your 3D printing desires. It can print models that most 3D printers out there just can’t manage to do so you can put your creativity to better use.

Patented Heatbed

Worrying about all sorts of stickers, sprays, glue sticks isn’t ideal when it comes to 3D printing so Anycubic has made use of their patented Ultrabase heat bed surface with microporous coating. This material allows your prints to have a strong hold while printing and after cooling down, an easy to remove print afterwards. Many 3D printer users complained about this issue, so solving it was important for Anycubic.

Resume Print Function

This is a simple, yet effective feature that all 3D printers should have, but surprisingly some fall short on this feature. Being able to have a one-click resume button from your last recorded position when something goes wrong is an overlooked feature but is very important. No need to worry about power outages or someone accidentally disconnecting your printer, you’ll be able to finish your print with ease!

Meanwell Power Supply (UL Certified)

This reliable power supply is compliant with UL60950-1 so you know it’s safe and ready to last many years. It’s a world-famous brand and makes sure that you have less worries about safety, and more thoughts of flawless printing.

Specifications

  • Build Size: 300mm x 300mm x 305mm
  • Printer Dimensions: 500mm x 500mm x 553mm
  • Layer Resolution: 0.05-0.3mm
  • Printing Speed: 20-100mm/s (60mm/s suggested)
  • Positioning Accuracy: X/Y 0.0125mm Z 0.002mm
  • Compatible filaments: PLA, ABS, TPU, Wood, Copper, Rubber
  • Weight: 14kg
  • Nozzle Diameter: 0.4mm standard nozzle
  • Software: Compatible with Cura, Simplify3D and Repetier-Host
  • Technology: FDM (Fused Deposition Modeling)
  • Extruder Quantity: Single
  • Filament Diameter: 1.75mm
  • Maximum Extruder Temperature: 250°C
  • Maximum Bed Temperature: 90°C
  • Connectivity: SD card reader, and USB connectivity
  • Software Input Formats: .STL, .OBJ, .DAE, .AMF
  • Working Voltage: 24V DC
  • Input rating: 110V/220V AC, 50/60Hz
  • Certifications: UL, CE, FCC, RoHS ,EN

Benefits

Besides the arsenal of features that you get with this 3D printer you can count on getting the following benefits:

  • Comes backed with one-year machine warranty (consumables excluded) – giving you peace of mind and the safety of a reliable safety net
  • Fast assembly with easy to follow manual and tools – so you don’t spend countless hours of frustration trying to put your 3D printer together
  • High print precision – don’t settle for less, with the quality of printers today you should only receive the best quality prints!
  • Lifetime technical support – you won’t be left to figure things out yourself because you have a professional team ready to help solve any potential issues.
  • User-friendly touchscreen interface
  • Overall an easy-to-use 3D printer with features perfect for beginners
  • Improved packaging to ensure safe delivery to your door
  • All tools needed for assembly are included plus many more
  • Great quality prints straight out of the box without necessary upgrades
  • Excellent print quality with little errors
  • Very competitive price for high quality printer

Potential Modifications for the Anycubic Mega X

The Anycubic Mega X is a 3D printer which can be modified easily due to it’s design so I decided to list some potential modifications some people have done.

You can replace the fans, stepper drivers, extruder, hotend, add an enclosure, upgrade firmware.

These aren’t needed to get the amazing quality of this 3D printer but simply a choice that you can use to get that extra quality out of the Mega X.

Downsides

Nothing is perfect so although it’s a great printer, it does have its cons which I’ll explore in this section.

It doesn’t come with auto-levelling so it’s the standard 4-knob manual levelling system that most people are used to. This isn’t a massive downside, but it would have been nice to have an auto-levelling system to take the extra work out of getting accurate prints.

The glass ultra-base has been known to chip in rare circumstances but even if it does occur in that off chance, the technical support will be there to quickly rectify this potential situation.

The Anycubic Mega X can get pretty loud without some noise-reducing upgrades of a few internal components. I’ve written a pretty in-depth post about How to Reduce Noise on a 3D Printer, so this isn’t too much of a deal-breaker when deciding on purchasing this 3D printer.

Verdict

The competitive price of this printer is sometimes hard to believe but it’s a solid printer that gives great results. It’s impressive build size is what makes it such a great unique printer compared to most out there.

Users of this printer sing nothing but praises, with its very sturdy design and no movement while printing giving it great quality prints. The construction of it really is outstanding.

If you print with just PLA the hotend is great as the PTFE liner goes straight through to the nozzle, while if you plan to print ABS it won’t do you justice. This is where some modifications can be in your benefit.

The issue with the controller is not being able to swap the drivers around, so you have to stay put with the A4988 and the Chitu software but you can operate at a great level with them. You can still change the controller for a better one but it’s a cost you’ll have to absorb.

Sours: https://3dprinterly.com/anycubic-mega-x-review-buy-or-not/

X anycubic mega

She put one hand on. Mustafa's neck, forcing him to duck his head, yanked the panties out of his mouth and sharply cut the strap. The throbbing black cock exploded with semen as the eggs, which were in the balance of the burst, were drastically emptied. The ejaculation seemed endless, a whole fountain gushing into the black man's face, filling his mouth and nostrils with hot, sticky liquid.

Everything you Need to Know about the Anycubic Mega X Print Bed! - Bed Leveling, Maintenance, etc.

The sperm tasted good, and the blowjob gave me great pleasure, although I did not finish, my cock in lace panties. Was tense. Catching his breath, Max lifted me off his knees, and kissed me, not disdaining my lips soiled in his semen. I have never done such a delicious blowjob, "he said, hugging me.

You will also like:

As well as I. And my hands felt it. It's hot today. - I said, and my own hands stroked my neck, back, hands. - How about a shower.



34964 34965 34966 34967 34968